Gas and Chemical Sensors / Detectors

Gas Detector is diffusion-based.
Gas and Chemical Sensors / Detectors

Gas Detector is diffusion-based.

PointWatch Eclipse point infrared combustible gas detector continuously monitors hydrocarbon gases in 0 to 100% lower explosive limit range. Standard outputs include isolated 4-20 mA signal with HART(TM) and RS-485 serial communication. Heated sapphire optics have removed weather shielding to speed inspection. Unit includes integral wiring termination box plus tri-color LEDs for normal, alarm,...

Read More »
pH/ORP Sensors use differential electrode technology.
Gas and Chemical Sensors / Detectors

pH/ORP Sensors use differential electrode technology.

pHD(TM) electrode sensors use 3 measuring electrodes. Process and reference electrodes measure pH differentially, with respect to third ground electrode, reducing reference junction fouling and minimizing ground loops. Preamplifier boosts electrodes' mV signals for transmission up to 3,000 ft. PEEK(R) and Ryton(R) bodies provide chemical resistance in aggressive process solutions. Convertible,...

Read More »
Residual Gas Analyzer industrial coating applications.
Gas and Chemical Sensors / Detectors

Residual Gas Analyzer industrial coating applications.

Prisma 80 residual gas analyzer and leak detector monitors gases in vacuum coating system to ensure that correct vacuum conditions exist. It has 32-bit operating system with TalkStar® software for setup and configuration. Multiscan windows permit simultaneously displaying screens of wide-ranging scans or focusing in on key components. Design features include integrated total pressure...

Read More »
Gas and Chemical Sensors / Detectors

Four Gas Monitor offers single button operation.

Custodian C measures combustible gas, oxygen, carbon monoxide and hydrogen sulfide. Backlit display shows gas levels and automatically scrolls between readings. If gas is detected, multi-tone siren is triggered, together with flashing LEDs which are visible over 270 deg angle. Auto-zero function assures user of correction operation upon switch on. Monitor is fully water resistant; monitor and...

Read More »
Conductivity Sensor comes in polypropylene housing.
Gas and Chemical Sensors / Detectors

Conductivity Sensor comes in polypropylene housing.

OEM torroidal (inductive) conductivity sensor has housing that resists corrosion, coatings, and fouling. Installation for submersion is achieved by connecting 3/4 in. coupling and conduit to sensor's 3/4 in. NPT. In-line mounting into 2 in. tee is achieved using coupler. All sensors are provided with 20 ft of 5-conductor cable and choice of integral temperature compensators, such as 100 or 1000...

Read More »
Gas Detector Systems cover over 30 different gases.
Gas and Chemical Sensors / Detectors

Gas Detector Systems cover over 30 different gases.

Wall Mount Gas Detectors are designed for monitoring combustible and toxic gases over extended period of time in enclosed areas and/or work environments. Relay contact is provided for connecting to central panel, remote alarms, ventilation units and other emergency devices. Remote series features open space remote sensing; remote sensor is explosion proof and provided with NEMA-type weatherproof...

Read More »
Gas Detectors have adjustable setpoints and alarms.
Gas and Chemical Sensors / Detectors

Gas Detectors have adjustable setpoints and alarms.

Detectors measure carbon monoxide, ammonia, LP/gasoline vapors, hydrogen and combustible gas continuously. Sensor elements are explosion proof and rated for Class 1 Division 1, Group A, B, C, and D hazardous atmospheres. Detectors have audible and visual alarms, meter read-out, failure and pilot signals, circuit-test buttons and alarm-set check buttons. Models are available for 115 Vac or with...

Read More »
Gas Detector ensures safety in hazardous environments.
Gas and Chemical Sensors / Detectors

Gas Detector ensures safety in hazardous environments.

S4000C Intelligent Gas Detector offers remote mounting up to 7,600 ft, dual redundant MODBUS communications, 8 amp relays, 3-digit display, 4-20mA output, and indication of remaining sensor life. Electronics are contained in explosion-proof housing. Microprocessor-based transmitter is designed for use with catalytic bead sensors. It monitors combustible gases and vapors within lower explosive...

Read More »
Gas Monitoring System offers fixed-point detection.
Gas and Chemical Sensors / Detectors

Gas Monitoring System offers fixed-point detection.

AirWare(TM) wall-mounted detector is capable of monitoring 1 of 6 gases including carbon monoxide, chlorine, hydrogen sulfide, nitrogen dioxide, oxygen or sulfur dioxide. Enclosure is made of ABS plastic and provides protection from water and RFI. Unit features on-board relay activation and/or 4-20mA output to central controller. It includes LED display and 2 adjustable alarm levels with SPDT...

Read More »
Gas Monitors feature 5 combustible gas ranges.
Gas and Chemical Sensors / Detectors

Gas Monitors feature 5 combustible gas ranges.

GT-Innova monitors detect combustible gases, oxygen, and up to 2 toxic gases (carbon monoxide, hydrogen sulfide, chlorine, hydrogen cyanide, ammonia, nitric oxide, nitrogen dioxide, sulfur dioxide or phosphine). Units provide on-demand display of PEAK, STEL, and TWA readings. Features include sample draw pump, datalogger, Innova View(TM) datalog and configuration package, gas ranges of 0-1000 ppm...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers