Company News

Pentek

One Park Way, Upper Saddle River, NJ, 07458, USA

  • 201-818-5900

Latest New Product News from
Pentek

Test & Measuring Instruments

Jade XMC Module offers frequency sampling of up to 8.1 GHz signals.

Aug 30, 2017

Designed using Xilinx Kintex UltraScale FPGA architecture, Model 71141 6.4 GHz Jade XMC Data Converter Module is embedded with two ADC12DJ3200 and DAC38RF82 RF sampling data converters with programmable DDCs and DUCs. Suitable in SATCOM, SAR, LIDAR distance measurement and SDR applications, unit comes with IP modules for A/D acquisition, D/A waveform generation, DDR4 SDRAM memories and a... Read More

Test & Measuring Instruments

Talon® Series Recorder offers recording rates up to 6.4 GB/sec.

Jul 18, 2017

Capable of recording sample rates ranging from 1.5 GHz to 3.0 GHz, Model RTR 2745 Talon® Series Recorder is designed with two 3 GHz 14-bit A/D converters and digital downconverters. Suitable for capturing IF outputs of RF downconverters with up to 600 MHz bandwidths, unit provides storage capacity of up to 61 TB using up to 32 hot-swappable solid-state drives. Recorder offers fixed decimation... Read More

Computer Hardware & Peripherals

Model 71851 Module is equipped with timing buses.

Mar 30, 2017

Featuring two 500 MHz, 12-bit A/Ds with multiband DDCs, one DUC and two 800 MHz 16-bit D/As, Model 71851 Module comes with front panel SSMC connectors. Integrating D/A waveform playback IP module for generating and storing waveforms, product is designed with 5 GB bank of DDR4 SDRAM, eight gigabit serial lanes and LVDS general purpose I/O lines. Module can be operated with carrier boards in... Read More

Test & Measuring Instruments

Model 71821 Data Converter works on Xilinx Kintex UltraScale FPGA.

Mar 02, 2017

Suitable for Digital RF memory applications, Model 71821 Data Converter is designed with ADS5485 200 MHz, 16-bit A/D converters, DAC5688 DUC upconverter and D/A stage. Featuring three A/D acquisition modules for easy capturing and moving of data, unit comes with DDR4 SDRAM, gigabit serial lanes and LVDS general purpose I/O lines. Enabling data multiplexing and channel selection functions,... Read More

Test & Measuring Instruments

Model 71841 XMC Modules offer eight additional gigabit serial lanes.

Dec 29, 2016

Suitable for extremely wideband signal applications, 71841 1-channel, 3.6 GHz 12-bit A/D or 2-channel, 1.8 GHz 12-bit A/D XMC converter module is designed to operate with wide range of carrier boards in PCIe, 3U & 6U VPX, AMC, and 3U & 6U Compact PCI form factors. Unit enables functions like data multiplexing, channel selection, data packing, triggering and memory control. With programmable... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals

Talon RTR 2623 Signal Scanning Recorder offers storage of 30 TB.

Oct 26, 2016

Allowing immediate access to recordings without need for any file format conversion, device offers intelligent scanning and searching from 20 MHz to 6 GHz at 30 Ghz/sec scan rate. Providing automatic tuning, detection and recording of signals, unit captures instantaneous RF bandwidths up to 40 MHz. Measuring 16.0"Wx6.9"Dx13.0"H and weighing 30 pounds, device is suitable for mobile military and... Read More

Test & Measuring Instruments

A/D and D/A Modules feature 3U VPX and PCIe form factors.

Aug 31, 2016

Consisting of FMC installed on either of 2 Flexor FMC carriers with Virtex-7 FPGAs, FlexorSet™ Model 5973-313 for 3U VPX and Model 7070-313 for PCIe platforms are multichannel, high-speed data converter sub-systems with highly programmable analog I/O signal interface and support for signal bandwidths up to 100 MHz. Flexor Model 3312 FMC features four 250 MHz, 16-bit A/Ds and two 800 MHz, 16-bit... Read More

Electrical Equipment & Systems

RF Tuner XMC Module enhances SATCOM, communications applications.

Jul 27, 2016

Designed for direct connection, Onyx® Model 71791 consists of L-Band RF tuner with two 500 MHz A/Ds based on high-density Xilinx Virtex-7 FPGA. Front panel SSMC connector accepts signals from 925–2175 MHz, and RF tuner with programmable LNA converts L-Band signals to IF or baseband using broadband I/Q analog downconverter followed by 123 MHz low pass anti-aliasing filters. Able to capture... Read More

Test & Measuring Instruments

Signal Scanning Recorder provides up to 192 TB of storage.

Jun 29, 2016

Available in 3U–9U 19 in. rackmount server chassis with hot-swappable HDDs, Talon® RTS 2620 RF Sentinel™ Intelligent Signal Scanning Recorder provides automated signal monitoring and detection. Unit can scan and search from 2 MHz to 6 GHz at 30 GHz/sec scan rate, and capture instantaneous RF signal bandwidths up to 40 MHz. Serving as data acquisition engine, Model 78621 Cobalt®... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Software Radio Modules leverage TI ADC32RF45 ADC.

May 20, 2016

Featuring Texas Instruments (TI) ADC32RF45 dual 14-bit, 3 GSPS ADC converter, FlexorSet® 5973-320 for 3U VPX and FlexorSet 7070-320 for PCIe consist of Flexor Model 3320 configurable 2-channel A/D and 2-channel D/A FMC installed on either of 2 carriers. FPGA IP, contained on carriers for A/D acquisition and D/A waveform generation, is optimized to match features of FMC, while software... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

XMC FPGA Module includes VITA 49 protocol engine.

Jan 22, 2016

Based on Xilinx Virtex-6 FPGA, Cobalt® Model 71664 includes IP engine for VITA 49 Radio Transport protocol. Front end A/D converter stage accepts 4 analog HF or IF inputs on front panel SSMC connectors, with each transformer-coupled to TI ADS5485 200 MHz, 16-bit A/D converters. Designed for both rugged and lab environments, Model 71664 comes preconfigured with suite of built-in functions for... Read More

Test & Measuring Instruments

Rackmount Recorder provides 16 analog input channels.

Dec 03, 2015

Supplied in 4U rackmount chassis optimized for rugged environments, Talon® Model RTR 2750 provides phase-coherent, synchronous recording of 16 independent input channels at sustained aggregate data rate up to 8 GBps. Each input channel includes 250 MHz 16-bit A/D and FPGA-based digital downconverter with independent tuning and programmable decimation from 2–65,536 to capture RF signal... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

A/D and D/A Converters utilize Virtex-7 FPGAs.

Oct 30, 2015

Suited for radar, communications, and DAQ applications, FlexorSet Model 5973-324 for 3U VPX and Model 7070-324 for PCIe consist of Flexor Model 3324 4-channel A/D and 4-channel D/A FMC installed on either of 2 carriers. Carriers contain Pentek FPGA intellectual property for A/D acquisition and D/A waveform playback, which is matched to four 500 MHz, 16-bit A/Ds and four 1.5 GHz, 16-bit D/As... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

FMC Subsystems offer optical interface solutions.

Sep 30, 2015

Combining performance of Virtex-7 and optical interconnects with flexibility of multichannel FMC data converter, FlexorSet™ Series creates complete radar and software radio sub-system. FlexorSet Model 5973-312 for 3U VPX and Model 7070-312 for PCIe, utilize Flexor Model 3312 4-Channel A/D and D/A FMC installed on either of 2 Flexor FMC carriers. Both are pre-configured with IP, providing... Read More

Test & Measuring Instruments

RF/IF Signal Recorder has rugged and portable design.

May 04, 2015

Sustaining recording rates to 3.2 Gbps, RTR 2726A is used for wideband signal recording/playback in signal intelligence and RF testing. Up to 8 recording and playback channels can be configured in appropriate combination for specific applications, and optional DC power supply enables use in ground or airborne vehicles without inverters. Ruggedized 16.0 x 6.9 x 13.0 in. housing weighs <30 lb, and... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Adaptive IF Relay XMC aids commercial, military communications.

Apr 06, 2015

Accepting 2 IF (Intermediate Frequency) analog input channels, Cobalt® Model 71624 modifies up to 34 signals, and then delivers them to 2 analog IF outputs. Any signal within each IF band can be independently enabled/disabled and changed in both frequency and amplitude. XMC features Virtex-6 FPGA and 34 independently tunable DDCs and supports such functions as signal drop/add/replace,... Read More

Test & Measuring Instruments

Portable Serial FPDP Recorder suits field or laboratory use.

Jan 22, 2015

Capturing up to 8 Serial FPDP data streams in real-time to SSDs, Talon® RTR 2736A complies with VITA 17.1 specification and supports sFPDP baud rates up to 4.25 Gbaud. Unit includes PCIe Gen 3 SATA III RAID controller capable of streaming contiguous data to disk in real-time at aggregate rates up to 3.2 Gbps. Hot-swappable SSD array is available in 1.9–15.3 TB configurations and supports... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Pre-Configured 3U VPX System speeds application development.

Aug 27, 2014

Configured for Windows 7 Professional or Linux OS, SPARK™ Model 8267 speeds application development for Pentek Flexor® FMC, Cobalt® Virtex-6, and Onyx® Virtex-7 FPGA 3U VPX software radio and data acquisition I/O boards. Rackmount workstation is populated with VPX SBC with Intel Core i7® processor and DDR3 SDRAM. All analog and timing cables are installed and tested, providing SMA... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Portable RF/IF Signal Recorder captures 3.6 GS/sec.

Jul 30, 2014

Equipped with 3.6 GHz 12-bit ADC, Talon® RTR 2729A can stream contiguous data to disk in real-time at 4.8 GBps when coupled with PCIe Gen. 3 SATA III RAID controller. User-programmable DDC allows system to capture tunable IF signals with bandwidths up to 360 MHz continuously for over 4 hr. Supplied in 16.0 x 6.9 x 13.0 in. housing, recorder uses Pentek Virtex-7 based Onyx software radio board... Read More

Communication Systems & Equipment, Test & Measuring Instruments

GSM Monitoring Receiver suits government and military systems.

May 15, 2014

Using optimized IP core for Xilinx Virtex-6 FPGA, Cobalt® Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands. Unit accepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by 4 A/D... Read More

Other Company News from
Pentek