Temperature Sensors feature modular design.
Available as cable and compact thermometers, SITRANS TS100 and TS200 are suitable for universal use, such asÂ- detecting temperatures of machine bearings. Compact insertion thermometers have mineral insulated design that makes them flexible as well as resistant to vibration and temperatures up to 1,100°C. SITRANS TS500, available with protective tubes made of solid or welded pipe...
Read More »
Thermocouple Thermometer affords applicational flexibility.
Compatible with K, J, T, E, and S thermocouple types, vibration-resistant Digi-Stem® DST400 is usable from -40 to +3,200°F and available with rigid, remote, or All-Angle probes. Cold Junction Compensation enables system accuracy as high as ±0.5°F, and NEMA-4X Stainless steel housing suits indoor/outdoor installation. DSTCAL software, available separately, lets user reset...
Read More »
Thermometer integrates data logging, graphing capabilities.
Employing included K-type probe, EL-ENVIROPAD-TC is used for spot temperature readings. Data logging mode lets users set unit and leave it to take temperature readings at pre-determined intervals forÂ- desired length of time. In spot measurement mode, thermometer can be used to capture one off temperature readings displayed on screen. Unit can hold 65,000+ readings in...
Read More »
Retractable Needle Thermometer features stainless steel probe.
With temperature range of -40 to 302°F, Model WT2-10 provides accurate measurements for testing internal temperature during food safety inspections. Retractable penetration probe automatically shuts off meter when closed, as well as protects users from sharp tip while not in use. Additional features include min/max readings, audible and visual alarms, and measurement hold function. In...
Read More »
What You Need to Know About Barrier Technology for Your Food Package
Learn about the Benefits of Barrier Technology
Read More »
Handheld Thermometer promotes HACCP, food safety compliance.
Supplied in IP66/67 housing, Saf-T-Log(TM) measures, stores, downloads, and prints temperature data. Windows® desktop software lets user build lists of food items or equipment and set pass/fail ranges. Using interchangeable type K thermocouple probes, unit measures temperatures from -148 to 2,500°F with accuracy to ±0.7°F. Records also show date, time, and operator name....
Read More »
Probe Pyrometer Kit targets tire and rubber industries.
Providing instantaneous readings in 5° increments, KIT-EZK-CR E-Z Probe Pyrometer Kit includes LCD with backlight, input jacks on top and bottom, belt clip and sensor holder for access and storage, and ability to switch between °F and °C. Also included is Reinforced Fine Hypodermic Sharp Needle sensor specifically for tire and rubber industry, and both low battery and open...
Read More »
Thermocouple Thermometer features dual inputs.
Providing up to 2 temperature measurements simultaneously, Model 472A-1 includes large LCD that can show both temperature inputs or one temperature input and differential temperature. Measurement ranges for J-, K-, and T-type thermocouples are -328 to 1,400°F, -328 to 2,498°F, and -328 to 734°F, respectively. In addition to built-in back light, device includes hold button for...
Read More »
Waterproof Thermometer uses all Type K thermocouples.
Constructed of ABS plastic, Traceable® Waterproof Type K Thermometer reads from -328 to +2,372°F and -200 to +1,300°C with respective resolutions of 0.1° and 1°. Microprocessor updates display 2.5 times per second, and 5/8 in. high digits can be read up to 10 ft away. Waterproof design stops dirt, dust, fume, and water ingress, and rubber boot for probe connector...
Read More »
Precision Thermometer features accuracy to within ±0.01°C.
Able to measure temperatures to meet ITS90, CVD, EN60751, and IEC751 standards, F252 comes standard with 2 channels but 4 and 6 channel variations are available. Each channel is able to work with up to 72 user-defined probes to provide precise calibration. Unit offers single, differential, and alternative measurement modes and displays results on large backlit LCD. Delivering accuracy to within...
Read More »Panel Mount Vacuum Gauge Controller - Model 200P
DigiVac has an innovative panel mount wide range thermocouple instrument for 1/8 DIN cutout. The DIGIVAC Models 200P are designed for permanent installation in customers' equipment, and are 1/8 DIN. A opening of 1.66" x 3.625" is suggested. The unit with its rear panel terminal strip is 4" deep, including an allowance for bending of wires. Also available to use with Hastings Tubes is a new...
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
