New Parallel Jaw Grip Offers Maximum Safe Load of 5000 lbs
Features sawtooth jaw profile for extra gripping power for a wide range of EHS and coated cables. Round jaw holds 0.18 to 0.60" diameter cable and spring closes grip on cable holds the initial position. Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks.
Read More »American Electrical Publishes New Video about how to Properly Size and Install a Cable Grip
Tom McCormick, President and CEO of American Electrical, Inc. explains how to properly size and install a cable grip.Â- American Electrical offers three types of thread choices NPT, Metric and PG. The next decision in sizing a cable grip is to determine the cable diameter - once this is done a cable grip can be chosen and installed easily to provide protection against...
Read More »
Nylon Cord Grips reduce cable strain over wide temperature range.
Available in light grey or black nylon with PG or Metric threads, Spiralblock® Cord Grips reduce cable strain at point of entry into enclosure or panel. Flexible extended length of up to 5 in. keeps cables from bending, and construction is designed for use in environments with ambient temperatures from -20Â- to +90°C.
Read More »Wire Grip handles both coated and galvanized guy wire.
Designed for use with cable sizes from 0.16–0.55 in., Chicago® Grip - Coated Guy Wire features sawtooth jaw profile that will not slip on coated or galvanized guy strand. Longer 5 in. jaw also increases surface area in contact with cable, which minimizes cable damage.
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
Hose Strain Relief Kit is available for hose reels.
Available for hand crank and motorized reels with hose IDs from Â-½–1½ in., Coxreels® Hose Strain Relief Kit protects hose fittings and connections from potential damage. Clamp takes on force from over-extended hose during use and protects hose fittings and connections at riser from excessive tension. With this mounted kit, hose remains secured against drum and allows...
Read More »
Manual Wedge Grips meet Nadcap requirements.
Available in 22,000 and 56,000 lbf capacities, Manual Wedge Grips are suitable for tensile tests on composites, metals, and plastics over temperature range of -112 to +482°F. Grips incorporate moving body, driven by worm gear drive, which closes jaw faces together in self-centering action to clamp specimen. Symmetrical construction of grip body provides even clamping of specimen under load....
Read More »
Liquid Tight Cordgrips come in straight-thru and pigtail designs.
Heyco®-Tite Straight-Thru Snap-In-2® Liquid Tight Cordgrips handle flexible cords with .065-1.000 in. dia, while Pigtail versions are suitable for .065-.709 in. dia cords. Both products fit panels from .062-.125 in. thick. Providing liquid tight strain relief protection, they ensure IP 65 and IP 67 seal, have 94V-2 flammability rating, and operate over -22°F to +212°F...
Read More »
AutomationDirect Adds Wiring Cord Grips to Wire Management Products Offering
AutomationDirect has extended its line of Bryant wiring devices to include wire and cable grips, strain reliefs, support grips, and pull grips. Bryant cord strain relief grips are used to connect cable enclosures and industrial equipment and prevent cable pullout at the point of termination. When used in conjunction with bus drop support grips and safety springs, the devices are an integral part...
Read More »
Cable Tray Connector features stainless steel finish.
Available in 316L stainless steel for use in corrosive and exterior environments, FS 41 FASTRUT Connector secures wire mesh tray to strut channel framing without bolts, nuts, or clamps. Unit snaps into place and is held secure by spring steel materials and locking edge design. Connector attaches any size wire cable tray to channel framing using 2 connectors for 12 in. tray or narrower and 3...
Read More »
Innerduct Pulling Eyes are made from chrome-plated steel.
Available in sizes ranging from 1-2.5 in. in length, Innerduct Pulling Eyes (Model 61510) feature threaded body that provides secure attachment to innerduct conduit. Hole in threaded end of pulling eye body provides tie-off of innerduct pulling line or tape, ensuring that unit is not lost during pulling operation. Also available with swiveling head-end and hex feature, pulling eyes can...
Read More »
Aerzen USA Process Gas Blower and Compressor Installations Worldwide
Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.
Read More »
