Current-Sensing Resistors minimize thermal expansion.
Surface-mount Series LR72 A/B/C resistors, with open-center shapes, offer tolerance of +/-5%, inductance value under 10nH, and resistance ratings as low as 0.002 ohms. Types A and B have TCR of +/-100 ppm/deg C and power ratings of 1/2 W @25 deg C and 1/4 W @25 deg C, respectively. Type C has TCR of +/-350 ppm/deg C and power ratings of 1 W @70 deg C and 2 W @25 deg C. Flameproof resistors have...
Read More »Current-Sensing Resistors minimize thermal expansion.
Surface-mount Series LR72 A/B/C resistors, with open-center shapes, offer tolerance of +/-5%, inductance value under 10nH, and resistance ratings as low as 0.002 ohms. Types A and B have TCR of +/-100 ppm/deg C and power ratings of 1/2 W @25 deg C and 1/4 W @25 deg C, respectively. Type C has TCR of +/-350 ppm/deg C and power ratings of 1 W @70 deg C and 2 W @25 deg C. Flameproof resistors have...
Read More »Radial Resistors are available from 1 Ohm to 100 Meg.
CK06 Style package with ratings of 400 Volts, 0.75 Watt at +125 deg C Caddock's Type MK132V/MK632V non-inductive, precision power film resistors are available in the compact CK06 package over the entire ohmic range from 1 Ohm to 100 Meg. Tolerance of 1% is standard and TC is 50 ppm/°C from 5 ohms to 5 Meg. The compact MK resistor with its 0.75 Watt and 400 Volt ratings can replace many different...
Read More »Radial Resistors are available from 1 Ohm to 100 Meg.
CK06 Style package with ratings of 400 Volts, 0.75 Watt at +125 deg C Caddock's Type MK132V/MK632V non-inductive, precision power film resistors are available in the compact CK06 package over the entire ohmic range from 1 Ohm to 100 Meg. Tolerance of 1% is standard and TC is 50 ppm/-°C from 5 ohms to 5 Meg. The compact MK resistor with its 0.75 Watt and 400 Volt ratings can replace many...
Read More »MITIGATING OPTICAL SUPPLY CHAIN RISKS
This white paper provides an overview into mitigating the optic supply chain, common issues and proposed solutions.
Read More »Rotor/Wiper Kit builds potentiometers in any size.
Do It Yourself potentiometer element and rotor wiper assembly kit includes element shaft, shaft insulator, rotor assembly and instructions. Kit is available in standard sizes, or can be customized with virtually any dia, resistance, linearity, thickness or electrical angle required. Resulting potentiometer provides infinite resolution precision sensor that will run continuously for 100,000,000...
Read More »Rotor/Wiper Kit builds potentiometers in any size.
Do It Yourself potentiometer element and rotor wiper assembly kit includes element shaft, shaft insulator, rotor assembly and instructions. Kit is available in standard sizes, or can be customized with virtually any dia, resistance, linearity, thickness or electrical angle required. Resulting potentiometer provides infinite resolution precision sensor that will run continuously for 100,000,000...
Read More »Resistor Array conserves board space.
Bradford, PA - October 25, 2001 - KOA Speer Electronics introduces the new CNK1F8 (size 0602) to its line of chip resistor arrays. The CNK1F8 resistor array incorporates 8 resistors into one package, utilizing less board space than individual chip resistors. With a power rating of 63mW, the unique design of the CNK1F8 integrates the power rating of a larger chip (size 0603) into a smaller width...
Read More »Potentiometer Switch withstands adverse conditions.
Environmentally sealed with transfer-molded epoxy resin and O ring shaft seal, PA 400 potentiometer switch is resistant to elevated temperatures, corrosion, moisture, water and bodily fluids. Its rotation life lasts 25,000 cycles. From basic configuration of 0.394 in. cube with gold contacts, unit is available with bushings, cases, and flat or rounded shafts in varying lengths. It is designed...
Read More »Resistor Array conserves board space.
Bradford, PA - October 25, 2001 - KOA Speer Electronics introduces the new CNK1F8 (size 0602) to its line of chip resistor arrays. The CNK1F8 resistor array incorporates 8 resistors into one package, utilizing less board space than individual chip resistors. With a power rating of 63mW, the unique design of the CNK1F8 integrates the power rating of a larger chip (size 0603) into a smaller width...
Read More »Potentiometer Switch withstands adverse conditions.
Environmentally sealed with transfer-molded epoxy resin and O ring shaft seal, PA 400 potentiometer switch is resistant to elevated temperatures, corrosion, moisture, water and bodily fluids. Its rotation life lasts 25,000 cycles. From basic configuration of 0.394 in. cube with gold contacts, unit is available with bushings, cases, and flat or rounded shafts in varying lengths. It is designed...
Read More »Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »