Signal Receivers

Signal Receivers

Set Top Boxes offer HEVC compatibility and choice of interfaces.

Supporting HEVC format, SML-482 HEVC,- lets operators offer choice of media entertainment with dynamic interfaces. Both SML-482 HEVC Hybrid, with- single tuner in compact case, and SML-582 HEVC Hybrid, capable of hosting multiple tuners and- hard disc, enable operators to combine advanced interactive services with existing broadcast infrastructure and create new services. With its footprint,...

Read More »
Signal Receivers

Seismic and Geodetic System monitors infrastructure.

Combining 220-channel GNSS receiver, broadband seismic recorder, and force-balance triaxial accelerometer, Trimble-® SG160-09 SeismoGeodetic System provides real-time GNSS positioning and seismic data for earthquake early warning and volcano monitoring as well as infrastructure monitoring for buildings, bridges, dams, and other natural and manmade structures. System includes variable size,...

Read More »
Signal Receivers

Keysight Technologies to Showcase Products, Present Technical Papers at EMC 2014

SANTA ROSA, Calif. Keysight Technologies, Inc. today announced it will demonstrate some of its focused products at EMC 2014, the IEEE International Symposium on Electromagnetic Compatibility, Raleigh Convention Center, Booth 323, Raleigh, North Carolina, Aug. 5-7. Keysight experts will demonstrate: full-compliance CISPR16-1-1 and MIL-STD-461 EMI measurements made with the Keysight N9038A MXE EMI...

Read More »
Software Defined Radio Receivers are offered in 2 designs.
Signal Receivers

Software Defined Radio Receivers are offered in 2 designs.

Covering- 100 kHz to 30 MHz range, 8.75 x 6.50 x 2.02 in. MRFS-2501-M and 1U 19 in. rack-mount MRFS-2501-R are stand-alone, black box receivers housing- two Eurocard SDR receiver boards. Communication is enabled via RS-232 serial, USB, or Ethernet ports, while use of 16-bit, 133 MHz ADC and Altera Cyclone III FPGA promotes sensitivity and dynamic range. These products, supporting analog audio...

Read More »
Telemetry Receiver System fosters wireless data logging.
Signal Receivers

Telemetry Receiver System fosters wireless data logging.

By automatically gathering data from any Gen II logger, Gen II RC250 enables monitoring of different values to create custom data logging system. Users can also receive and send Gen II transmitter data to third-party or customized software via Modbus/serial, eliminating need to run wires across plant or factory floor. Supporting 160 channels max, system operated from 110–250 Vac power supply or...

Read More »
TV Tuner features dual NTSC/ATSC/QAM receivers.
Signal Receivers

TV Tuner features dual NTSC/ATSC/QAM receivers.

Supplied on half-height PCI Express board,- WinTV-HVR-2255 is designed for end users and system builders looking for dual tuner TV receiver that supports all standard TV formats used in North America, including ATSC over-the-air HD TV, clear QAM digital cable TV, NTSC analog TV, and baseband video. With dual built-in hardware MPEG-2 encoders, board will convert NTSC and baseband video into high...

Read More »
Signal Receivers

GNSS RTK Receiver targets Esri community.

Weighing 1.5 lb, Model APS-NR2 works on virtually all RTK networks and communicates seamlessly with Esri cloud-based- platforms. Unit- features- dual cellular antennae with automatic switchover, and- built-in Wi-Fi that enables user to configure and monitor unit and stream data directly to tablet. Running all day on hot-swappable batteries, receiver- recharges from any USB port. Open...

Read More »
Miniaturized IR Receivers simplify designs for data transmission.
Signal Receivers

Miniaturized IR Receivers simplify designs for data transmission.

Specified for operation from 2.5–5.5 V, with 0.35 mA supply current at 3.3 V, TSDP34138/56 and TSDP34338/56 are designed for low-speed data transmission and consist of photodiode and preamplifier assembled on lead frame. Epoxy package (6.0 x 6.9 x 5.6 mm) acts as IR band pass filter for use with 940 nm IR LEDs. Using ASK on-off modulated 38.4 or 57.6 kHz signals from emitter with 250 mW/sr...

Read More »
RTK Surveying Receiver features built-in Wi-Fi.
Signal Receivers

RTK Surveying Receiver features built-in Wi-Fi.

Built around 132-channel GPS/GLONASS L1/L2/L2C SBAS receiver, Model APS-NR2 features internal 3.5G Quad-band GSM/GPRS/EDGE cellular modem that supports RTK network connectivity. Rover has Web interface and integrated Wi-Fi for remote configuration and status monitoring, as well as Bluetooth for real-time data streaming. In parallel to RTK positioning, data can be recorded on removable 2 GB SD...

Read More »
Signal Receivers

Angacom 2014: Sagemcom Showcases 4K UHD with 60 FPS

Sagemcom will showcase its latest set-top box innovation - including 4K UHD 60 FPS (frames per second) video, on its booth (hall 10.1 stand p41) RUEIL-MALMAISON, France - Sagemcom 4K UHD set-top boxes also include advanced features such as picture in picture, time shifting, record... Thanks to integrated performing Wi-Fi, the Sagemcom set-top box will allow operators to deliver a superior...

Read More »
Sponsored

Simple Connection – MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics