FCI-Burndy-® Products Now Offers Range of Implo(TM) Implosive Connector Products
New product offerings include Jumper Terminals, Full Tension Joints, Dead End Joints, and Repair Sleeves FCI-BURNDYÃ-® Products, a leading manufacturer and provider of connector and tooling solutions to the industrial, telecom, and energy industries, has added to its portfolio of products for Transmission Interconnect applications with the introduction of a range of IMPLO(TM) implosive...
Read More »
FCI-Burndy® Products Now Offers Range of Implo(TM) Implosive Connector Products
New product offerings include Jumper Terminals, Full Tension Joints, Dead End Joints, and Repair Sleeves FCI-BURNDY-® Products, a leading manufacturer and provider of connector and tooling solutions to the industrial, telecom, and energy industries, has added to its portfolio of products for Transmission Interconnect applications with the introduction of a range of IMPLO(TM) implosive connector...
Read More »TOLCO Seismic Bracing is Now FM Approved
TOLCO passes unprecedented testing CORONA, Calif. -- (May 28, 2008) - TOLCO is pleased to announce that its seismic bracing products have recently passed through a rigorous and unprecedented test standard created by FM Global Engineering. This makes TOLCO the first manufacturer of seismic bracing products to attain this approval. The FM test procedure was a dynamic test and the first one of its...
Read More »TOLCO Seismic Bracing is Now FM Approved
TOLCO passes unprecedented testing CORONA, Calif. -- (May 28, 2008) - TOLCO is pleased to announce that its seismic bracing products have recently passed through a rigorous and unprecedented test standard created by FM Global Engineering. This makes TOLCO the first manufacturer of seismic bracing products to attain this approval. The FM test procedure was a dynamic test and the first one of its...
Read More »6 Challenges Faced by Supply Chain Leaders in Discrete Manufacturing and How Analytics Solves Them
This eBook describes the challenges faced by Supply Chain Leaders in Discrete Manufacturing. From consumer electronics to automotive manufacturing, most of the global economy's largest industries rely on discrete manufacturing. Manufacturers in these industries face several unique challenges. The COVID-19 pandemic, followed by war, created major disruptions in supply chains worldwide, stressing the need for more integrated, transparent systems that would facilitate proactive management and faster decision-making. With supply chain issues expected to continue in 2022 and beyond, this ebook will help describe to supply chain leaders ways to prepare for certain global challenges.
Read More »
Swivel Attachment supports up to 4 in. pipe.
Featuring 360/90-° swivel properties, TOLCO® Figure 75 can be used to hang rods on pitched roof, as upper attachment for fire protection branch line restraint, or as seismic attachment for hanger rods. Made of steel with electro-galvanized finish, unit meets UL Listing for 3/8 in. rod, to support up to 4 in. pipe.
Read More »
Swivel Attachment supports up to 4 in. pipe.
Featuring 360/90-° swivel properties, TOLCO® Figure 75 can be used to hang rods on pitched roof, as upper attachment for fire protection branch line restraint, or as seismic attachment for hanger rods. Made of steel with electro-galvanized finish, unit meets UL Listing for 3/8 in. rod, to support up to 4 in. pipe.
Read More »
Swivel Clamp Connector Joints come in various metric sizes.
Offered as assembly of 2 swivel clamp connectors, Swivel Clamp Connector Joints are made of aluminum in black plastic coated finish or matte shot-blasted finish. Joints have machined clamping bores and are available with steel or stainless steel cap screws or hex screws and nuts. They may also be used with adjustable levers in place of screws.
Read More »
Swivel Clamp Connector Joints come in various metric sizes.
Offered as assembly of 2 swivel clamp connectors, Swivel Clamp Connector Joints are made of aluminum in black plastic coated finish or matte shot-blasted finish. Joints have machined clamping bores and are available with steel or stainless steel cap screws or hex screws and nuts. They may also be used with adjustable levers in place of screws.
Read More »
Cold Shrink Electrical Joint is designed for 28 kV cables.
Designed as all-in-one splice, Raychem Cold Applied Shrinkable Joint (CSJA) suits medium voltage polymeric cable applications to 28 kV. Major elements - stress control, insulation, shielding, and re-jacketing sleeve - are pre-expanded on one holdout. Construction is based on silicone rubber joint body, and electrical stress control is provided by factory-molded stress cones and Faraday cage. Kits...
Read More »
Cold Shrink Electrical Joint is designed for 28 kV cables.
Designed as all-in-one splice, Raychem Cold Applied Shrinkable Joint (CSJA) suits medium voltage polymeric cable applications to 28 kV. Major elements - stress control, insulation, shielding, and re-jacketing sleeve - are pre-expanded on one holdout. Construction is based on silicone rubber joint body, and electrical stress control is provided by factory-molded stress cones and Faraday cage. Kits...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
