Stirrers

Automated Powder Feeding and High-Speed Mixing Skid System
Miscellaneous Controls

Automated Powder Feeding and High-Speed Mixing Skid System

Hauppauge, NY – Designed for automatic ingredient additions and high-speed mixing, the pictured Solids/Liquid Injection Manifold (SLIM) Mixer is piped to a 400-gallon jacketed tank and mounted on a compact skid. Flow meters, load cells, solenoid valves, level sensors and thermocouples are all integrated into a PLC Recipe Control Panel. Each ingredient addition and each step in the mix, drain...

Read More »
Planetary Disperser features 10 gallon capacity.
Impeller / Propeller / Turbine - Agitators / Mixers

Planetary Disperser features 10 gallon capacity.

Combining dual-bladed disperser with helical planetary stirrer, PowerMix Model PDM-10 disperses powders, fibers, or other solids into liquid. As material thickens, combined mixing power of agitators can continue to apply high levels of shear even after product has reached viscous, non-flowing state. Vacuum-rated mixer features portable mix vessel, air/oil hydraulic lift to raise/lower agitators,...

Read More »
Hybrid Planetary Mixers handle high-viscosity applications.
Impeller / Propeller / Turbine - Agitators / Mixers

Hybrid Planetary Mixers handle high-viscosity applications.

Operating over viscosity range up to several million centipoise, Planetary Dual Dispersers are comprised of 4 agitators - 2 planetary stirrers and 2 high-speed dispersers - all rotating on their own axes while orbiting mix vessel on common axis. Saw-tooth blades on each shaft provide intensive shearing action for rapid dispersion and particle size reduction. Planetary stirrers continually...

Read More »
Hot Plate and Stirrer feature 5 or 9 positions.
Other Process Heaters

Hot Plate and Stirrer feature 5 or 9 positions.

With large 12 in. square ceramic heater tops offering temperature range to 400°C, Model ST15/HS15 can stir five 800 ml beakers, while ST19/HS19 units can stir nine 500 ml beakers of aqueous solutions. Stirring range is from 100-1,500 rpm. All controls are mounted in front of heater surface to protect against accidental burns and are designed to keep spills out of chassis. Units are...

Read More »
Hot Plates and Stirring Hot Plates handle large samples.
Other Process Heaters

Hot Plates and Stirring Hot Plates handle large samples.

Available in 100, 115, and 230 Vac, 50/60 Hz versions, EchoTherm(TM) HP61 and HS61 feature 10 program memory with 10 steps per program, temperature ramping, RS232 I/O port, membrane keyboard, and full-function LCD where all parameters are continuously visible. Heater tops, offered in ceramic or milled-flat cast aluminum, are 12 x 12 in. with 1,400 W heaters. Temperatures can be set to 450°C...

Read More »
Digital Stirring Hot Plate provides 5 stirring positions.
Other Process Heaters

Digital Stirring Hot Plate provides 5 stirring positions.

Suited for laboratories where reproducible, hands-off sample preparation and experimentation are required, EchoTherm(TM) Model HS65 features 12 x 12 in. solid ceramic glass heater plates that can be heated from ambient to 400°C. Stirring speed is 100-1,500 rpm and controlled by optical coupler to 10 rpm. With Model HS65, programming is done through front panel membrane switch and...

Read More »
Other Process Heaters

Hot Plates and Stirrers offer up to 9 positions.

Featuring 12 in. square ceramic heater tops, Analog Stirring Hot Plates have temperature range up to 450°C. Five-position stirring unit can stir 5-800 ml beakers, while 9-position unit can stir 9-500 ml beakers of aqueous solutions with stirring range from 100-1,500 rpm. Available in 100 Vac/50 Hz, 115 Vac/60 Hz, 220 Vac/60 Hz, and 230 Vac/50 Hz, hot plates support more than 50 lb on plate...

Read More »
Magnetic Stirring Bar is optimized for wear resistance.
Stirrers

Magnetic Stirring Bar is optimized for wear resistance.

Used to stir and mix everything from solutions in cuvette to 55 gal drums, Spinfinity(TM) is manufactured under protected processes that encapsulate magnet in plastic material. Covering has zero porosity and addresses conditions that cause material breakdown. While octagon shape optimizes surface area, interrupted profile of built-in pivot ring minimizes friction and chattering. Product comes in...

Read More »
Hot Plate offers individual stirring control for 5 vessels.
Other Process Heaters

Hot Plate offers individual stirring control for 5 vessels.

Featuring 12 in. square ceramic heater top with temperature range to 450°C, Model HS15 can heat and stir five 800 mL beakers at stirring range of 100-1,500 rpm. Unit measures 12.5 x 19 x 5.25 in. and can support over 50 lb on plate surface. Chassis design keeps spills out of interior of unit, and all controls are mounted well in front of heater surface to protect against accidental burns....

Read More »
Digital Magnetic Stirrers offer 30-2,000 rpm speed range.
Stirrers

Digital Magnetic Stirrers offer 30-2,000 rpm speed range.

Supplied with 2 non-slip silicon plate pads, Digital Magnetic Stirrers are available in 2 models, one with 6.25 in. plate and 4 liter load capacity and another with 8.25 in. plate and 5 liter load capacity. Units feature chemical resistant polypropylene bodies, BLDC motors, and VFD readout for monitoring of stirring speed.

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics