Signal Receivers

ISR Video Receiver targets military applications.
Signal Receivers

ISR Video Receiver targets military applications.

Packaged in standard military-hardened handheld form factor, Model RF-7800T delivers high-resolution, full-motion tactical video to individual warfighters for real-time intelligence, surveillance, and reconnaissance (ISR). Portable, ground-based remotely operated video enhanced receiver (ROVER) accepts video captured by military's fleet of unmanned aerial vehicles. Operating in 1.71-1.81 GHz...

Read More »
CCTV Video Transmitters/Receivers have self-healing feature.
Signal Receivers

CCTV Video Transmitters/Receivers have self-healing feature.

Digital fiber optic video transmitters and receivers with bi-directional data include FVTFVR1010SHR single channel with data series, FVT/FVR4014SHR with 4 video and data channels, and FVT/FVR8018SHR with 8 video and data channels. In event of broken fiber connection, video and data transmission is seamlessly re-routed when system is configured in ring topology. Bi-directional data transmission...

Read More »
Narrowband Radio Modules feature multiple channels.
Signal Receivers

Narrowband Radio Modules feature multiple channels.

Programmed with 4 channels, transmitter Model CDP-TX-05M-R and receiver Model CDP-RX-05M-R feature narrowband FM 25 kHz channel spacing and operating temperature of -20 to +65°C. Using TCXO as reference oscillator circuit of radio component ensures frequency stability. With output of 10 mW authorized for narrow band FM and double superheterodyne receivers with receive sensitivity in...

Read More »
Transmit-Receive Module Pair operates at E-band frequencies.
Signal Receivers

Transmit-Receive Module Pair operates at E-band frequencies.

Operating over frequency spectrum of 71.0-86.0 GHz, E-band TX/RX module pair is designed for broadband point-to-point radios carrying voice and data traffic at multigigabit/sec rates. System features conversion gain of 15 dB and output power of 16 dBm along with power detector on TX output. Supporting modulation formats ranging from on/off keying to 16 QAM modulation, pair also includes on-board...

Read More »
Signal Receivers

Oclaro(TM) New Focus(TM) Photoreceiver Enables Cancer Detection Breakthrough

SAN JOSE, Calif., June 2 /-- Oclaro, Inc. (NASDAQ: OCLR), has announced that its New Focus(TM) 2117 photoreceivers are underpinning an award winning breakthrough cancer detection system developed by scientists from Japan's Kitasato University. This unique optical demultiplexed (OD) optical coherence tomography (OCT) medical imaging system, received the 'Customer Application of the Year' Award...

Read More »
Receiver Subsystem combines high-speed ADCs and drivers.
Signal Receivers

Receiver Subsystem combines high-speed ADCs and drivers.

Housed in 11.25 x 15 mm LGA uModule® package, Model LTM9002 combines dual 14-bit ADC sampling up to 125 Msps, anti-aliasing filters, fixed gain differential ADC drivers, and 12-bit trim DACs. Dual IF/baseband receiver subsystem achieves 90 dB isolation at 140 MHz input frequency. Overall gain is typically 26 dB and varies less than 0.1 dB between 2 channels. Utilizing multi-layer substrate,...

Read More »
Signal Receivers

Digital EMI/EMC Receiver complies with CISPR 16-1-1.

Able to be configured as single- or 4-channel click meter, 30 MHz PMM 9010 offers flexible measurement parameters on frequencies up to 6 GHz that meet all current industry testing standards. It uses A/D conversion and DSP to eliminate aging of critical parts that could degrade measurement accuracy and provide stable performance. Modular unit shows all click details and mandatory reporting...

Read More »
Network Enabled Receivers use optimized processor card.
Signal Receivers

Network Enabled Receivers use optimized processor card.

DMP SCS-1R receivers are available with SCS-150 Main Processor Card, which contains firmware for system operation, provides all time-keeping functions, and controls line cards, keypad, and printer. Featuring 5,000-event memory, card supports panel programming via receiver line cards using auxiliary port as well as receiver system setup programming via SCS-1R keyboard/display and Remote Link(TM)...

Read More »
Multiplexers target high-density CCTV applications.
Signal Receivers

Multiplexers target high-density CCTV applications.

Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages,...

Read More »
Signal Receivers

RFMD® Expands Broadband Transmission Product Portfolio; Enables Enhanced Bandwidth-Driven CATV Services and Advanced Fiber Deep Architectures

New Products Include Industry's First 30dB, 1GHz Power Doubler Amplifier GREENSBORO, NORTH CAROLINA - May 7, 2009 - RF Micro Devices, Inc. (Nasdaq:RFMD), a global leader in the design and manufacture of high-performance semiconductor components, today announced the addition of two new products to the Company's extensive portfolio of broadband transmission products. The two newly released products...

Read More »

All Topics