Optical Couplers, Transceivers meet telecom/datacom requirements.

Intended for telecom, datacom, and military applications, multi-mode and single-mode optical tap, splitter, and star couplers feature simplistic connector terminations and come in ruggedized housings that isolate fused fiber area. Miniature 2 x 12 channel (TX=RX) single on-board transceiver system supports next generation Infiniband and Ethernet standards as well as other emerging intra box...

Read More »
DSL Splitter offers lightning and power fault protection.

DSL Splitter offers lightning and power fault protection.

Designed with 6 pins instead of 4 pins, B8841PNL Central Office VDSL2 Splitter Module enables protective device, such as sidactor, to be added on board underneath module and eliminates need for separate protection rack card. Pin location allows fast-acting secondary over-voltage protector to be used to protect filter from surge effects while maintaining VDSL2 performance. Splitter meets...

Read More »

Fiber Coupler/Splitters feature fused biconical tapered process.

Built on fused biconical tapered (FBT) process and proprietary packaging platforms, 1X3 polarization maintaining (PM) truly-fused fiber coupler/splitters offer high extinction ratio with polarization launch into single- or dual-axis (slow axis and fast axis). Tests have shown PER of greater than 18 dB and uniform split ratios. Harsh-environment resistant products- are suited for use in fiber...

Read More »
AS-Interface Splitters feature stainless steel coupling nuts.

AS-Interface Splitters feature stainless steel coupling nuts.

Featuring one-piece housing with IP67/IP68/IP69K ratings, Models VAZ-2T1-FK-G10-V1-V4A and VAZ-T1-G10-1M-PUR-V1-GV4A mount in tight spaces, are immune to vibration, and feature gold-plated and machined contacts. Housing design has flat-cover top and smooth-surface bottom that resists collecting food particles and facilitates cleaning during high-pressure washdowns in food and beverage...

Read More »
Unequal Power Splitters offer range of signal-split ratios.

Unequal Power Splitters offer range of signal-split ratios.

Unequal Power Splitters, or Tappers, unevenly split high power signals for in-building Distributed Antenna Systems (DAS) applications- and designs. There are 6 models, which- offer- 2:1, 3:1, 4:1, 6:1, 8:1, or 10:1 signal-split ratio over 698–2,700 MHz (Cellular, PCS, AWS, and BRS/EBS frequencies) range and feature PIM ratings of- better than -150 dBc. With minimal coupling variation over...

Read More »
AS-Interface Splitters help connect more devices in less space.

AS-Interface Splitters help connect more devices in less space.

Available in flat cable or M12 male connector versions, G11 series comprises passive splitters that are sealed to keep out contaminants as well as- ECOLAB-certified and IP67-rated for operation in wet environments. In addition to AS-Interface,- these products- suit power and network distribution requirements. With yellow flat cable, AS-Interface supplies power to sensors and actuators and lets...

Read More »
Beam Splitters and Combiners suit CO2 lasers up to 100 W.

Beam Splitters and Combiners suit CO2 lasers up to 100 W.

Designed for engraving, marking, and scribing lasers, CO2 Laser Beam Splitters facilitate power measurements and other dual uses by reflecting percentage of beam. Combining 10.6 -µm and 0.633 -µm wavelengths, Laser Beam Combiners permit alignment and focusing by providing visual light beam. Made from ZnSe with various coatings to achieve polarization states, splitters permit up to 50%...

Read More »

HDMI Splitter/Extender supports up to 8 displays and speakers.

Supporting HDTV resolutions to 1080p and computer resolutions to 1920- x 1080 and 1920 x 1200, VOPEX-® HDMI HDBase-T Splitter/Extender- simultaneously distributes uncompressed HD, multi-channel audio, Ethernet, and IR from 1 video source to up to 8 displays and speakers, each located up to 328 ft away via CAT5e/6 cable. System consists of 2 components:- HDMI HDBase-T broadcast unit, which...

Read More »
TURCK Announces Minifast Splitters and Tees That Provide Voltage Monitoring for DeviceNet Applications

TURCK Announces Minifast Splitters and Tees That Provide Voltage Monitoring for DeviceNet Applications

Minneapolis, MN -- TURCK introduces new 7/8-16UN minifast tees, splitters and in-line diagnostic devices, designed for use in DeviceNet applications, including CAN networks and mobile equipment. Models are available in a standard option for classic DeviceNet use and a voltage monitoring version that contains an integrated circuit board to serve as a diagnostic tool. Voltage monitoring tees and...

Read More »

All Topics