Weld Guns

MIG Gun combines ergonomics and operational flexibility.
Weld Guns

MIG Gun combines ergonomics and operational flexibility.

Ergonomically designed for comfort during use, Spray Master(TM) features duty cycle of 80% with Argon mixed gases and rotatable conductor tube with articulating head that helps lock gun angle for certain positions. Extended trigger life, with its blade-style design, creates electrical contact by sliding over each other in self-cleaning action to avoid arcing and bonding of contact surfaces. Gun...

Read More »
Weld Guns

HBS Introduces 2 New Inverter Stud Welders

February 1, 2009 HBS has increased their range of Inverter Technology stud welding equipment, adding a 2 gun and a 4 gun capacity units. The product line has the most complete range of cost effective Inverter welders available today. The line ranges from a 1000 amp to 2600 amp, systems available in 480/460V and 40 to 120Kw configurations. The largest unit weighs less than 300 lbs, making the...

Read More »
MIG Guns are built for extended use.
Weld Guns

MIG Guns are built for extended use.

Built-to-order, semi-automatic TOUGH GUN(TM) MIG Guns come in air- and water-cooled models with respective capacities of 350-650 A and 400-600 A. While air-cooled versions include aircraft-grade aluminum armored gooseneck, water-cooled guns feature stainless steel gooseneck. Both types integrate cable strain relief on both ends, TOUGH LOCK(TM) Contact Tips for extended wear life, and QUICK...

Read More »
Ultrasonic Welding System has digital time/energy controls.
Weld Guns

Ultrasonic Welding System has digital time/energy controls.

Available in 20 and 40 kHz versions, portable ultrasonic plastics welding systems can be set to weld in digital time (0.1-9.9 sec) and/or constant energy (0-999,999 J) modes as well as continuous duty mode for optimal control. Each 500 W, MPU-controlled hand gun, designed for welding, staking, inserting, and spot welding applications, also features autotune circuitry, frequency display, digital...

Read More »
Cloos Twin Wire Robotic Guns - ATTC Now Manufactures Replacement Parts
Weld Guns

Cloos Twin Wire Robotic Guns - ATTC Now Manufactures Replacement Parts

The American Torch Tip Company has started making replacement parts for use on the Cloos Tandem and Twin Wire robotic torch Systems. The company now offers an expanded consumables line which includes parts for the ZMW600,ZMW610 and MRW500 robotic torches The emphasis has been on developing a line of domestic products with higher quality and extremely close tolerances to insure good weld...

Read More »
Gooseneck System minimizes MIG gun downtime.
Weld Guns

Gooseneck System minimizes MIG gun downtime.

Designed for curved handle TOUGH GUN(TM) MIG guns, QUICK LOAD(TM) Gooseneck System enables welding operators to change gooseneck combinations, providing exact angle for specific application. Quick-release feature requires only opening and closing of latch to switch out different gooseneck styles, and allows gooseneck to be rotated 360° to reach awkward joints or weld in confined areas....

Read More »
Weld Guns

MIG Guns are designed for high deposition welding.

Available in 300-600 A models, HD Q and S Series MIG guns feature one-piece straight handle with rubber grip for maneuverability and armor-protected locking trigger with optional dual-schedule switch to provide toughness and reduce operator fatigue. Stay-Tite technology incorporates long-lasting compression fittings and large, tapered neck-to-handle connections to ensure that gun runs cool and...

Read More »
Tregaskiss to Feature Latest Welding Innovations at Weld Expo Canada 2008
Weld Guns

Tregaskiss to Feature Latest Welding Innovations at Weld Expo Canada 2008

WINDSOR, Ontario. July 1, 2008-Tregaskiss will attend the Weld Expo Canada in Mississauga, Ontario, September 23 to 25. Products to be displayed at Booth #2600 include the TOUGH GUN(TM) ThruArm(TM) Series with LSR (Low-Stress Robotic) Unicable technology and the new QUICK LOAD(TM) Gooseneck System for TOUGH GUN MIG Guns. At 100% Duty Cycle, the TOUGH GUN ThruArm Series robotic gun with LSR...

Read More »
Weld Guns

Lincoln Electric's Innershield Welding Guns

FLUX-CORED, SELF-SHIELDED GUNS IDEAL FOR LARGE FABRICATION AND SMALL REPAIRS o Rugged and reliable performance for large fabrication o Lightweight and easy to handle o Added maneuverability for difficult to reach welds o Adjustable grip angle Cleveland- The Lincoln Electric Company's Innershield® semiautomatic flux-cored, self-shielded guns are rugged and reliable, ideal for bridge, ship,...

Read More »
Weld Guns

Bernard to Showcase New Flux-Cored Welding Products at 2008 CONEXPO-CON/AGG Show

o Gasless Centerfire components allow Q-Gun to be used for MIG or flux-cored o Heavy-Duty Centerfire consumables withstand high amperage MIG welding o Dura-Flux gun sets the standard in comfort and durability in flux-cored welding BEECHER, Ill. December 3, 2007- With a focus on toughness, comfort and durability, Bernard® will showcase the new Dura-Flux(TM) gun as well as the new heavy-duty...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers