Splicers

Splicers

Fusion Splicer features 8-sec fusion splice time.

Maintaining continuous optical waveguide by melting 2 fibers together, GAO730 Fiber Optic Fusion Splicer automatically adjusts to environmental conditions by using temperature, humidity, and pressure sensors to provide constant feedback control to regulate fusion arc temperature. Average fusion splice loss is 0.02 dB for singlemode fiber and 0.01 dB for multimode fiber. Unit also splices...

Read More »
Electrical Enclosures

Splice Enclosure Solves Tactical Field Cable Repair Problem

Cranbury, NJ, The Norland Flexible Splice Enclosure (P/N 20960M) for fiber optic tactical field cable is a novel solution for protecting fiber optic splices and restoring full cable strength to the repaired section of a cable. In the past, ease of assembly and the bulkiness of the enclosure when the cable is wound on a storage reel had been a continuing problem for the military. The new enclosure...

Read More »
Splicers

Fusion Splicer targets LAN applications.

Designed with maintenance-free electrodes, OptiSplice® M90e uses LID-SYSTEM(TM) Unit to optimize core alignment in X, Y, and Z axes. Auto fusion time control monitors power level through splice and completes fusing process when splice loss is at minimum. Based on 3-dimensional cameras, Core Detection System allows for 13 sec single-mode core-alignment on 250 or 900 micron-coated fibers,...

Read More »
Splicers

Splicer handles 60 in. dia rolls.

Developed for 80-page presses with web width up to 2,400 mm, DLC 6000 Match-Speed Splicer can handle 60 in. diameter rolls at max production speed of 3,540 fpm. Rolls load into paster by automatic roll-handling systems that have adjustable automation level, allowing roll changing without operator. Additional features include split-arms that minimize changeover time when changing web width,...

Read More »
Splicers

Match-Speed Splicers suit limited space applications.

With splice efficiency rating over 99.5%, MP Series carries newspaper rolls from 40-67 in. wide with roll diameter of 50 in. Rolls can be loaded manually or automatically direct from floor level. Fully automatic chucks are positively locked into core and do not have to be re-tightened during running. Adjustable up to 67 in., split arm permits loading of 2 rolls with different widths. Single and...

Read More »
Splicers

Cold Shrink Splice Kit is designed for 46 kV cable.

Able to work with tape shield, UniShield(TM), wire shield, and longitudinally corrugated cable, 3M Cold Shrink Splice Kit QS-III 5545A provides everything necessary for splicing 46 kV solid dielectric power cables with conductor sizes from 4/0 AWG to 1,000 kcmil. Splice can be used with standard copper or aluminum inline compression (crimp type) connectors. While cold shrink splice body is...

Read More »
Splicers

Silicone Rubber Branch Splice uses cold shrink technology.

Suited for use by power utilities and industrial contractors, 3M Cold Shrink Branch Splice QS-2001B facilitates process of making wye splice configuration on electrical power cables rated up to 15 kV. It accepts all conductor sizes from No. 2 AWG through 500 kcmil and accommodates main feeder cable runs and taps of 350-500 kcmil conductors. Conductor sizes from No. 2 AWG through 250 kcmil are...

Read More »
Sealed Crimp Splices tolerate high-temperature applications.
Splicers

Sealed Crimp Splices tolerate high-temperature applications.

Featuring temperature rating of 200°C, D-200 MiniSeal Crimp Splices combine nickel-plated copper crimp barrel with separate, heat-shrinkable, transparent sealing sleeve that provides strain relief and environmental protection. They are available for wire range from 26-12 AWG and can be used to seal and protect high-temperature-rated wires with Teflon® insulation, such as RCW and...

Read More »
In-Situ Rebar Splice meets Ultimate Splice requirements.
Splicers

In-Situ Rebar Splice meets Ultimate Splice requirements.

Without requiring bar-end preparation, sawing, or swaging, LENTON® LOCK coupler installs with standard wrench or impact wrench. Gripping technology provides for development of full rebar strength and improved structural integrity in tension, compression, stress reversal, and dynamic applications. With less than 0.004 in. of slip, completed connection performs similar to continuous piece of...

Read More »
Butt Splicer handles variety of converting applications.
Splicers

Butt Splicer handles variety of converting applications.

Suitable for splicing wide range of materials including tag, label, board, film stocks, and other thick or double ply materials, Model S-900AB-ACV-EG automatic butt splicer features heavy-duty cantilevered unwind design that allows rolls as large as 48 in. dia to be accommodated. Web accumulator is separate piece which can be placed at left or right side of splicer, allowing it to work in either...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers