Injectors

Injectors

Chemical Injector suits small dose applications.

With injection range of 1:3,000-1:333, or 0.03-0.3%, Model D14MZ3000 is suited for application of peracetic acid, quaternary ammonium, and other food sanitation chemicals that must be applied in small doses. Injector features flow range of 0.05-14 gpm and pressure range of 4.3-85 psi. Measuring 21 x 6 5/16 in., unit is manufactured from chemical-resistant polypropylene with metal-free piston.

Read More »
Single-Port Midspan powers access points, PTZ security cameras.
Injectors

Single-Port Midspan powers access points, PTZ security cameras.

Fully functional in harsh environments, POE33U-1AT has output of 33.6 W at 56 V that compensates for up to 7.65 W in wire drops to devices that may be up to 100 m away from network switch. IEEE802.3at-compliant power injector, safe for indoor/outdoor use, is rated IP67 and operates from -40 to +65°C. With min average efficiency rate of 70%, midspan supports gigabit Base-T data rates and...

Read More »
Injectors

Outdoor-use PoE Midspans support IEEE 802.3at standard.

Single-port, 60 W midspan, PD-9501GO/AC, delivers power along with data over standard Ethernet cabling to outdoor devices, such as WLAN access points and IP cameras. It supports IEEE802.3at standard at 10/100/1000 Mbps data rates and is backward-compatible with IEEE802.3af standard. Offering plug-and-play installation, midspan integrates surge protection for AC and PoE ports, operates in...

Read More »
Integrated HPLC Injector is designed for OEM integration.
Injectors

Integrated HPLC Injector is designed for OEM integration.

Available in 4-, 6-, 8-, and 10-port configurations in stainless or PEEK, Cheminert® C55 Series uses Cheminert HPLC injector design and 24 V motor. Control requires single momentary contact closure, which steps valve to next position, and separate contact closure moves valve to position 1 (Home). Optional serial interface board permits RS232 communications for position input control and...

Read More »
Passive PoE Midspans are IEEE 802.3af compatible.
Network / Ethernet Switches

Passive PoE Midspans are IEEE 802.3af compatible.

Designed for Category 6 Gigabit Ethernet lines, single-port Model BT-CAT6-P1 and 4-port Model BT-CAT6-P4 use Gigabit transformers on all 4 data pairs. Units feature die-cast aluminum housings with integral mounting feet for long-term installations. In addition to minimizing EMI on Ethernet lines, metal housing provides grounding via directly attached grounding lug and terminal. Midspans are...

Read More »
Vacuum Pumps

Diffusion Chamber injects CO2, neutralizes process water pH/TSS.

Resting above water drawn from concrete plant's cleanest detention basin or final weir, diffusion and injection chamber mixes CO2 gas into flowing water. Gas bubbles convert to carbonic acid and lower pH value. Specifically, concrete-grade 5000 Series models are set to lower settled process water to 7.5 pH, for release from plant property, and total suspended solids (TSS) to 14-17 range. CO2...

Read More »
Passive PoE Midspan powers multiple devices in remote locations.
Injectors

Passive PoE Midspan powers multiple devices in remote locations.

Supplied in IP67 housing, fully isolated POE33U-560DO delivers 56 Vdc output per port and offers minimum output efficiency of 70%. Power injector has total output of 33.6 W for 2 outdoor IEEE802.3af-compliant applications. Intended for use on outdoor utility poles for IP cameras, device relays data between ports in order to allow wireless access point to be deployed for data transfer while...

Read More »
Single-Port PoE Midspan/Injector uses shielded RJ-45 jacks.
Power / Signal Splitters

Single-Port PoE Midspan/Injector uses shielded RJ-45 jacks.

Designed to fit in 2.12 in. spaces, Model BT-CAT5-E1 can either inject or tap up to 48 Vdc on unused wires in standard Category 5 cable. Device utilizes two 10/100 BaseT shielded RJ-45 jacks and one male 2.5 mm power connection. Available individually or with 48 or 70 W power supply, passive midspan/injector includes power indicator LED and overcurrent protection circuit. Applications include...

Read More »
Food Processors

Air Products Will Exhibit Its Freshline® Solutions at International Poultry Expo to Help Processors Improve Productivity, Lower Costs, and Produce High-Quality Products

Poultry Expo to Help Processors Improve Productivity, Lower Costs and Produce High-Quality Products LEHIGH VALLEY, Pa. - Poultry processors looking for ways to improve productivity, increase product yield and lower costs while producing high-quality products can turn to Air Products' (NYSE: APD) Freshline® solutions. The company will be highlighting its range of technology and equipment...

Read More »
Cooled Cell Injection System increases cell viability.
Injectors

Cooled Cell Injection System increases cell viability.

Footswitch-activated NanoCool Cell Delivery System delivers injections from 367.4 pL/min to 1.906 mLpm and provides up to 11 lb adjustable force. Programmable methods, up to 100 of which can be stored, enable automatic recall of entire cell delivery protocol. With preprogrammed bolus injection mode, users are only required to specify injection size and time of dispense. Maintaining cells at...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers