Electronic Ballasts work with metal halide lamps.
Prismatron(R) may be used with 320, 350, and 400 W conventional and pulse start metal halide lamps. Ballasts provide continuous dimming control to as low as 25% of lumen output. Units may be used with low-voltage control circuitry, including occupancy sensors, or programmable controls. Ballasts are FCC compliant for compatibility with other EMI and RFI sensitive electronic devices, and provide...
Read More »
Ballasts offer programmed rapid start technology.
AccuStart(TM) High Performance (HP) ballasts are designed for frequently switched applications. They have overall height of 1.18 in., universal input voltage of 108 to 305 V, and less than 10% THD. Lamp filaments are properly heated before igniting lamps, which yields 50% increase in lamp life, providing more than 50,000 lamp cycles.
Read More »
HID Ballasts suit indoor and outdoor applications.
Multi-5(TM) high-intensity discharge ballasts include 480 V tap in addition to quad ballast, which is capable of 120, 208, 240 and 277 V. Line includes ballasts for Pulse Start 175, 200, 250, 320, 350, 400 and 750 watt models. 277 V reactor is available for applications operating 175 to 400 watt pulse start lamps.
Read More »
Lighting Ballasts have low-profile design.
Triad(R) ballasts, with 1.0 in. height, are designed for 1- and 2-lamp operation and include models for T5 and T5/HO lamps, ranging from 14 to 54 watts. T5 and T5/HO ballasts have universal-input voltage of 108 to 305 V, end-of-lamp-life shutdown circuit with auto reset, less than 10% THD, programmed rapid-start technology, and plug-in lead connectors. Applications include indirect, pendant...
Read More »
Next-Gen Nanoparticle Arc Shields
This white paper provides an overview into integrating nanoparticles into Paulson face shields.
Read More »
Fluorescent Ballasts fit multiple lamp applications.
Triad(R) T8 low profile electronic ballasts allow maximum fixture flexibility. Suitable for pendant mount and specialty lighting applications, they have small cross section and 1.18 in. height and width of for indirect/direct fixtures. Ballasts accept input voltages of 108 to 305 V, has instant start operation, operate at less than 10% THD, and have plug-in lead connectors for easy installation....
Read More »
Lamp Ballasts conserve energy.
Triad(R) high efficiency lamp/ballast system can lower energy consumption by 11% in T8 lamp applications, as compared to company's previous products. Ballasts conserve energy without sacrificing lamp life or light output and are suitable for retrofits and replacements. They operate standard or high-efficiency T8 lamps. Total harmonic distortion (THD) is less than 10%, and units are available with...
Read More »
Ballasts operate pulse-start metal halide HID lamps.
F-Can Ballasts incorporate Xtenza(TM) ignitor technology, making them suitable for remote mounting and permitting lamp-to-ballast distances up to 50 ft. Models operate on 120 or 277 V systems. All components including core and coil, dry-film capacitor, and ignitor are encapsulated in single metal case. Ballasts feature auto-reset thermal protection for both voltage taps. They are available for...
Read More »
Ballast operates 57-watt fluorescent lamp.
SmartMate(TM) ICF-2S42-M2 ballast is designed to operate 1 triple compact fluorescent lamp, which provides approx 4,300 initial lumens at 25 deg C. Ballast is available with length mounting feet or bottom-mount PEM studs, and single-entry or dual-entry connectors. IntelliVolt(TM) universal voltage allows operation on systems ranging from 120 to 277 V, 50/60 Hz. Ballast offers lamp end-of-life...
Read More »
Dimming Ballasts are designed for T5/HO lamps.
Mark X Powerline Dimming Ballasts provide 100% to 1% full-range dimming for 1 or 2 F54T5/HO, FT55W, or FC12T5/HO fluorescent lamps. They feature programmed-start operation; lamp ignition at any light setting, including 1% dim level; operation above 40 kHz to minimize risk of interference problems; and lamp end-of-life detection system. Ballasts are encapsulated in low-profile cases measuring...
Read More »
Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »
