Ruggedized Splitter offers Outside Plant fiber connectivity.

APACN ruggedized splitter withstands temperatures from -55 to +85°C and provides fiber protection, management, and maintenance in FTTx deployments. One-touch turn-up design allows output legs to be handled only during customer turn-up, reducing human handling. As component of Fiber Scalability Center Outside Plant cabinets, splitter supports one 1 x 32, two 1 x 16, or four 1 x 8 configurations...

Read More »
PoE Splitter delivers up to 14 W of power.

PoE Splitter delivers up to 14 W of power.

Suited for wireless network and IP applications, Series PSD14 DC-DC Power-over-Ethernet Splitter mounts next to Ethernet device, and is fully compliant with IEEE 802.3af standards. Input voltage is 36-56 Vdc and output voltage is 12, 5, or 3.3 V, depending upon model. Measuring 3.7 x 2.0 x 1.2 in., device is available in non-vented case with 10Base-T, 100Base-T, and 1000Base-T data rates. It is...

Read More »

Ceramic Substrates reduce in-circuit transmission line losses.

Available in 0.010, 0.015, and 0.025 in. thicknesses, polished ceramic substrates provide approximately 0.2 dB improvement in line loss per inch on 0.025 in. thick alumina transmission line. Allowing for smaller circuit and element geometries, as well as reduced circuit size, substrates are suitable for use in routers and switches, servers, computers, wireless applications, RF and microwave...

Read More »
Roll Splitters eliminate manual roll removal.

Roll Splitters eliminate manual roll removal.

Model 30 and Model 72 automatically remove defective and/or out-of-spec plastic stretch film, paper, foil, and paper waste from cardboard cores in as little as 8 sec. Designed to replace manual methods for roll removal, machines feature safety gate and mandrel that must be closed and secured to permit operation as well as see-through safety cage. Model 30 and Model 72 handle max roll diameters of...

Read More »

Port Splitter expands communications capabilities.

Used with existing controllers, RS-232/DF1 port splitter connects to DF1 full-duplex port to allow simultaneous communication with local network and operator interface. Control users with one DF1 full-duplex port can use splitter to create one full-­function port for 2-way communication between controller and local network. Primarily designed to run programming terminal or HMI, second port is...

Read More »

Variable Attenuator and Beam Splitter mounts on CCD camera.

Designed for BeamStar FX Beam Profiler CCD cameras, variable attenuator option provides control over 4 orders of magnitude between 350-1100 nm wavelengths and suits pulsed lasers. BeamStar FX series beam splitters include UV grade fused silica wedge beam splitter that fits onto camera and another splitter that stands alone on its own adjustable stand. Each splitter reduces laser beam intensity by...

Read More »
Isolators protect process equipment and power input devices.

Isolators protect process equipment and power input devices.

AC/DC-powered 630T Series isolators and signal splitters feature internal excitation supply to drive up to two 2-wire transmitters or other input loop devices. Multi-channel isolators provide space-efficient solution to eliminate ground loops, filter signal noise, and block high voltage surges. Measuring 1 in. wide, single/dual-channel isolators receive 4-20 mA inputs and provide fully isolated...

Read More »
Power Splitter offers 3 dB split at any of 3 ports.

Power Splitter offers 3 dB split at any of 3 ports.

Mounted on alumina substrate, Model IMX 2228 features attenuation range of 6 dB ± 0.5 dB and frequency range of 0-7 GHz. Input power is 1 W and load power rating is 0.5 W with base plate temperature of 100°C or less. Measuring 0.100 x 0.100 x 0.015 in., surface mountable unit offers input VSWR of 1.3:1 or better.

Read More »
Video Splitter is suited for industrial environments.

Video Splitter is suited for industrial environments.

Based on Camera Link interface standard, CLV-401 Camera Link Video Splitter interfaces one Camera Link camera to 2 frame grabbers using Camera Link cables. Arrangement enables addition of second frame grabber for functions such as camera setup, secondary/parallel processing, and monitoring. First frame grabber acts as master, providing control and communications to camera, while secondary frame...

Read More »
Line Splitter allows testing of loads up to 1,800 W.

Line Splitter allows testing of loads up to 1,800 W.

Meterman® ELS2 AC Line Splitter works with any ac current clamp or clamp meter to measure residential current without splitting ac line cords. Rated for 120 V at 15 A, unit provides 10 times current magnifying loop for accurately measuring low current. Built-in jacks are provided for voltage sag testing. Splitter includes nylon carrying case and is useful to residential, commercial, and...

Read More »

All Topics