Industrial / Specific Purpose Computers

Mini Industrial Computers handle PLC tasks.
Industrial / Specific Purpose Computers

Mini Industrial Computers handle PLC tasks.

Featuring Intel Celeron or Pentium III processor, Series C63xx control cabinet PCs have removable internal chassis and are fully operational when chassis is removed. All PC connections are located on one side, while 3 mounting sides offer installation variations. Pentium III unit can execute 1,000 lines of PLC code in less than 25 Â-µs. For networking, units provide on-board Ethernet...

Read More »
Panel PC handles difficult environmental conditions.
Industrial / Specific Purpose Computers

Panel PC handles difficult environmental conditions.

Model T15-ERGO features completely closed, powder-coated aluminum chassis for protection against external influences. Milled aluminium front of housing is rated IP65, while back is protected in accordance with IP54. Providing touchscreen technology, 15.1 in. TFT display has thermally pre-stressed and coated glass. Backplane holds up to 3 free slots. FDD, HDD, and CD-ROM drive assemblies are...

Read More »
Industrial PC offers continuous operation at 5-45°C.
Industrial / Specific Purpose Computers

Industrial PC offers continuous operation at 5-45°C.

Tailored to customer requirements, PC Box Lite 300 is available with Intel Celeron 2.0 GHz or Intel Pentium 4 processor running at 2.4 GHz. RAM is expandable from 128 Mb to 4 Gb. Hard disk drive with 40 Gb capacity is standard, with option of CD-ROM drive. Box Lite 300 has 10/100 Ethernet interface, 4 USB 2.0 ports, and several serial interfaces. Applications include operator terminals and...

Read More »
Light-Duty PC suits factory automation applications.
Industrial / Specific Purpose Computers

Light-Duty PC suits factory automation applications.

Offered with 1,200 MHz Intel® Celeron® or 1.26 GHz Pentium® III processor, 1504 Light-Duty Industrial Node PC offers 6-slot passive backplane with 3 expansion slots: full-length ISA, full-length PCI, and half-length PCI. Onboard video port uses up to 32 MB system RAM. System has 150 W AC power supply and comes with CD-ROM, floppy, and Windows 2000. It features 10/100 Base-T...

Read More »
CompactPCI System features 15 in. LCD monitor.
Industrial / Specific Purpose Computers

CompactPCI System features 15 in. LCD monitor.

Portable CompactPCI Computer, Model ACP661 includes keyboard and six 6U slots for system boards and/or application specific peripheral cards. Standard package uses cPCI server blade with Intel's® Pentium 4, 1.7 GHz Processor-M, which complies with cPSB systems and supports PICMG 2.16 standard. System includes 1 GB RAM at DDR 266 MHz speeds, 2.5 in. HDD for up to 40 GBs of storage, and dual...

Read More »
Digitizer PXI Module features 89 dB signal-to-noise ratio.
Industrial / Specific Purpose Computers

Digitizer PXI Module features 89 dB signal-to-noise ratio.

UltraFast UX4540 is a 3U PXI card with 2 high-speed, 16-bit vertical resolution digitizer channels. It offers 1 MS/s maximum sampling rate, 500 kHz bandwidth, internal and external triggering, and external clocking. Each channel can be programmed with 1 of 4 input ranges ±1 V to ±10 V. Card can record signals to onboard memory or continuously transfer digitized data gap-free across...

Read More »
Controller/I/O Cards feature Intel Pentium 4-M processor.
Industrial / Specific Purpose Computers

Controller/I/O Cards feature Intel Pentium 4-M processor.

Controller card MIC-3318 is equipped with 400 MHz system bus, 512 Kb on-die L2 cache, support for DDR memory, and 2 Ultra ATA 33/66/100 high-speed IDE drives. Model MIC-3753 is a 72-bit digital I/O card for CompactPCI bus. I/O lines are divided into nine 8-bit I/O ports, allowing user to configure each port as input or output. General-purpose MIC-3780 is a multi-channel, counter/timer card for...

Read More »
Industrial / Specific Purpose Computers

Single Board Computer provides 6 video channels and 10 Gbps.

Suited for telecom and defense applications, CompactPCI Model CX269 features hyperthreaded Pentium IV Xeon processors and utilizes 4-port switched-fabric hub to achieve aggregate I/O bandwidth of 10 Gbps. It is available with up to 8 Gb of DRAM, 3 Ethernet ports, 8 USB ports, Ultra Wide SCSI 160/320, PMC expansion, and two 800 Mbyte/sec FireWire 1394B ports. Socketable processors deliver 2.6 GHz...

Read More »
Flat Panel Computer supports 20 years of cutout capability.
Industrial / Specific Purpose Computers

Flat Panel Computer supports 20 years of cutout capability.

Measuring 7.4 in. deep with 6.4 in. mounting depth, 3712KPM all-in-one industrial computer comes with 12.1 in. SVGA flat panel LCD; Celeron® 850 MHz CPU; 256 MB RAM; 20 GB hard drive, and CD-ROM and floppy drives. Operator input options include keypad with integrated industrial mouse; touchscreen is optional. Able to be used with PC compatible devices, unit has onboard 10/100 Base-T...

Read More »
Waveform Generator PCI Card generates signals to 125 MHz.
Industrial / Specific Purpose Computers

Waveform Generator PCI Card generates signals to 125 MHz.

Using 14-bit D/A converters, UF6031 Arbitrary Waveform Generator (ARB/AWG) PCI card for PCs generates complex analog signals at rates of 125 MS/s on both channels. Device also includes up to 512 MB onboard signal memory that allows each channel to generate signals up to 256 MS. It features 3 software-selectable hardware filters, external clock and trigger connectors, and Total Harmonic Distortion...

Read More »

All Topics