Soldering Machinery

Wave Soldering System combines capacity and capability.
Soldering Machinery

Wave Soldering System combines capacity and capability.

Optimized for production capability and capacity, Electrovert® Electra™ uses IsoThermal convection pre-heat. Full nitrogen tunnel can be field upgraded, and Intelligent Flux Control is available with Full Tunnel feature. Along with 24 in. process width capability, this wave soldering system features integrated fume extraction, dual head ServoJet™ fluxing and DwellMax™ Plus solder...

Read More »
Ultrasonic Lead Soldering and Bus Bar Additions for Heaters and EMI Shielding
Soldering Machinery

Ultrasonic Lead Soldering and Bus Bar Additions for Heaters and EMI Shielding

Abrisa Technologies is a vertically integrated manufacturer of heater elements and advanced display cover glass with EMI filtering. Value-add capabilities now include ultrasonic soldering of wire leads to screen printed and thin film deposited bus bars on index-matched indium tin oxide (IMITO) and anti-reflective (AR) coated glass. Utilizing ultrasonic soldering makes it possible to apply bus...

Read More »
Soldering Machinery

Metcal's MX-500 Bestowed with an EM Asia Innovation Award

GARDEN GROVE, CAÂ- – Metcal today announced that it has been awarded a 2014 EM Asia Innovation Award in the category of Hand Soldering Tools for its MX-500 Soldering and Rework System. The award was presented to the company during an April 24, 2014 ceremony at the Shanghai World Expo Exhibition Convention Center during NEPCON China. “The industry has responded with very positives...

Read More »
BTU International's DYNAMO(TM) Collects Its Third Industry Award during NEPCON China
Soldering Machinery

BTU International's DYNAMO(TM) Collects Its Third Industry Award during NEPCON China

NORTH BILLERICA, Mass.Â- – BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, announces that it has been awarded a 2014 EM Asia Innovation Award in the category of Reflow Soldering Equipment for its DYNAMO™. The award was presented to the company during an April 24, 2014 ceremony at the...

Read More »
Metcal's Updated MX-500 Named Best Hand Soldering Tool at NEPCON China
Soldering Machinery

Metcal's Updated MX-500 Named Best Hand Soldering Tool at NEPCON China

GARDEN GROVE, CAÂ- – Metcal today announced that it has been awarded a 2014 SMT China Vision Award in the category of Hand Soldering Tools for its MX-500 Soldering and Rework System. The award was presented to the company during an April 23, 2014 ceremony at the Shanghai World Expo Exhibition Convention Center during NEPCON China. “The industry has responded with very positives reviews,...

Read More »
Metcal to Demonstrate Updated Rework Product Family NEPCON China
Soldering Machinery

Metcal to Demonstrate Updated Rework Product Family NEPCON China

GARDEN GROVE, CAÂ- – Metcal today announced that it will exhibit in Booth #B-1E25 at NEPCON China 2014, scheduled to take place April 23-25, 2014 at the Shanghai World EXPO Exhibition & Convention Center. The new MX-500 Soldering and Rework System, HCT2-120 Hot Air Pencil and new features on the Scorpion will be demonstrated. Metcal’s updated MX-500 Soldering and Rework System builds on...

Read More »
Selective Soldering System features modular design.
Soldering Machinery

Selective Soldering System features modular design.

With no change-over required, SEHO SelectLine can dynamically process variety of assemblies with short cycle times. Fluxer module, various preheat modules, and soldering modules may be equipped individually, and depending on requirements, they can be configured into complete manufacturing line. Two electro-magnetic soldering units for mini-wave processes may be integrated. With automatic...

Read More »
Placement Equipment

Juki's Complete Line Solutions Concept Peaks Interest at APEX

MORRISVILLE, NC – Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Corporation, announces the successful launch of its Complete Line Solutions at the recent IPC APEX EXPO. Booth traffic and new product interest exceeded the company's expectations. Company representatives demonstrated three lines: a high-speed line, a...

Read More »
Ersa HOTFLOW 4/26 High-end Reflow Soldering System Recognized by Circuits Assembly
Soldering Machinery

Ersa HOTFLOW 4/26 High-end Reflow Soldering System Recognized by Circuits Assembly

Plymouth, WI — Kurtz Ersa North America, a leading supplier of electronics production equipment, announces that it has been awarded a 2014 NPI Award in the category of Soldering – Reflow (Convection) for its HOTFLOW 4/26. The award was presented to the company during a Tuesday, March 25, 2014 ceremony that took place at the Mandalay Bay Convention Center during the IPC APEX EXPO. The Ersa...

Read More »
Juki and Intertec Win NPI Award for New CUBE.460 Selective Soldering System
Soldering Machinery

Juki and Intertec Win NPI Award for New CUBE.460 Selective Soldering System

MORRISVILLE, NC – Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Corporation, along with Inertec Soldering Technologies, are pleased to announce that they have been awarded a 2014 NPI Award in the category of Soldering – Selective for the CUBE.460 Selective Soldering System. The award was presented to the companies...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers