Lights

Fluorescent Fixture is UL 1598 listed.

Fluorescent Fixture is UL 1598 listed.

Featuring hinged ballast plate, Series 229H Fluorescent Fixture comes with 5 ft wire whip that eliminates need to open fixture during wiring process. Constructed of 20 gauge white enamel finished steel, 4 ft, 4-lamp product is available with 32, 40, 44, and 54 W lamp output options and operates from 110-277 V. Fixtures can be mounted behind glass for use in paint booth applications, or suspended...

Read More »
Incandescent LEDs emit 3,000 K warm white color.

Incandescent LEDs emit 3,000 K warm white color.

Offered in standard 5 mm size, Series L200-XIW Super Bright LEDs feature water-clear dome lens housing that allows for 20° viewing angle. Solid-state design renders LEDs impervious to shock, vibration, frequent switching, and environmental extremes. They are suited for mini lamps, displays, telecommunications data products, pushbutton switches, safety area lighting, street lighting, and medical...

Read More »
Bench Light is suited for industrial task lighting.

Bench Light is suited for industrial task lighting.

Woodhead® Bench Light provides direct overhead illumination in harsh, demanding workspaces. Rated at 120 V, 60 Hz, this fluorescent light source measures 57 in. long and has 2 x 3 in. width profile. Extruded aluminum housing with anodized silver finish protect against corrosion, while impact-resistant polycarbonate lens protects lamps from accidental damage. System uses cold-start ballast, and...

Read More »
Crank-Charge LED Flashlight does not use batteries.

Crank-Charge LED Flashlight does not use batteries.

Emerge 'N See Light uses 3 ultra-bright LEDs to produce beam of white light, which is generated by cranking built-in handle. Thirty seconds of cranking provides up to 30 minutes of continuous light, and 2 settings, selectable via pushbutton, determine amount of emitted light. Featuring compact, heavy-duty construction, flashlight comes in metallic silver or metallic blue colors.

Read More »
Considerations for Choosing a Plastic Injection Molder
Sponsored

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Read More »
LED Lamp is stop, turn, and tail lamp with reflex reflector.

LED Lamp is stop, turn, and tail lamp with reflex reflector.

Measuring 1 3/8 in. thick with overall size of 11 x 3 7/8 in., Model 267 LED Signal Lamp conforms to ECE regulations in both left- and right-hand drive countries. Horizontally mounted using 2 M6 bolts, lamp provides resistance to vibration and shock, low power consumption, and never needs bulb replacement. Lamp is designed for use in rugged environments, making it suitable for agricultural,...

Read More »

High Bay Light provides temporary lighting.

Metal halide 400 W High Bay Light provides output of 36,000 initial lumens at 4,200° Kelvin color rendering. When properly installed and mounted 15 ft above 40 x 40 and 60 x 60 ft bays, light meets OSHA 1926.56 requirements for minimum illumination of work areas. Multi-voltage style unit features Type O lamp and mogul socket to prevent insertion of non-compliant style lamps. Heavy-gauge welded...

Read More »

Surface Mount LED suits portable and backlight applications.

Available in all colors utilizing AlInGaP and InGaN technologies, high-brightness Series HT-F199 measures 1.6 x 0.8 x 0.25 mm and is based on lead frame architecture for optimized optical, thermal, and electrical performance. Units produce typical luminous intensities of 20-25 mcd at 5 mA for blue and 60-65 mcd at 5 mA for white. Consistency in color and brightness is achieved by wide 120°...

Read More »
LED Assemblies produce any color in visible spectrum.

LED Assemblies produce any color in visible spectrum.

OVTL09LGM Series Lednium LED assemblies combine red, green, and blue LEDs in 10 W, package with 120° viewing angle. Assembly features 221 lm luminous flux with typical on-axis intensity of 68 cd. DC forward current/peak pulsed forward current is 1.05/3 A, respectively, and typical forward voltage is 8.6 V with 15 V reverse voltage. Featuring -50° to +80°C temp range, LEDs suit architectural...

Read More »

Work Light features self-righting design.

Measuring 3 ft tall, 360° Wobble Light sits on rounded, counter-weighted base that keeps it upright through bangs and bumps. Polycarbonate dome and floating shock system protect bulb from jarring and strikes, while internal ventilation system ensures that unit stays cool to touch. Power outlet built into base allows users to plug in power tool or daisy-chain several Wobble Lights together. Light...

Read More »

Marine Light offers fully dimmable operation.

Available in 12 or 24 V operation and constructed of non-corrosive materials, Sunnex Marine Light HS is IP65-class weatherproof as well as dust and flush proof. It features 20 W halogen light, dimmable from full power down to zero. Flexible arm, available in 500 and 700 mm lengths, facilitates movement. For night use, optional red lens is suited for open flying bridges and rib-boats.

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics