
Micro-Inverters for Lighting are qualified for loads up to 35 W.
By providing selectable 120 or 277 Vac emergency power to connected load up to 35 W, IIS-35-I allows operation of LED, fluorescent, or incandescent fixtures with full light output in emergency mode. LED loads are qualified for up to 35 W (NEMA 410), and product also carries UL listings for USA and Canada. Along with replaceable integral battery, features include up to 250 ft remote mounting...
Read More »CCFL Controller IC increases LCD backlighting control.
Supplied in 28-lead, plastic SOIC, LX6502(TM) brings PureBLACK(TM) mega-contrast dimming to 24 V CCFL inverter applications in small- to large-sized LCDs. IC offers mega-contrast dimming and fully integrated on-chip 12 V gate drivers to support full-bridge, high- and low-side N-channel power MOSFET configurations with input voltages to 35 V. In addition to protection functions, product integrates...
Read More »
Smart Force(TM) EL Inverters from ERG Offer Plug-and-Play Power Solutions for Backlighting and Illumination Applications
Endicott, NY, November 2008 - The family of Smart Force(TM) DC-AC EL inverters from Endicott Research Group (ERG) Inc. provides a wide range of standard and custom solutions for display and device designers who need to power electroluminescent (EL) backlit LCDs or devices where EL is used for accent and decorative lighting. EL is still a very viable technology for backlighting flat panel displays...
Read More »Development Kit enables small fluorescent UV design.
Providing assortment of 69 UV lamps ranging from high-intensity UVC to UVA blacklight, GB-UV1 Development Kit contains 19 inverters, as well as cabling and other accessories. Various wavelengths for emission, voltage inputs for power requirements, and sizes make kit valuable for prototype and development efforts. Housed in wood chest with brass fittings and lock, kit provides components used in...
Read More »
The Benefits of Safety Grating Over Similar Options
In this eBook, discussed are the factors to consider when choosing the right safety grating for your application and details about the varieties offered by Metalex.
Read More »
Development Kit facilitates small fluorescent UV design.
Suited for research and design engineers working with experimental ultraviolet applications, GB-UV1 Kit provides assortment of 69 UV lamps ranging from high-intensity UVC to UVA backlight. Packaged in wood chest with brass fittings and lock, kit also contains 19 inverters, as well as cabling and other accessories. Components vary in wavelength, voltage input, and size for use in medical,...
Read More »
Inverters suit electroluminescent backlit LCDs or devices.
Vacuum encapsulated Smart Force Series DC-AC inverters prolong lamp life by automatically adjusting operating voltage and frequency. Suited for battery-operated devices, LPS series consumes less than 400 mW per unit load, while JLA Series powers imported EL lamps used to backlight LCD modules. Inverters are available in Standard E600, E300, EMini-EL for small displays in portable, hand-held...
Read More »
Low-Profile Inverter powers large CCFL-backlit LCDs.
Series DmF6 DC-AC Inverters measure 9 mm high and power CCFL-backlit LCDs in 19-24 in. diagonal size range. Inverters power 6 CCF lamps with combined power up to 60 W, providing starting voltage up to 2,400 V with flicker-free brightness control from 0-100%. Inverter also features transformers and connectors for direct connection to display on board measuring 9.52 x 2.83 in. Six mounting holes...
Read More »DC/AC Inverter powers up to 4 CCFL tubes in LCD displays.
Designed for use in Sharp and Optrex 15 and 17 in. LCDs, KLS-170A single-board dc-to-ac inverters provide brightness control, on/off control features, and 80% min operational efficiency. They feature 10.8-13.2 V input range, 3.0-6.5 mA output current per lamp, and 204 Hz typ PWM brightness control frequency. Suited for medical and industrial equipment applications, products feature total device...
Read More »
Inverter powers automotive LCDs.
Fully encapsulated P44W DC-AC inverter offers starting voltage of up to 3,000 Vrms. It provides up to 15 watts of output power, runs at up to 9 mils boost current for quick warm-up in cold starts, and performs over operating temperature range of -30 to 85-
Read More »
DC-AC Inverters power multi-tube LCD modules.
MD Series drives up to 16 CCF tubes with combined power of 10-60 W. High-efficiency inverters can be dimmed using external analog control signal that interfaces with onboard pulse width modulator. Inverters can dim to less than 0.5% duty cycle, for dimming ratio of 200:1. Depending on backlight, dimming ratio of 1000:1 can be achieved. Five mounting holes on each module make installation simple....
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »