Lighting Ballasts

Electronic Ballasts offer flexible housing options.
Electrical Equipment & Systems

Electronic Ballasts offer flexible housing options.

SmartMate® ballasts, available in Dual Entry, Bottom, and Side Lead housing options, are designed for operation of one or two 13, 18, or 26 W compact fluorescent lamps (CFLs) or one 32 or 42 W, 4-pin CFL. Integral Quik-Start(TM) technology ignites CFLs in less than 1.0 sec, while IntelliVolt® technology enables operation at any input voltage from 120-277 V, 50/60 Hz. Along with low-profile...

Read More »
Fluorescent Ballasts offer universal input voltages.
Electrical Equipment & Systems

Fluorescent Ballasts offer universal input voltages.

Available in standard and high output options, T5 and T5/HO Electronic Ballasts feature 108-305 V input voltage and are intended for commercial office, retail, distribution warehouses, and industrial high bay lighting applications. Suited for indirect and pendant mount fixtures, T5 family helps maintain lamp life with automatic end-of-life shutdown. Units are used in Energy Star® compliant...

Read More »
Controls & Controllers

Atmel and IXYS Release New Light Ballast Demo Kits

NANTES, France, May 31 / Atmel® Corporation (NASDAQ:ATML), a global leader in the development and fabrication of advanced semiconductor solutions, announced today the release of dimmable and non-dimmable demo kits for light ballast applications. These new kits are the result of a cooperation between Atmel and IXYS Corporation to develop design tools and speed up the implementation of ballast...

Read More »
Electronic Ballasts feature -20
Electrical Equipment & Systems

Electronic Ballasts feature -20

Able to provide reliable operation in extreme conditions, Centium® electronic ballasts for 2-Lamp T5/HO lamp applications feature programmed-start ignition and total harmonic distortion under 10%. IntelliVolt® multiple-voltage technology enables operation at any input voltage from 120-277 V, 50/60 Hz. Suited for high-bay fixtures as well as refrigeration applications, ballasts are also...

Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
Sponsored

How to Effectively and Efficiently Clean Heat Exchangers, Part I

For refineries and petrochemical plants, cleaning heat exchangers is a dirty job but somebody has to do it. While there are many approaches on how to clean shell and tube heat exchangers, it is indisputable that the right method is absolutely critical for ensuring that equipment is fully operational. Otherwise, you could end up with a potential equipment shutdown, which will cost you time and money. In this three-part series, you will learn about the various benefits, methods, and obstacles involved in heat exchanger cleaning. Part one introduces the fundamentals of cleaning, as well as explores the pros and cons of on-site versus off-site services. Download the first of this three series to assist you in finding the best solution for your dirty job here.

Read More »
T5 Ballast provides light level switching capability.
Electrical Equipment & Systems

T5 Ballast provides light level switching capability.

Designed for use with F28T5 lamps, Ballastar® T5 ballast (B228PU95S50D) features programmed start technology, universal input voltage (120-277 V), and end-of-lamp life shutdown circuitry with auto-reset. Single control lead lets user switch from full light output down to 50% power level using standard wall switch or lighting relay. Available with ballast factor of .95, ballast is suited for use...

Read More »
Electrical Equipment & Systems

Electronic Ballast replaces magnetic T12 ballasts.

Designed for use with F96T12ES lamps, Basic-12(TM) B260I120M-A provides same amount of light as magnetic T12 ballasts while reducing energy consumption by more than 20%. It complies with federal ballast efficiency requirements for installation into new fixtures as well as with 2010 requirements for replacement ballasts. Unit features parallel lamp operation so when one lamp fails, other lamps...

Read More »
Electrical Equipment & Systems

Electronic HID Ballasts suit metal halide lamps.

Featuring IntelliVolt® multiple-voltage technology, e-Vision® Ballasts include 70 and 100 W Reduced-Profile models and 150 W Dimming model with 0-10 V dimming interface and dim ability to 60% lamp power. All ballasts feature 85°C max case temperature, as well as safety features, including automatic lamp power control and lamp monitoring. They are suited for downlighting and accent lighting...

Read More »
Electrical Equipment & Systems

Electronic Ballasts drive 1-4 fluorescent T8 lamps.

Available in both Instant Start and Programmed Start models, as well as Low, Normal, and High Ballast Factor versions, Optanium® 2.0 Electronic Ballasts are compatible with 40, 32, 25, and 17 W standard T8 lamps as well as 4 ft 30, 28, and 25 W energy-saving models. IntelliVolt technology enables operation at any input voltage from 120-277 V, 50/60 Hz. Anti-striation circuitry, lamp end-of-life...

Read More »
Electrical Equipment & Systems

Dual-Lamp T5 Ballasts feature operation-efficient design.

AccuStart5 T5 ballasts B228PUNV95-D and B228PUNV115-D, suited for use with F28T5 lamps, are available with .95 and 1.15 ballast factor options for flexibility in lighting design layout. Along with programmed start technology, products feature 120-277 V universal input voltage and end-of-lamp life shutdown circuitry with auto-reset. Operational efficiency facilitates compliance with ASHRAE 90.1...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics