Pressure Transducer suits low-pressure applications.
Available in 0-0.5 through 0-5 psid/psig pressure ranges, P356 features brass, -¼ in. male NPT pressure port and corrosion-resistant, alumina ceramic diaphragm. Sensor features EMI/RFI protection and is over-voltage, reverse polarity, and short-circuit protected. Excited by 5 Vdc, unit provides 0.5-4.5 linear signal output proportional to pressure. Unit also incorporates variable capacitance...
Read More »MEMS Pressure Sensor suits hydraulic/pneumatic applications.
Model P4000 incorporates micro-machined piezoresistive sensing technology in all welded, stainless steel package. Pressure ranges include 0-100 through 0-5,000 psi absolute or sealed gage. Unit has total error band of -
Read More »
Tone Indicator offers multiple tone outputs.
Panel mounted with .250 QC terminals, Model TRIP-4353-3 Audio Alert produces continuous, fast- or slow-pulse tones for applications where multiple tones are required to indicate different conditions. It has 43 mm OD, overall height of 33 mm, and operating voltage range of 6-28 Vdc. Suited for medical and diagnostic equipment in noisy environments, unit produces sound frequency rated at 2,900 -
Read More »Tactile Sensors integrate into data acquisition systems.
User-configurable, Industrial Tactile Sensors quantify high pressure measurements in industrial and elevated temperature environments. TactArray technology allows user to configure mats up to 24 x 100 in. with 1-16,000 0.08 in. elements on as little as 0.3 in. centers. Capacitive-based sensors are Kapton-® encapsulated, enabling stable operation across temperature range of -100 to 400-
Read More »
Understanding Food & Beverage Lubricants
The term "food-grade lubricants" may sound like another name for food oils such as cooking spray, salad dressing, lard, or canola oil, but it actually refers to lubricants that are safe for use in food processing equipment.
Read More »
Pressure Transducer suits submersible applications.
With CVD strain-gauge design, Model 528 is resistant to aging and insensitive to thermal transients and pressure cycling. Modular design has various pressure fittings and electrical connections, and all wetted parts are constructed of corrosion-resistant 17-4 PH stainless steel. Product exhibits 0.1% FS accuracy over -20 to +212-
Read More »
Pressure Sensor produces digital and analog outputs.
Model DS provides RS485 or RS232 output and 0-5 Vdc analog output. Digital output eliminates need for interface card with connection to PC or data acquisition system. Frequency response of analog output and 380 readings/sec of digital output meet test and measurement requirements. All-welded, stainless steel sensor has combined accuracy of -
Read More »Stainless Steel Pressure Sensors withstand hostile media.
Suited for use with corrosive liquids or gases, SPT Series sensors measure pressure of hostile media in harsh environments. They utilize piezoresistive semiconductor chip construction and oil filled housings. Able to handle any media that will not attack 304 or 316 stainless steel wetted parts, sensors are capable of measuring up to 5,000 psi. NEMA 4 rated sensors support gage, vacuum gage, and...
Read More »
Sensor Kit increases pressure rating to 350 psi.
Available for commercial sensor products (CSP) for high-pressure environments, kit consists of flange with fitted O-ring and 3 screws. Flange kit fits onto all CSP metal sensor heads, making it suitable for high-pressure applications such as hydraulic or air operated devices. Sensor line is manufactured with stainless steel sensor tube and is shielded to prevent signal interruption. Each sensor...
Read More »
Isolated Pressure Sensors have stainless steel construction.
Available with or without integral ceramic thick film network for temperature compensation and calibration, 13 mm Series Stainless Steel Isolated Pressure Sensors use piezoresistive semiconductor sensor chip in oil-filled isolated housing. Used with voltage or current supplies, sensors are available with weld ring collar, back support ring, and pressure ranges from 500-5,000 psi. Products are...
Read More »
Pressure Transducer suits HVAC/refrigeration applications.
Compact Ashcroft-® KM10 features overpressure capabilities, all-welded construction, and EMI ratings to 100 V per meter. Ingress protection rating of IP67 protects it from effects of weather, wash downs, and temporary immersion in water. All-welded 17 PH stainless steel sensor and industrial circuit make product suited for use on pumps, engines, and transmissions.
Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.
Read More »