Precision Coaxial Termination covers frequency from DC-67 GHz.
Featuring passivated stainless steel body with center contact made of gold-plated and heat-treated beryllium-copper material, Model T5M offers max VSWR of 1.2 from DC-40 GHz and 1.43 from 40-67 GHz. Termination has 2.4 mm male connector and measures 0.84 x 0.36 in. in diameter. Unit is useful when terminating unused ports, on isolated ports of hybrids and combiners, and to protect devices from...
Read More »
High Power Loads offer 16-bit resolution measurements.
Featuring microprocessor with 16-bit DAC control to simulate dynamic loading applications, HP Series delivers measurements every 30 -µs. Devices' 4K pattern depth allows for programming of complex load waveforms and dynamic sweeping of load profile. Via single connection, 2,500 W units provide dual range 16-bit resolution measurements of voltage, current, resistance, and power. Loads are rated...
Read More »
Chip Termination supports DC to 40 GHz operation.
Housed in 0505 size chip, 25 W Model NDX-0505SG features Aluminum Nitride substrate material, which offers environmentally safe alternative to BeO and demonstrates return loss better than 20 dB over DC to 40 GHz. Terminal finishes can be RoHS-compliant Platinum Silver or Sn62 solder fused over Platinum Silver. Typical applications include handheld radio terminals, RF test and measurement...
Read More »
Waveguide Adapters and Terminations cover 5-40 GHz range.
Available in rectangular waveguide sizes from WR137 to WR28, Waveguide-to-Coax Adapters and Terminations provide full-band impedance matching with minimal insertion loss. VSWR for adapters and terminations is better than 1.20 and 1.02, respectively. Power handling capabilities range from 0.5 W for WR28 over frequency range of 26.4-40.1 GHz to 2.0 W for WR137 over 5.38-8.17 GHz. Made of precision...
Read More »
Sales and Marketing in the Manufacturing Industry and How CRM Can Help
To learn more about the importance of CRM and how it can specifically address your company's needs, download now.
Read More »Cold Shrink Short Terminations suit space-restricted areas.
Compliant with NEC Code requirements, 3M Cold Shrink Silicone Rubber Short Terminations QT-III 762X-T-95 Series enables accelerated installation in limited-space enclosures. These 8.5 in. terminations provide reliable performance and can help installation projects stay on schedule by reducing need for wiring design modifications. Meeting/exceeding IEEE 48 standards, products offer conductor range...
Read More »
Wire and Cable Terminations are RoHS-compliant.
Free of lead and cadmium, RAYCHEM SolderSleeve devices provide means to splice and terminate wire and cable. Products, comprised of engineered solder preforms, flux, and cross-linked heat shrinkable sleeve, provide completely soldered, strain-relieved, and encapsulated termination. One-step process facilitates installation. Devices are suited for use in coaxial, wire to wire termination and...
Read More »
Termination features welded silver ribbon lead.
Measuring 250 x .250 x .040 in., Aluminum Nitride 50 Ohm Termination, Model AlN2291 features return loss of 25 db on input and output. It provides CW power handling to 150 W, operating to frequency of 4 GHz. Available in lead-free metals, termination is suited for high power RF/microwave amplifier and transmitter applications.
Read More »
SCSI Bus Terminators meet SCSI-1 to SPI-4 standards.
Available in 9-, 14-, and 15-line models, multi-mode Series SiP56xx is built on high-voltage, 0.8 micron BiCMOS process. Each output channel provides termination for one SCSI data signal, parity signal, or control signal. Termination provides impedance matching of SCSI bus to minimize signal reflections from end of bus, as well as required SCSI bus biasing for S/E or LVD operation. Units sense...
Read More »Terminators offer internal and external configurations.
SCSI Series Terminators with internal configuration utilize SCSI connectors. Ultra 320 units are available as both IDC type and socket type, both utilizing TI/Unitrode chipset. External LVD/SE terminators are Ultra 320 SCSI compliant, and like internal terminators, support active negation. Housed in overmold shell with 2-56 threaded slotted thumbscrews, they include full EMI shielding and LED...
Read More »
Terminator and Cable System is suited for U320 SCSI systems.
LVD Terminator and Internal Cable System matches impedances of bus to help insure that bus terminates in stable environment. Terminator supports LVD SCSI drivers. Active chips on terminator pcb detect type of SCSI drivers present on bus via voltage on DIFFENS SCSI control line. Circuitry includes 2.7-5.25 V operation, differential failsafe bias, built-in SPI-3 Mode ChangeFilter/Delay, and tightly...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
