Z-Foil Resistors feature typical TCR of -
Including Power Coeffient of Resistance (PCR) of Ã-
Read More »Chip Resistors offer resistance tolerances down to 0.01%.
Designed for telecommunication, industrial, and military applications, RN73 series of high frequency resistors are available in 0402 case size packages and standard case package size of 0805. Based on nichrome thin film technology, devices are produced with 3 sputtered layers of resistive metal film. TCR values down to 10 ppm/Ã-
Read More »Shunt Resistor offers 3 W power capability.
Model WSMS5515 Power Metal StripÃ-® meter shunt resistor features processing technique that produces low resistance values ranging from 100-500 Ã-µW. Featuring 4-terminal (Kelvin) connection design, lead (Pb)-free and RoHS-compliant device comes with all-welded construction, inductance values of less than 5 nH, thermal EMF of less than 3 Ã-µV/Ã-
Read More »Metal Oxide Resistors operate up to 235-
Featuring flameproof coating, RS and RSM Series through-hole resistors range from Ã-½-5 W with resistance values from .1 W to 1 MW, and tolerances as low as 1%. Units are suitable for variety of applications, including automotive, drilling equipment, and welding equipment, as well as commercial and industrial kilns and ovens.
Read More »Mitigating Supply Chain Risks for Sheet Metal Components
This ebook provides an overview into mitigating supply chain risks for sheet metal components.
Read More »Variable Resistor Module simulates PT100 and PT1000 RTDs.
Combining fine and coarse control mechanisms with calibration system, 18-channel PXI Model 40-262 provides resistance setting resolution of better than 10 mW over entire resistance range and accuracy of better than 0.1% for all resistance settings. Requested resistance value is provided by use of resistance calls to module. Calibration port can be used to calibrate resistor channels while unit is...
Read More »Current Sensing Resistors operate from -65 to +275-
Available in 3921 and 5931 case sizes, surface-mount Power Metal StripÃ-® Models WSLT3921 and WSLT5931 are 3 and 5 W resistors that incorporate solid metal iron-chrome alloy resistive element with low TCR of less than 20 ppm/Ã-
Read More »Digital Potentiometer features RoHS compliance.
Microprocessor-based DP4 Series is suitable for new equipment as well as retrofitting ac or dc drive systems where precise, repeatable speed setting and digital readout are desired. Unit also supports bipolar connections with power supplies of Ã-
Read More »Chip Resistors have resistance values up to 10 GigW.
Available in standard tape and reel packaging on 7 in. reels, HVC series of high voltage chip resistors have absolute maximum voltage ratings by chip size. Size 2512 is rated up to 25 kV, 2010 is rated to 20 kV, 1206 is rated to 15 kV, 0805 is rated to 10 kV, and 0603 is rated to 5 kV. They maintain capability for .5% tolerance and 25 ppm TCR. Applications include high voltage power supplies,...
Read More »Power Potentiometer offers 25 mm diameter.
Model PE60 provides resistance ranges from 1W to 1MW, dielectric strength of 2,500 Vrms, max operating torque of 4.3 oz.-in., and end stop torque of 6 lb.-in. Cermet element features 6 W power rating at 50Ã-
Read More »Meter Shunt Resistor offers 3 W of power and low resistance.
Supplied in 5515-size package, RoHS-compliant WSMS5515 Power Metal StripÃ-® meter shunt resistor features 4-terminal (Kelvin) connection design and all-welded construction. Processing technique produces resistance values from 100-500 Ã-µW, which provides accuracy in current meter shunt applications for electronic power meters. Other characteristics include inductance values of less than 5...
Read More »Innovative Dampney Coating Systems Suit Even the Most Specialized Applications
Dampney's high performance coating systems provide protection against extreme weather, chemicals, and corrosive environments for atmospheric, immersion, and underground applications. Check out the video to learn more.
Read More »