Company News

Makino Inc

7680 Innovation Way, Mason, OH, 45040, USA

  • 513-573-7200

Latest New Product News from
Makino Inc

Material Handling & Storage

MMC2 Pallet Handling System is embedded with MAS-A5 control software.

April 1, 2017

Designed with new pallet-transfer interface on rail-guided vehicle, MMC2 Pallet Handling System can accommodate up to 15 machining centers and four work-setting stations into a single station. Offering easy access for operators to load and unload parts, each pallet can hold up to 200 pallet stockers which are stacked in one, two or three layers high. MMC2 system is compatible with a61nx-5E... Read More

Machinery & Machining Tools

A120nx Horizontal Machining Center features automatic pallet changer.

January 7, 2017

Designed with standard high torque 8,000-rpm spindle, A120nx Horizontal Machining Center can travel up to 1,900 mm, 1,600 mm and 1,700 mm in -X, -Y, and -Z axis respectively. Capableof housing tools up to 35.4 in. long, 14.0 in. diameter with up to 77 lbs weight, unit can switch between pallets in 38 sec. Combined with air-blow system and chip and management features, product delivers 46,500... Read More

Machinery & Machining Tools

Horizontal Machining Center produces large ferrous parts.

October 14, 2016

Designed for production of cast iron and light alloy parts, Model a71nx features 19.7 in. pallet and X, Y, Z axis travels of 31.5 in., 29.5 in, and 32.7 in., respectively. Machine's 60-tool capacity automatic tool changer has 6 reinforced pockets, yielding max tool length of 18.9/22.4 in. (Cat / HSK). Standard 10,000 rpm spindle offers 37 kW of power and 512 Nm of torque. By validating... Read More

Computer Hardware & Peripherals, Controls & Controllers, Test & Measuring Instruments

IIoT Interface accelerates Intelligent Factory demand response.

September 2, 2016

Supporting secure local network and private cloud-based data resources, ProNetConneX provides data and connectivity needed by Intelligent Factories. Solution connects, collects, and analyzes machine data within Intelligent Factory network to maximize productivity and efficiency. Offering secure connectivity to software management systems via MTConnect standard, this IIoT solution, fully... Read More

Machinery & Machining Tools

Vertical Machining Center suits small-component manufacturing.

August 29, 2016

Designed for high-volume, small-part manufacturing, Model L2 features 33.46 x 83.86 in. footprint and X, Y, Z travels of 15.74 x 11.81 x 11.81 in. Integrated A-axis rotary table and automatic pallet-change system accommodate workpieces up to 16.26 x 10.51 x 8.46 in. A-axis provides 6 integral ports for hydraulics and pneumatics to support fully automated fixtures. Equipped with 16,000 rpm,... Read More

Machinery & Machining Tools

Vertical Machining Center handles complex aluminum components.

August 19, 2016

Equipped with 340 x 300 mm worktable, 5-axis Model DA300 accommodates workpieces up to 450 mm in diameter, 400 mm tall, and weighing 250 kg. Machine provides X-, Y, Z-axis travels of 450, 620, and 500 mm, respectively, at feed rates up to 60,000 mm/min. Direct-drive, motor-driven A-axis table offers 150° of tilt capability at 100 rpm, while rotary C-axis has full 360° rotational positioning... Read More

Machinery & Machining Tools

Horizontal Machining Centers feature 14,000 rpm spindle.

July 29, 2016

Providing spindle torque up to 303 Nm, Model a51nx has 22 in. X-axis and Y- and Z-axes of 25.2 in., while Model a61nx features 28.7 in. X-axis, 25.6 in. Y-axis, and Z-axis of 31.5 in. Expanded Z-axis stroke enables max tool length of 16.9 in. and 20.1 in., respectively. Vision-type broken-tool sensor comes standard, supporting unattended operation by validating condition of cutting tools after... Read More

Machinery & Machining Tools, Services

Dual-Head Sinker EDM reduces tool build time for large molds.

February 2, 2016

Offering 122.0 x 70.9 x 39.4 in. work envelope and respective X, Y, and Z axis travels of 78.7, 59.1, and 23.6 in., EDNC21 handles payloads to 22,047 lb and electrode weights up to 662 lb (per head). Dual-head configuration enables concurrent processing of multiple fine details. Each gantry-style head, independently controlled/programmed via Hyper-i system, travels up to 78.7 in. Other... Read More

Machinery & Machining Tools

Sinker EDM Machines balance power, speed, and precision.

December 22, 2015

Equipped with Hyper and SuperSpark IV technologies, models EDNC10, EDNC15, and EDNC20 offer X/Y/Z travels from 39.4 x 23.6 x 19.7 in. to 78.7 x 27.6 x 23.6 in. and max work tank loads from 59.1 x 43.3 x 19.7 in. to 110.2 x 63.0 x 41.3 in. Max work loads are 6,614 lb (EDNC10) and 22,047 lb (EDNC15, EDNC20), and all machines feature 60 A (80 A peak) power supplies as standard. While EDNC10 and... Read More

Machinery & Machining Tools

Sinker EDMs handle large workpieces.

November 10, 2015

Equipped with Hyper-i control that uses pinch, swipe, and spread touch functions, Models EDNC6 and EDNC8 provide precise, high-speed cutting with optimized surface finish and minimized electrode wear. Machines offer X, Y, Z strokes of 25.6 x 17.7 x 13.8 in. and 31.5 x 19.7 x 15.7 in., respectively. Both feature 3-sided programmable drop tanks that provide ergonomic access. High-mass castings... Read More

Machinery & Machining Tools

Horizontal Machining Center produces die cast parts.

July 31, 2015

Featuring 400 mm pallet with workpiece capacity of 24.8 in. in diameter x 35.4 in. tall, Model a40 is suited for die cast parts commonly machined in automotive and consumer product industries. Machine offers X, Y, Z travels of 22.0 in., 25.2 in., and 25.2 in., respectively, with maximum payload of 880 lb. Equipped with 40-position automatic tool changer, Model a40 provides responsive CAT40... Read More

Machinery & Machining Tools

Five-Axis HMC targets manufacturers of small, complex parts.

September 11, 2014

Featuring rigid bed casting with 3-point leveling system, a51nx-5XU has tiered-column design. Linear X, Y, and Z axes are complemented by integral 5th-axis table with single casting design that houses and integrates B and C axes' twin direct-drive motors. Also included, work-pallet magazine simplifies pallet changes and offers standard storage capacity of 22 workpieces up to 300 mm dia x 300... Read More

Machinery & Machining Tools

Large Part HMC combines capacity, stability, productivity.

April 10, 2014

With automatic tool changer and respective full X-, Y-, and Z-axis travels of 35.4, 35.4, and 40.2 in., a81nx features 10,000 rpm spindle as standard that affords 305 Nm duty-rated torque and 45 kW extended-duty power (26 kW continuous). Optional 8,000 rpm spindle affords 553 Nm duty-rated torque and 37 kW continuous output. Built for rigidity and reliability, HMC also features GI servo control... Read More

Machinery & Machining Tools

Horizontal Machining Center suits large part applications.

January 14, 2014

Suitable for industrial component manufacturing and aerospace job-shop environments where machining of soft and hard metals is required, T1 5-Axis HMC can machine workpieces up to 3.2 ft² x 19.6–31.4 in. high in single 5-sided process. System provides X, Y, Z travels of 59.1, 51.2, 78.7 in. respectively. B-axis rotary table offers 360° rotational speed of 3,600 deg/min, which is supported... Read More

Machinery & Machining Tools

Vertical Machining Center handles workpieces up to 1,000 mm.

October 24, 2013

Designed to machine workpieces up to 1,200 kg in 5 axes, Model D800Z offers feedrates of 36,000 mm/min on X-, Y-, and Z-axes and 18,000 deg/min on B- and X-axes. System features rigid structure and integral, direct-drive motor on fourth and fifth axes. With Z shape design, tilt-trunnion table ensures that center of gravity of table and work are always captured within center of rotation of B-... Read More

Machinery & Machining Tools

Five-Axis HMC is suited for aerospace grinding applications.

August 27, 2012

Capable of grinding, drilling, boring, and milling, G7 i Grinder features NC-controlled intermittent dress and employs 12,000 rpm HSK-63A spindle. Respective X-, Y-, and Z-axis travels of 690, 650, and 730 mm accommodate workpieces with max diameter of 535 mm, while infinite C-axis rotation and max B-axis rotation of 270° offer full access 3D parts for single-setup production capabilities.... Read More

Machinery & Machining Tools, Transportation Industry Products

Five-Axis VMC brings speed, flexibility to aerospace machining.

June 26, 2012

Employing direct-drive rotary table and 15,000 rpm spindle with 120 Nm torque, D300 is designed for small, complex, 3D contouring of parts. Worktable has 300 mm dia work area and accommodates workpieces up to 450 x 270 mm and 120 kg. X-, Y- and Z-axis travels are 300, 500, and 350 mm, respectively, and feed rates reach 60,000 mm/min. Rotary table axes offer rotational motion of 240°... Read More

Machinery & Machining Tools

Micromachining Center utilizes 0.005 micron scale feedback.

July 23, 2010

Featuring 23.6 x 15.7 in. worktable with XYZ axis travels of 15.7 x 13.8 x 7.9 in., iQ300 Precision Micromachining Center utilizes 45,000 rpm HSK-E32 spindle equipped with core-cooling, under-race, and jacket spindle temperature control system, which virtually eliminates thermal growth, deflection, or vibration. Hybrid Automatic Tool Length Measurement System ensures microscope blending and... Read More

Machinery & Machining Tools

Five-Axis HMCs process titanium aerospace parts.

July 23, 2010

Equipped with ADVANTiGE(TM) technologies for titanium machining, T-Series includes Models T4 and T2 with XYZ axis travels of 4,200 x 2,000 x 1,000 mm and 2,000 x 2,000 x 1,800 mm, respectively. HSK-A125 spindle utilizes induction motor with twin inverter drive to produce speeds of 4,000 rpm with 740 lb-ft continuous torque and 1,100 lb-ft peak torque. To maximize part accessibility, horizontal... Read More

Machinery & Machining Tools

Precision Wire EDMs use oil-based dielectric fluid systems.

July 23, 2010

Suited for machining hardened materials and producing mirror-like surface finishes, UPV-3 and UPV-5 integrate fixed table design, PICO guide, and thermal control system that maintains constant dielectric and casting temperatures. Features create rigid machining platform capable of producing surface finishes to 0.08 µm Rz. Sizes of UPV-3 and -5 are 101.57 x 126.97 in. and 113.58 x 131.30 in.,... Read More

Other Company News from
Makino Inc