T.M. Smith Tool International Corp.
Mount Clemens, MI 48043
T.M. Smith Now Offers Complete New Line of Minimum Quantity Lubricant (MQL) Tool Holders
In response to industry's increased desire to take advantage of the benefits of tool holders that apply a minimum quantity lubricant (MQL) design, T.M. Smith Tool International has developed their own line, Fig. 1, of MQL tool holders for HSK, V-flange and straight tool shank designs. This MQL line includes all ShrinkerÃ-® nose types as well as the majority of collet style tool holders. Tom...
Read More »
Induction-Heating Machine suits shrink fit tool holders.
Tabletop G5 Shrink Fit induction-heating machine includes 3-station rotary tool holder that allows operators to heat and cool 3 tool holders simultaneously. Manual vertical column raises and lowers heating coil over tool holder nose, while 400 V, 3-phase heating system produces temperatures from 500 to 600-°F that expands tool holder bores in 6 sec. No shop air is required for operation....
Read More »
Tool Presetter shrink fits tool holders.
ShrinkSet(TM) combination vertical presetter and low/high-temperature, induction-heating machine allows users to shrink, preset, and inspect on one machine. It is available with manual operation, with scope or non-pc vision control, or as fully automatic with zero-positioning and vision capability. ShrinkSet works with HSK shrink-fit, coolant-thru holders, available in standard, extended, and...
Read More »
Tool Locking Fixture protects tool holder shanks.
Nylon sleeve in tool holder locking fixture protects ground steel taper shanks from being damaged when tools are mounted or removed. Locking fixtures can also be used to eliminate on-spindle tool changes that can cause damage to high-speed spindles. Fixtures are available in 30, 40, 45, and 50 CAT taper sizes, as well as all HSK A and C tapers. One set of sleeves is included with each fixture.
Read More »
Drill and Tap Holders have sealed ball-lock design.
Ball-lock drive technology provides fingertip control and tool changes as fast as 5 seconds. Six steel balls are mounted in spindle to retain and drive close-center drill holder. Balls fit into machined detents spaced 60Ã-
Read More »
Shrink-Fit Tool Holders include DIN designs.
HSK tool holders utilize Form A shanks that conform to DIN 69882 Standard. They are coolant-through holders with axial adjustment screws. Production balancing is standard and dynamic balancing is optional. Shrink-fit holders are offered in inch and metric bore sizes in USA and DIN designs. Standard, extended, and extra-extended length sizes in CAT 40 and 50 V-flange shanks are available. Tapers...
Read More »T.M. Smith Now Offers Complete New Line of Minimum Quantity Lubricant (MQL) Tool Holders
In response to industry's increased desire to take advantage of the benefits of tool holders that apply a minimum quantity lubricant (MQL) design, T.M. Smith Tool International has developed their own line, Fig. 1, of MQL tool holders for HSK, V-flange and straight tool shank designs. This MQL line includes all ShrinkerÃ-® nose types as well as the majority of collet style tool holders. Tom...
Read More »T.m. Smith Tool International Adds New Distributor in Western Canada
T.M. SMITH TOOL INTERNATIONAL ADDS NEW DISTRIBUTOR IN WESTERN CANADA Eagle Industrial Ltd. to provide sales and service for T.M. Smith tool holders, and related products. In an effort to provide sales and service coverage to the Provinces of Western Canada, T. M. Smith Tool International has added Eagle Industrial, Ltd., based in Winnipeg, Manitoba, to their international network of distributors...
Read More »David Smith Appointed Chief Operating Officer of T.M. Smith Tool International Corporation
The appointment of David Smith as chief operating officer, for T.M. Smith Tool International Corporation, is announced by Jerry Norton, T.M. Smith Tool International, president. T.M. Smith Tool International, 360 Hubbard Ave., Mt. Clemens, MI 48043. www.tmsmith.com The chief operating officer position is a new position created at T. M. Smith Tool. In this position, David Smith will be responsible...
Read More »
Induction-Heating Machine suits shrink fit tool holders.
Tabletop G5 Shrink Fit induction-heating machine includes 3-station rotary tool holder that allows operators to heat and cool 3 tool holders simultaneously. Manual vertical column raises and lowers heating coil over tool holder nose, while 400 V, 3-phase heating system produces temperatures from 500 to 600-°F that expands tool holder bores in 6 sec. No shop air is required for operation....
Read More »
Tool Presetter shrink fits tool holders.
ShrinkSet(TM) combination vertical presetter and low/high-temperature, induction-heating machine allows users to shrink, preset, and inspect on one machine. It is available with manual operation, with scope or non-pc vision control, or as fully automatic with zero-positioning and vision capability. ShrinkSet works with HSK shrink-fit, coolant-thru holders, available in standard, extended, and...
Read More »
Tool Locking Fixture protects tool holder shanks.
Nylon sleeve in tool holder locking fixture protects ground steel taper shanks from being damaged when tools are mounted or removed. Locking fixtures can also be used to eliminate on-spindle tool changes that can cause damage to high-speed spindles. Fixtures are available in 30, 40, 45, and 50 CAT taper sizes, as well as all HSK A and C tapers. One set of sleeves is included with each fixture.
Read More »
Drill and Tap Holders have sealed ball-lock design.
Ball-lock drive technology provides fingertip control and tool changes as fast as 5 seconds. Six steel balls are mounted in spindle to retain and drive close-center drill holder. Balls fit into machined detents spaced 60Ã-
Read More »
Shrink-Fit Tool Holders include DIN designs.
HSK tool holders utilize Form A shanks that conform to DIN 69882 Standard. They are coolant-through holders with axial adjustment screws. Production balancing is standard and dynamic balancing is optional. Shrink-fit holders are offered in inch and metric bore sizes in USA and DIN designs. Standard, extended, and extra-extended length sizes in CAT 40 and 50 V-flange shanks are available. Tapers...
Read More »