New UXR-Series Oscilloscopes Enable Wideband Analysis
Delivers fast, affordable and coherent analysis for wideband measurements up to 110 GHz. Offers bandwidth model that matches typical RF equipment. Provides signal integrity with EVM below 0.6 percent for 5G new radio (NR) FR2 tests and 1 percent for 802.11ay technologies.
Read More »
New Hand-held Oscilloscopes Available in 60, 100 and 300 MHz Bandwidth Models
OX9000 series used as an oscilloscope, multimeter, harmonic analyzer or logger. Features 7” WVGA wide color FFT touch screen with 800 x 480 dpi with manual or automatic brightness. Ideal for Field troubleshooting, education, electronic and industrial maintenance applications.
Read More »
Tektronix Announces 3 Series MDO and 4 Series MSO Oscilloscopew with Sample Rates of 6.25 GS/s
The 4 Series MSO provides bandwidths up to 1.5 GHz and uses 12-bit ADCs and the 3 Series MDO offers bandwidths from 100 MHz to 1 GHz. The 3 series Mixed Domain Oscilloscope provides 2.5 GS/s or 5 GS/s and up to 8.25 GS/s. Offers built-in spectrum analyzer up to 3 GHz and a standard record length of 31.25 Mpoints with option for 62.5 Mpoints and 10 Mpoints.
Read More »
New WaveRunner 9000 Series Offers Large Display, High Power Toolbox, Wide Range of Bandwidths and Improved Resolution up to 11 Bits
Features 15.4" display, bandwidths from 500 MHz to 4 GHz and sample rates up to 40 GS/s. Offers the industry's deepest toolbox and most complete collection of serial data debug and validation solutions. Ideal for embedded/automotive and EMI/EMC testing.
Read More »
Choosing the Right Type of Chemical Gauge
Understanding the Differences in Chemical Gauges and Their Material Options
Read More »
New PicoScope 9404-05 Oscilloscope has Four 5GHz 50 Ohm Input Channels, Each with its Own Advanced 12-bit ADC
Captures pulse and step transitions to 70ps, impulses down to 140ps and clocks and data eyes to 3Gb/s. Features comprehensive built-in measurements, zooms, data masks and histograms. Brings affordable high-speed performance by combining the benefits of real-time and equivalent-time sampling with high analog bandwidth.
Read More »
New Siglent SDS5000X Series Oscilloscopes Offer a Maximum Record Length of 250 Mpts
The Saelig’s Siglent SDS5000X Series Oscilloscopes are offered in 2 or 4 channel versions with bandwidths of 350MHz, 500MHz, and 1GHz. The units offer a waveform capture rate of up to 480,000wfm/s in Sequence Mode. The device comes with serial decoding protocols such as I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B. The oscilloscopes feature 10.1 in. capacitive touch screen,...
Read More »
New InfiniiVision 1000 X-Series Oscilloscopes are Embedded with MegaZoom IV ASIC Technology
The InfiniiVision 1000 X-Series Oscilloscopes are available at 70, 100, and 200 MHz and provide 4-wire Serial Peripheral Interface (SPI) decode and remote connection via local area networks (LANs). The units come with the capabilities of frequency response analyzer, function generator, protocol analyzer, digital voltmeter, and frequency counter. The LAN connectivity of the units allow multiple...
Read More »
Saelig Offers SDS2000X-E Series Oscilloscopes with Capture Rate of 400,000 Frames/sec
The SIGLENT SDS2000X-E Series Oscilloscopes are offered in 200 MHz and 350 MHz bandwidths. The devices offer a maximum sampling rate of 2GSa/s and a standard record length of 28 Mpts/ch. The oscilloscopes support multiple powerful triggering modes such as built-in serial bus triggering and decoding (I2C, SPI, UART, CAN, LIN). They utilize SPO technology that enables minimum vertical input range...
Read More »
Saelig Introduces Cleverscope CS448 Oscilloscope with an Isolated 65 MHz Signal Generator
The Cleverscope CS448 four-Channel 200MHz Oscilloscope is designed for measuring high voltages up to 1600 V. The device features input ranges of ± 8.0 V and can withstand 1 kV working voltage between each channel and ground. The unit delivers a sampling of 500 MSa/s and the four channels are phase aligned with skew of ±140 ps. It is offered with built-in Link Port for controlling accessory...
Read More »
Saelig Introduces Economical Teledyne Test Tools (T3) Range of Test Equipment
A new range of oscilloscopes, signal generators, power supplies, DMMs and spectrum analyzers is now available in the Teledyne LeCroy brand Fairport, NY, USA: Saelig Co. Inc. has announced the launch of Teledyne Test Tools (T3), a branded portfolio that adds a comprehensive range of test equipment to the range Teledyne LeCroy product offerings. T3 products complement and leverage Teledyne...
Read More »
Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »
