Convertech's Air Roll Lock Differential Shaft Ensures More Consistent Winding, and Roll Hardness, with Multiple Width Rolls on the Same Shaft
Shafts (Shafting)

Convertech's Air Roll Lock Differential Shaft Ensures More Consistent Winding, and Roll Hardness, with Multiple Width Rolls on the Same Shaft

WHARTON, New Jersey - April 25th, 2008 - Convertech's GlideLock(TM) clutched rollers surpass competitors products by providing an internal slip mechanism to control tensions from .15PLI. Now able to slit widths down to Â-½ inch, Convertech's differential shaft gives converters a better option for slipped core winding. The combination of Convertech's GlideLock(TM) clutched rollers, and...

Read More »
Stainless Steel Spline Shafts handles light/moderate loads.
Shafts (Shafting)

Stainless Steel Spline Shafts handles light/moderate loads.

Kerk® Spline Shaft Series can be manufactured in 304 stainless steel on SS2-SS8 Series spline shafts, which range from 1/8-Â-½ in. dia and include full range of bushing options. To eliminate need for external lubrication and maintenance, entire spline shaft series includes low-friction Kerkote® TFE coating and is available with any combination of basic or anti-backlash bushing;...

Read More »
Custom Fiber Air Shafts for Custom Converting Machinery
Shafts (Shafting)

Custom Fiber Air Shafts for Custom Converting Machinery

Where can an OEM of custom converting machinery go for lightweight air shafts that meet the challenges of handling extra-long, extra-heavy rolls? That's exactly the situation that led Premier Paper Converting Machinery to tap the custom carbon fiber winding capabilities of NimCor, Inc., a nationally known producer of both conventional and carbon fiber air shafts. Premier Paper Converting...

Read More »
Spring Shafts are suitable for rotational motion.
Flexible Shafts

Spring Shafts are suitable for rotational motion.

Flexible spring shafts operate continuously under high speeds and can be used in both left and right hand rotations. Protected by flexible steel sheathing, shafts can be customized to have couplings on either ends. Shock-damping properties allow for use in remote control instruments, transmission of rotational mechanical power, shaft connection, and control of overhead parts. Shafts are available...

Read More »
Misumi Empowers Engineers with Automation Components ...and More
Rollers

Misumi Empowers Engineers with Automation Components ...and More

Configurable Component Tech Seminar to be held during show Schaumburg, Illinois-MISUMI USA, Inc. will display its newest products for factory automation at the upcoming South Pack show in Charlotte, NC on March 19-20. MISUMI is a world leader in supplying fixed and configurable components for all types of motion control, assembly and related factory automation devices. Highlighted at this year's...

Read More »
Ball Bearings

Automotive Technologies for Sustainable Development: Schaeffler Group Presents More Than 20 Innovations for Emission Control and Fuel Economy at the 2008 North American International Auto Show

DETROIT, Jan. 13 -- The Schaeffler Group, a leading manufacturer of rolling bearings, engine and transmissions systems for the automotive industry, has gone on the innovation offensive in order to support sustainable development with more than 20 innovations for the drive train. As a system and engineering partner to the automotive industry, we are in a position to offer a wide range of product...

Read More »
Vehicle Suspensions

Dana Corporation Supplying Drivetrain Components, Modules for All-New 2008 Jeep® Liberty

TOLEDO, Ohio, Nov. 6 -- Dana Corporation announced today that it has begun supplying Spicer® drivetrain products - including front and rear propshafts and front suspension modules - to Chrysler LLC for the all-new 2008 Jeep® Liberty. "Dana has been supplying products for Jeep vehicles since they were first produced and is honored to be selected as an important supplier for 2008 Jeep...

Read More »
Belden Military Standard Universal Joint Achieves Department of Defense Qualified Parts Listing
Universal / Constant Velocity Joints

Belden Military Standard Universal Joint Achieves Department of Defense Qualified Parts Listing

Broadview (Chicago), Illinois, September 2007. Belden Inc.'s extensive line of universal joints and drive shaft assemblies includes a full range of Qualified Parts Listing (QPL) universal joints for government procurement and use in military personnel carriers, multi-role vehicles and aerospace applications. The QPL universal joints are designed and manufactured for a variety of applications...

Read More »
Drive Shafts

Flowserve Enhances Pleuger Azimuthing Thruster Tilted Shaft Improves Net Thrust for Offshore Applications

Dayton, Ohio, USA - July 27, 2007 - Flowserve Corporation, a global provider of fluid motion and control products and services, has made significant enhancements to its Pleuger brand of azimuthing thrusters. These thruster units are multidirectional propeller pods installed on oil platforms and ships in order to allow for intricate vessel positioning. The Pleuger azimuthing thruster advancements...

Read More »
Miniature Spline Shafts do not require external lubrication.
Shafts (Shafting)

Miniature Spline Shafts do not require external lubrication.

Featuring .125 in. OD, SS 2 Spline Shaft series is designed for light- to moderate-load applications where low friction and extended life are critical considerations. Assembly consists of solid steel or aluminum spline shaft, treated with low-friction Kerkote® TFE coating, coupled with plain or thread-mount bushings. To adapt to any required format, custom machining of bushing and spline shaft...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers