Romer, Inc.
Wixom, MI 48393
Share:
ROMER Inc. Rolls Out OMEGA Reverse Engineering Solution at WESTEC 2009
Entry-level OMEGA Redefines Multi-purpose 3D Measurement Wixom, MI - March 30, 2009 - ROMER Inc., a Hexagon Metrology company, announced today the rollout of the OMEGA portable measuring arm, their most economical tool for multi-purpose non-contact measurement to date. The product will be demonstrated in the Hexagon Booth 3600 at the WESTEC 2009 Exhibition, Los Angeles Convention Center, March 30...
Read More »CMM features portable design.
Available in 8, 10, and 12 ft configurations weighing 8-10 lb, STINGER IIi integrates Infinite Rotation of principle axes to enable inspection of hard-to-reach areas of part, and Zero-G(TM) Counterbalance system that offsets weight of arm and probe for ease of operation and one-handed execution. CMM comes with quick-change probes and NIST-traceable calibrated length standard for field...
Read More »
Inspection Software works with portable CMMs.
WindowsÃ-®-based PowerINSPECT v4.0 provides real-time inspection and reverse engineering of complex 3D parts and CAD-to-part comparison. It delivers on-screen feedback and color-coded graphics for immediate validation of each point. Software creates section cuts, surface offsets, and generates 3D curves for export. It includes HTML reporting feature, 3-tier password protection, and...
Read More »
Coordinate Measuring Machine has portable design.
INFINITE CMM articulating arm features infinite rotation, quick-change probes with automatic probe recognition, while integrated Wi-Fi 8.02.11b enables portability. Product also integrates low-profile, Zero-G counterbalance; USB video camera; and DOCS(TM) Lite software for basic prismatic measuring. Available in 6- and 7-axis configurations with measuring ranges of 4, 6, 8, 9, 10, and 12 ft, CMM...
Read More »
Inspection System is suited for use with CMMs.
TooLOK(TM) automates inspection of tools, fixtures, and parts to increase portable CMM throughput. Operator contacts 3 pre-qualified points on part, tool, or fixture with portable CMM probe to launch TooLOK. It instantly recognizes and aligns part, loads CAD file and inspection routine, and tells operator where to begin measuring. Software also enables users to pre-qualify parts, tools, or...
Read More »
Battery Pack powers portable CMMs.
Custom Nickel Metal Hydride battery provides 12 V output and includes short circuit protection for CMM arm. With life expectancy of 800-1000 charge-discharge cycles, unit powers CMM arm for 6-8 hrs under normal conditions. Product has one green and one red light that indicate level of charge. Red LED illuminates and stays lit once battery falls below minimum charge level. Physical dimensions are...
Read More »
Laser Inspection System provides -
Portable Laser Scanning Inspection System allows real-time inspection of parts against CAD models and point-cloud generation for reverse engineering applications. It includes choice of 6- or 7-axis portable coordinate measuring machine, laser scanner probe, and geometric and surface inspection software. System can collect and analyze over 23,000 points/sec. It avoids any contact with part that...
Read More »
Coordinate Measuring Machine has 15 ft articulating arm.
Designed for measuring, inspecting, and reverse engineering of large work-pieces, portable STINGER II(TM) will measure to Ã-
Read More »
Portable Inspection System uses laser scanner.
CimCore System allows real-time inspection of parts against CAD models. It includes choice of 6 or 7-axis 3000i portable coordinate measuring machine, laser scanner, and geometric and surface inspection software package that includes point-cloud functionality. System is capable of collecting and analyzing in excess of 20,000 points/sec. All data collected can be used for detailed off-line...
Read More »ROMER Inc. Rolls Out OMEGA Reverse Engineering Solution at WESTEC 2009
Entry-level OMEGA Redefines Multi-purpose 3D Measurement Wixom, MI - March 30, 2009 - ROMER Inc., a Hexagon Metrology company, announced today the rollout of the OMEGA portable measuring arm, their most economical tool for multi-purpose non-contact measurement to date. The product will be demonstrated in the Hexagon Booth 3600 at the WESTEC 2009 Exhibition, Los Angeles Convention Center, March 30...
Read More »CMM features portable design.
Available in 8, 10, and 12 ft configurations weighing 8-10 lb, STINGER IIi integrates Infinite Rotation of principle axes to enable inspection of hard-to-reach areas of part, and Zero-G(TM) Counterbalance system that offsets weight of arm and probe for ease of operation and one-handed execution. CMM comes with quick-change probes and NIST-traceable calibrated length standard for field...
Read More »
Inspection Software works with portable CMMs.
WindowsÃ-®-based PowerINSPECT v4.0 provides real-time inspection and reverse engineering of complex 3D parts and CAD-to-part comparison. It delivers on-screen feedback and color-coded graphics for immediate validation of each point. Software creates section cuts, surface offsets, and generates 3D curves for export. It includes HTML reporting feature, 3-tier password protection, and...
Read More »
Coordinate Measuring Machine has portable design.
INFINITE CMM articulating arm features infinite rotation, quick-change probes with automatic probe recognition, while integrated Wi-Fi 8.02.11b enables portability. Product also integrates low-profile, Zero-G counterbalance; USB video camera; and DOCS(TM) Lite software for basic prismatic measuring. Available in 6- and 7-axis configurations with measuring ranges of 4, 6, 8, 9, 10, and 12 ft, CMM...
Read More »
Inspection System is suited for use with CMMs.
TooLOK(TM) automates inspection of tools, fixtures, and parts to increase portable CMM throughput. Operator contacts 3 pre-qualified points on part, tool, or fixture with portable CMM probe to launch TooLOK. It instantly recognizes and aligns part, loads CAD file and inspection routine, and tells operator where to begin measuring. Software also enables users to pre-qualify parts, tools, or...
Read More »
Battery Pack powers portable CMMs.
Custom Nickel Metal Hydride battery provides 12 V output and includes short circuit protection for CMM arm. With life expectancy of 800-1000 charge-discharge cycles, unit powers CMM arm for 6-8 hrs under normal conditions. Product has one green and one red light that indicate level of charge. Red LED illuminates and stays lit once battery falls below minimum charge level. Physical dimensions are...
Read More »
Laser Inspection System provides -
Portable Laser Scanning Inspection System allows real-time inspection of parts against CAD models and point-cloud generation for reverse engineering applications. It includes choice of 6- or 7-axis portable coordinate measuring machine, laser scanner probe, and geometric and surface inspection software. System can collect and analyze over 23,000 points/sec. It avoids any contact with part that...
Read More »
Coordinate Measuring Machine has 15 ft articulating arm.
Designed for measuring, inspecting, and reverse engineering of large work-pieces, portable STINGER II(TM) will measure to Ã-
Read More »
Portable Inspection System uses laser scanner.
CimCore System allows real-time inspection of parts against CAD models. It includes choice of 6 or 7-axis 3000i portable coordinate measuring machine, laser scanner, and geometric and surface inspection software package that includes point-cloud functionality. System is capable of collecting and analyzing in excess of 20,000 points/sec. All data collected can be used for detailed off-line...
Read More »