Foams

Wrap

Foam Wrap compensates for subsea well annular pressure.

Typically installed within B or C annuli of subsea wells, CFW+ (Crushable Foam Wrap) acts as mechanical fuse and collapses at pre-determined pressure and temperature (110Â-ºC) envelope. This allows expansion of annulus fluids as well as dissipation of any potentially hazardous increase in pressure. By incorporating Glass Bubbles, solution helps mitigate subsea well casing failure due to...

Read More »
Foams

Black Spray Foam is formulated for commercial vehicles.

Suited for sealing, coating, and stabilizing components of commercial vehicles, Handi-Foam® Commercial Vehicle 2-component spray foam acts as seal for vehicle's frame and undercarriage, fills holes from wire penetrations, and prevents moisture infiltration in headlight and taillight housing. It is available in disposable and refillable systems and features Magnum(TM) Heated System with...

Read More »
Foams

Foam has light weight needed for aircraft composite structures.

Optimized for weight and flame, smoke, toxicity (FST) performance, Ultem foam is suited for use as core material for aircraft composite skin/core/skin structures. It is based on Ultem polyetherimide (PEI) resin and demonstrates noise reduction coefficients greater than 0.3. Offered in 3.8, 5, and 6.9 lb/ftÂ-³ densities, foam boards are suitable for composite manufacturing processes and...

Read More »
Instrument / Tool / Equipment Cases

United Foam, A UFP Technologies Brand, Creates Tool Control Solution For The United States Army And Marines

ADDISON, IL - August 27, 2008 - United Foam, UFP Technologies brand, has created a foam tool control solution for a combined mobile tool kit contract with Armstrong Tools, a division of Danaher Corporation and Pelican(TM) Products, Inc. for the United States Army and Marines. The joint mobile tool kit called the General Mechanics Tool Kit (GMTK) is a portable solution for transporting and storing...

Read More »
Air-Cushioning Bubble incorporates recycled material.
Fillers

Air-Cushioning Bubble incorporates recycled material.

Made from up to 20% post-consumer recycled content and up to 20% industrial scrap, Astro-Bubble® Green is designed for use as surface cover and void-fill to protect fragile items. Sizes from 1/8-Â-½ in. dia are available in coextruded and monolayer linear-low density polyethylene (LLDPE) versions to address various packing requirements. Solution is engineered to incorporate at least...

Read More »
PP Sheet Foam protects fragile contents.
Miscellaneous Film

PP Sheet Foam protects fragile contents.

Available in 1/32, 1/16, 3/32 in. sizes, Microguard(TM) low-density polypropylene (PP) sheet foam is optimized for cushioning and surface protection properties as well as vapor transmission, thermal, and insulation. Coefficient of friction provides protection for easily scratched finishes against vibration and shifting during transit. Recyclable and photodegradable, product has melt point of...

Read More »
Resins

Foams meet low out-gassing standards.

Manufactured from ultra-pure Kynar PVDF polymer in process that uses only inert nitrogen gas to expand polymer sheet, ZOTEK® F Foams are in lowest risk category for out-gassing of VOCs and ammonia. Polymer resins are recognized by semiconductor, biotech, and medical industries as having very low extractables that migrate from resin matrix, as well as optimal flammability properties and...

Read More »
Construction Equipment

Spray Foam comes in open- and closed-cell formulas.

CertaSpray(TM) Foam Insulation sticks to surfaces, creates air seal, and can be used in whole house and building applications or in combination with fiber glass insulation, particularly in hard to reach areas such as cathedral ceilings, knee walls, and roof decks. By reducing air leakage, polyurethane spray foam minimizes hot and cold spots and maintains indoor air quality by impeding penetration...

Read More »
Foams

Closed-Cell Foam exhibits low OSU heat-release results.

Manufactured from Kynar® PVDF resin with low-smoke additive, ZOTEK® F HT LS conforms to stringent FAR 25.856(a) radiant-panel test required for thermal and acoustic insulation applications in aviation industry. Tested at 13 mm, foam obtains heat-release value totaling 14.0 kW-min/mÂ-² and peak heat-release value of 12.2 kW/m². Foam can be thermally molded into complex...

Read More »
Foams

Zotek® N B50 Polyamide Foams Offer Enviable Dimensional Stability In Various High-Temperature Applications

Walton, KY - Since high temperatures can cause certain foams to shrink, degrade or soften to the point of being unusable, Zotefoams Inc., the world's leading manufacturer of cross-linked block foams, recently conducted a series of tests on its ZOTEK® N B50 line of foams in order to measure product performance characteristics at high temperatures. The tests included thermal dimensional...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics