InterlinkBT is now Turck
Minneapolis, MN 55441
Share:
I/O System offers IP67 protection.
System BL67 allows up to 32 electronic modules and up to 256 digital or 64 analog I/O. Gateway coordinates I/O data exchange and generates diagnostic information for control platform. Modules are available in digital, analog, temperature, and RS232/485 with 2, 4, or 8 channels. Power distribution module supplies 24 Vdc to electronic modules and can create isolated groups of I/O. Base modules are...
Read More »
I/O Module connects pushbuttons to Devicenet(TM).
With IP67-rated, built-in DeviceNet eurofastÃ-® connector, FDN20 DeviceNet station fits into any standard pushbutton enclosure. Screw terminals are accessible from inside enclosure, and unit powers I/O from DeviceNet. Model FDN20-4S-4XSG-E has 4 dedicated inputs and 4 inputs or outputs and can handle following I/O mixes: 8 in, 7 in/1 out, 6 in/2 out, 5 in/3 out, or 4 in/4 out.
Read More »
Conduit Adapter can be used in harsh environments.
InterlinkBT(TM) attaches to standard conduit body for transition to minifastÃ-® or eurofastÃ-® connectors. Able to minimize point-to-point wiring in fieldbus systems, it eliminates need for troubleshooting. Adapter is efficient drop from trunk cable running in conduit; trunk cable is terminated into screw terminals of conduit adapter for connection to 1 or 2 devices. Product includes...
Read More »
Bus Station suits DeviceNet(TM) and PROFIBUS-®-DP networks.
AIM ST Module, busstopÃ-®, mounts directly on motor control enclosures to provide I/O, power, and network signals to inside and outside enclosure. Product offers up to 8 dry contactor inputs and outputs. From outside enclosure, signals are accessed via 5-Pin eurofastÃ-® or 4-Pin and 5-Pin minifastÃ-® connectors. Rear screw terminals provide clean way to get power and DeviceNet(TM)...
Read More »
Connectivity and DeviceNet(TM) Solution connects e-stop devices.
E-connect(TM) plug-and-work solution connects traditional e-stop devices and safety relay modules. Station operates in background to monitor where stop was initiated and annunciates system status. Able to be used on any DeviceNet system, product is available to connectorize 1, 2, and 8 e-stop devices. It isolates safety circuits form auxiliary power and DeviceNet communications circuits. E-stops...
Read More »
Industrial Ethernet Switch withstands harsh environments.
Fully-connectorized switch includes nine, 10/100 Mbps, 8-pin, eurofastÃ-® ports to segment network traffic, extend Ethernet connection distance, and convert data packets between transmission speeds. Compliant with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast Ethernet standards, product has NEMA 1, 3, 4, 12, 13, and IEC IP67 rated housing. Compact unit runs one horizontal cable to...
Read More »
Junction Tee connects to all Fieldbus devices.
Short Circuit Junction Tee, for FOUNDATION(TM) Fieldbus segments, features overmolded design for corrosion resistance. Circuit board is completely encapsulated in UV stable polyurethane. Available with stainless steel and nickel-plated brass connectors, Junction Tee provides complete IP67 protection, and short circuit protection to all 6 spurs. Current to each spur is limited to 55mA and provides...
Read More »
Ethernet Switch shares enterprise-wide information.
Industrial Ethernet(TM) Switch includes five 10/100 Mbps 8-pin eurofastÃ-® ports to segment network traffic, extend Ethernet connection distance, and convert data packets between different transmission speeds. Switch complies with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base/TX Fast Ethernet standards. Housing is rated NEMA 1, 3, 4, 12, 13, and IEC IP67 allowing switch to be installed in...
Read More »
Spanner Module offers visible rotary address switches.
FDN-DN1 Spanner module provides means to route data between 2 PLCs using DeviceNet(TM). By connecting DeviceNet networks directly, it eliminates needs for high-level control network pyramids. FDN-DN1 appears to each PLC as standard rack of I/O. Any DeviceNet scanner can send I/O data to Spanner module without additional software or complex configuration procedures. It is capable of transferring...
Read More »
I/O System offers IP67 protection.
System BL67 allows up to 32 electronic modules and up to 256 digital or 64 analog I/O. Gateway coordinates I/O data exchange and generates diagnostic information for control platform. Modules are available in digital, analog, temperature, and RS232/485 with 2, 4, or 8 channels. Power distribution module supplies 24 Vdc to electronic modules and can create isolated groups of I/O. Base modules are...
Read More »
I/O Module connects pushbuttons to Devicenet(TM).
With IP67-rated, built-in DeviceNet eurofastÃ-® connector, FDN20 DeviceNet station fits into any standard pushbutton enclosure. Screw terminals are accessible from inside enclosure, and unit powers I/O from DeviceNet. Model FDN20-4S-4XSG-E has 4 dedicated inputs and 4 inputs or outputs and can handle following I/O mixes: 8 in, 7 in/1 out, 6 in/2 out, 5 in/3 out, or 4 in/4 out.
Read More »
Conduit Adapter can be used in harsh environments.
InterlinkBT(TM) attaches to standard conduit body for transition to minifastÃ-® or eurofastÃ-® connectors. Able to minimize point-to-point wiring in fieldbus systems, it eliminates need for troubleshooting. Adapter is efficient drop from trunk cable running in conduit; trunk cable is terminated into screw terminals of conduit adapter for connection to 1 or 2 devices. Product includes...
Read More »
Bus Station suits DeviceNet(TM) and PROFIBUS-®-DP networks.
AIM ST Module, busstopÃ-®, mounts directly on motor control enclosures to provide I/O, power, and network signals to inside and outside enclosure. Product offers up to 8 dry contactor inputs and outputs. From outside enclosure, signals are accessed via 5-Pin eurofastÃ-® or 4-Pin and 5-Pin minifastÃ-® connectors. Rear screw terminals provide clean way to get power and DeviceNet(TM)...
Read More »
Connectivity and DeviceNet(TM) Solution connects e-stop devices.
E-connect(TM) plug-and-work solution connects traditional e-stop devices and safety relay modules. Station operates in background to monitor where stop was initiated and annunciates system status. Able to be used on any DeviceNet system, product is available to connectorize 1, 2, and 8 e-stop devices. It isolates safety circuits form auxiliary power and DeviceNet communications circuits. E-stops...
Read More »
Industrial Ethernet Switch withstands harsh environments.
Fully-connectorized switch includes nine, 10/100 Mbps, 8-pin, eurofastÃ-® ports to segment network traffic, extend Ethernet connection distance, and convert data packets between transmission speeds. Compliant with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast Ethernet standards, product has NEMA 1, 3, 4, 12, 13, and IEC IP67 rated housing. Compact unit runs one horizontal cable to...
Read More »
Junction Tee connects to all Fieldbus devices.
Short Circuit Junction Tee, for FOUNDATION(TM) Fieldbus segments, features overmolded design for corrosion resistance. Circuit board is completely encapsulated in UV stable polyurethane. Available with stainless steel and nickel-plated brass connectors, Junction Tee provides complete IP67 protection, and short circuit protection to all 6 spurs. Current to each spur is limited to 55mA and provides...
Read More »
Ethernet Switch shares enterprise-wide information.
Industrial Ethernet(TM) Switch includes five 10/100 Mbps 8-pin eurofastÃ-® ports to segment network traffic, extend Ethernet connection distance, and convert data packets between different transmission speeds. Switch complies with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base/TX Fast Ethernet standards. Housing is rated NEMA 1, 3, 4, 12, 13, and IEC IP67 allowing switch to be installed in...
Read More »
Spanner Module offers visible rotary address switches.
FDN-DN1 Spanner module provides means to route data between 2 PLCs using DeviceNet(TM). By connecting DeviceNet networks directly, it eliminates needs for high-level control network pyramids. FDN-DN1 appears to each PLC as standard rack of I/O. Any DeviceNet scanner can send I/O data to Spanner module without additional software or complex configuration procedures. It is capable of transferring...
Read More »