Oscilloscopes

Oscilloscopes operate in 400 MHz to 2 GHz bandwidth range.

WaveRunner Xi-A Series devices include WaveRunner digital oscilloscopes, M-Type Oscilloscopes, and Vehicle Bus Analyzers that incorporate X-Stream(TM) II hardware to optimize acquisition and display speed. They also include TriggerScan(TM) rare event capture technology to optimize debug and analysis. Featuring motherboard with Intel® Core(TM)2 Duo processor, systems also offer LAN eXtension for...

Read More »
PC-Based Oscilloscope offers data transfer via USB.

PC-Based Oscilloscope offers data transfer via USB.

Designed for in-tandem use with high-performance PC, GAO2902 digital storage oscilloscope is suited for applications in science, medicine, engineering, and telecommunications industries. It offers 80 MHz bandwidth, 250 MS/sec sample rate, and 1M sample memory buffer with 250 MHz 8-channel logic analyzer and FFT spectrum analyzer. Additional applications include maintenance of electric equipment...

Read More »

Optical Sampling Oscilloscopes target 40 and 100 G networks.

Single-channel PSO-101 enables eye-diagram analysis and pattern visualization within existing high-speed optical networks, while PSO-102, offered in dual- or quad-channel versions, is built for next-generation networks with advanced modulation schemes. Bit rate-independent test solutions can measure phase- and amplitude-modulated signals with measurement bandwidth of more than 500 GHz. Software...

Read More »

Oscilloscopes feature 12.1 in. XGA LCD.

InfiniiVision 7000 Series oscilloscopes, available in 4 models with bandwidths from 100 MHz to 1 GHz, deliver deep-memory waveform update rate of up to 100,000 waveforms/sec. Units are 7 in. deep and weigh 14 lb, with display size enabling up to 20 channels to be shown simultaneously with serial protocol. Configured via number of software options, oscilloscopes deliver optimized signal visibility...

Read More »

Digital Oscilloscopes range from 200 MHz to 1 GHz.

Incorporating 10.4 in. touchscreen, LXI-compliant WaveSurfer Xs-A and MXs-A provide 5 and 10 Mpts/ch memory, respectively. Units support serial data trigger and decode packages to analyze I2C, SPI, UART, RS-232, CAN, and LIN busses. Users can troubleshoot systems using color-coded overlays, search capabilities, and tabular view of bus traffic. Offering 5 GS/s max sample rate at 600 MHz and 5 GS/s...

Read More »

Oscilloscope Software provides SATA compliance testing.

Designed for Infiniium oscilloscopes, N5411B Test Software performs range of tests for general specifications, transmitted signal requirements, and out-of-band specification for SATA products. Program provides design and validation engineers with way to verify physical layer transmitter compliance for SATA 1.5, 3.0, and 6.0 Gb/s silicon, host bus adapters, port multipliers, and high-density,...

Read More »

USB Scope Adapter combines features of 7 devices.

Including 2-channel, 10-bit, 20 MS/sec, 2 MHz oscilloscope; 2-channel spectrum-analyzer; and 3 MHz 8-bit arbitrary-waveform/standard-function generator with 8 digital I/O lines, CircuitGear CGR-101(TM) also functions as network analyzer, noise generator and PWM output source. Oscilloscope, generator, and digital I/O are operated from custom open-source Tcl/Tk software, and device is also...

Read More »

Oscilloscope offers 12-bit resolution and 1% accuracy.

With 80 MSa/sec real-time sampling rate and input ranges from ±50 mV to ±100 V full-scale, PicoScope4000 scope can handle small signals from sensors as well as higher voltages from power supply circuits and motor drives. Deep 32 MSa memory allows scope to capture over 400 msec of data at maximum sampling rate. Powered from standard USB 2.0 port, unit features 12-bit 2/4-channel 20 MHz...

Read More »
Digital Storage Oscilloscopes deliver flexible performance.

Digital Storage Oscilloscopes deliver flexible performance.

Models 2540 and 2542 are 2-channel DSOs featuring 60 and 100 MHz max bandwidths, respectively; up to 1 GS/sec sample rate; and 4,000-point record length for each channel. While auto measurement functions and analog-style knobs facilitate use, troubleshooting and debugging are aided by such features as various triggering capabilities, digital filtering, waveform recorder, delayed sweep/zoom, mask...

Read More »

Digital Oscilloscope offers 1 GSa/sec real-time sample rate.

With one-touch automatic setup, DS1000E 2-channel digital oscilloscope provides 25 GSa/sec equivalent sample rate and up to 100 MHz bandwidth. It has 1 Mpts of memory depth, enabling users to display instantaneous signals as well as abnormal signals quickly, expediting troublesome circuit debugging. Features include 5.6 in. TFT color LCD with wide viewing angle, USB-connectivity, built-in FFT...

Read More »

All Topics