Printer provides speed of 26 pages per minute.
Printers

Printer provides speed of 26 pages per minute.

Phaser 4400, for letter size black-and-white printing, is equipped with 266 MHz controller that delivers first page out time of 11 seconds. It has total standard input of 650 sheets, duplex capability, and 1200 dpi resolution. Printer offers custom size media support up to 8.5 x 14 in. It includes 64 MB of memory, 10/100 Base-TX Ethernet, and USB and parallel connectivity. Printing Scout alerts...

Read More »
Printers

Printer has space saving footprint.

Available in direct thermal or thermal transfer models, EasyCoder® F4 Compact Industrial bar code label and tag printer has heavy-duty metal hinges and media hanger with the ability to handle full 8 in. label rolls. It runs on 32-bit RISC processor and prints 8 in./sec. Designed for harsh environments, it is fully programmable and can be networked with EasyLAN 100i network interface card.

Read More »
Label Printer-Applicator applies labels to boxes on conveyors.
Labelers

Label Printer-Applicator applies labels to boxes on conveyors.

Model 5200 comes with choice of high-density thermal/thermal-transfer print engines that produce labels with text, bar codes, and graphics. Each engine is available in 203- or 300-dpi models, accommodates pressure-sensitive labels up to 6 in. wide by 6 in. long, and has print speeds up to 12 in. per sec. Model 5200 offers 3 label placement methods: air-blow, flex-tamp, and tamp-blow, all of which...

Read More »
Printers

Thermal Printer offers resolution up to 609 dpi.

Direct-thermal/thermal-transfer Series M-84Pro operates at speeds up to 12 ips. Windows®-compatible unit features 32-bit, high-speed RISC/133 MHz processor and 18 Mbyte on-board memory. It prints barcode, text, and detailed graphics with clear print in addition to 2-D codes such as Micro PDF417 and Micro QR. Additional features include serial, parallel, and USB plug-in interface modules,...

Read More »
Construction Materials for the Future
Sponsored

Construction Materials for the Future

In this eBook, we highlight some key advantages of Cross-Laminated Timber (CLT) and show why every builder needs to consider adopting this remarkable construction advancement. We'll also introduce you to the latest innovation in CLT, GRIPBlock™, an exciting new technology that will change the way you look at CLT forever.

Read More »
Fine Grit Grinding Wheels achieve flatness and parallelism.
Wheels

Fine Grit Grinding Wheels achieve flatness and parallelism.

Fine grinding diamond and CBN wheels offer button structure that allows coolant flow into grinding zone. Powdered metal, steel, and ferrous materials can be ground without burning or other metallurgical damage. Advanced bond technology ensures consistent wheel-to-wheel performance without lapping and conventional grinding. Button wheels are available in 2A2TSSA shape in 4.5 to 45.6 in. dia and...

Read More »
Grinding Wheels feature micro fracturing abrasive.
Wheels

Grinding Wheels feature micro fracturing abrasive.

BRGi vitrified grinding wheels with XG low-pressure abrasive grain, are used for internal diameter and bore grinding. Friable seeded-gel ceramic grain is developed specifically to micro fracture in low-pressure applications, exposing new sharp cutting teeth during grinding process. Grinding wheels are offered in diameters of .204 to 4.500 in., with thickness of .063 to 4.00 in., and grit sizes of...

Read More »
Creepfeed Wheels grind difficult-to-grind materials.
Wheels

Creepfeed Wheels grind difficult-to-grind materials.

Manufactured with extruded ceramic aluminum oxide grain, Altos(TM) wheels have consistent, open structure for effective coolant flow and chip clearance. Extruded ceramic grain produces consistent grain spacing. Operators can increase infeed rates to achieve up to 50% greater material removal rates without burning part or causing excessive wheel wear.

Read More »
Thermal Printer offers features for high-end kiosk use.
Printers

Thermal Printer offers features for high-end kiosk use.

Model FTP-639USL001, 24V-driven, 3 in. printer includes cutter capable of performing full or partial cuts, integrated paper feed and paper guide section, and miniature serial control board. Die-cast frame provides electrostatic protection and heat retention or dissipation. Output speeds include 200, 50, and 30 mm/sec. Operating life is rated at over 500,000 cuts or 100 million pulses. Printer...

Read More »
Marking System is electronically controlled.
Labelers

Marking System is electronically controlled.

Electromagnetically powered CN312Cm integratable marking system features 50 x 40 mm marking window, internal software, and camera mechanism. Unit meets aerospace marking criteria (IAQG SPEC 2000) on metal and plastic parts. Marking performance features 5 x 7 font with characters from 0.5 to 45 mm in height in steps of 0.1 mm. Can be integrated on production lines, assembly lines, or test stations.

Read More »
Modular Labeling System will offer two operating modes.
Labelers

Modular Labeling System will offer two operating modes.

Model ALP/4500 will initially print-and-apply labeling for up to 55 products per min; and with stepper motor module it will perform as label applicator at rate of 1800 ipm. Unit prints and applies variable information including alphanumerics, bar codes, and graphics with max print area of 4.1 in. W x 13 in. L. Print engine delivers 203 or 300 dpi print quality, depending on which head is used....

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers