Load Banks

Regenerative AC Load Bank reduces energy expense by 90%.
Load Banks

Regenerative AC Load Bank reduces energy expense by 90%.

Built around 60 kVA chassis, PEL Series simulates range of test capabilities and supports parallel use to meet requirements of higher-power applications. Series also accepts standard AC input ranges from 120–480 V and provides grid-synchronized, regenerated AC power output that returns 90% of equipment under test load power back to utility. Load settings modes include constant current, constant...

Read More »
Cummins forms Global Power Testing Partnership with Crestchic
Load Banks

Cummins forms Global Power Testing Partnership with Crestchic

Following a highly successful installation of four resistive-reactive loadbanks at global power leader Cummins' manufacturing plant in Fridley, Minnesota, Crestchic has been awarded preferred status to partner in testing its products across the globe. Cummins designs, manufactures, sells and services diesel engines and related technology around the world. It initially approached leading...

Read More »
DC Electronic Loads offer transient operation up to 25 kHz.
Load Banks

DC Electronic Loads offer transient operation up to 25 kHz.

Comprising 3 models ranging from 150–250 Watts, 8600 Series can sink current up to 60 A at wide voltage ranges up to 500 V. Programmable benchtop units can operate in constant current, constant voltage, constant resistance, and constant power modes. Built-in battery and LED test mode functions make loads suitable for testing variety of DC sources. For remote control and programming, series...

Read More »
Load Banks

Load Banks facilitate testing of diverse AC power sources.

With 700–3,750 kW capacity range and air-cooled power resistor, Taylor Load Banks provideÂ- contained, organized, and fully controllable load for testing of generators, UPS, and other AC power sources. Voltage options include all common 3-phase 50/60 Hz or 208–240/480 Vac dual voltage. Heavy-duty units, offered in portable and stationary versions, also include digital load...

Read More »
Electronic Loads simulate wide range of LED types.
Load Banks

Electronic Loads simulate wide range of LED types.

Intended for LED lighting power supply development and test applications, 41D and 42D LED Loads support 300 W each and are capable of handling voltages to 500 Vdc.Â- Up to 4 loads can be installed in 44M04 modular load chassis. Dual channel 42D5006 load module can simulate 2 LED strings for total of 8 strings per chassis. With PWM control interface, LED dimming features can be controlled and...

Read More »
Modular Electronic Loads are rated up to 1,800 W.
Load Banks

Modular Electronic Loads are rated up to 1,800 W.

Featuring 6-slot design, ML1800 Series can be specified with up to six 300 W or three 600 W modules. Modules offer current ratings of 60/120 A with voltages up to 80, or 10/20 A with voltages up to 500 V. Equipped with 8 in. TFT color LCD, loads provide CC, CV, CR, CP, short circuit, battery, and LED operating modes. Units offer 16-bit programming and measurement resolution, as well as 20 kHz...

Read More »
Electronic Load offers 1,000 V high voltage capability.
Load Banks

Electronic Load offers 1,000 V high voltage capability.

With input rating of 0–1,000 Vdc at 0–120 A, Model EL9718E-M1 is capable of sinking 6,000 W of input power. All connections are found at rear of unit and can be enclosed for safety. Offering CC, CR, CV, CC+CV, CR+CV modes of operation with dual range 16-bit resolution measurements, load is protected against OP, OC, OV, OT, and reverse polarity. Special features include 999 measurements per...

Read More »
Electronic DC Loads target EV battery development/testing.
Load Banks

Electronic DC Loads target EV battery development/testing.

With power levels from 5–60 kW per unit, programmable 5VP Series covers battery packs used for EV and HEV automotive applications. Units incorporate, in addition to test capabilities, built-in and customizable battery discharge functions. DC power supplies can be added to test setup to include battery charging as well. Available with 60, 600, or 1,000 Vdc max input voltage ranges, these floor...

Read More »
Electronic Loads feature liquid-cooled design.
Load Banks

Electronic Loads feature liquid-cooled design.

Housed in compact case, LW 5100 Gen. 2 Series is suitable for linear and nonlinear load test applications. Units provide 4 modes of operation, including constant voltage, constant current, constant resistance, and constant power, all of which can be adjusted through programmable touchscreen, rotary encoder, external remote unit, and CAN bus interface. Operating up to 400 V/750 A with one module,...

Read More »
Electronic Loads simplify battery testing.
Load Banks

Electronic Loads simplify battery testing.

Facilitating testing or characterization ofÂ- individual battery cells or multi-cell stacks, EL97xx series has 0–500 V input rating, offers 150–6,000 W power ratings, and can be combined to provide >6,000 W of load to accommodate any current carrying component. Battery testing can identify individual faulty cells, while automated testing provides repeatability. Features...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers