CMT Materials to Showcase HYTAC® Syntactic Foam Plug-Assist Materials at K 2019 Exhibition
ATTLEBORO, Mass., May 29, 2019 – CMT Materials, the leading provider of plug-assist materials for the thermoforming industry, will showcase its range of HYTAC® syntactic foams at the upcoming K 2019 exhibition, which runs Oct. 16-23, in Düsseldorf, Germany. In Hall 3/G83, CMT Materials will highlight the latest innovative plug-assist materials – HYTAC C1R and HYTAC XTL – which have...
Read More »
DUNAPOL® C Pour-In-Place Polyurethane Insulation Implemented at Major LNG Projects
Pourable System Offers Process Efficiency Improvement Over Legacy Insulation Techniques BAYTOWN, TEXAS (PRWEB) MAY 17, 2019 DUNA-USA, a manufacturer of polyurethane and polyisocyanurate foams and chemicals for the aerospace, automotive, insulation, marine, and construction industries, has partnered with Insulations Inc. an oil and gas industry insulation contractor, to provide DUNAPOL® C...
Read More »
New LAST-A-FOAM FR-4800 Withstands Peak Temperatures up to 480 degree F
Thermally-stable tooling board can be used with high-temperature resin systems. Ideal for use in the production of high-tolerance complex shapes and parts due to its predictable and repeatable CTE. LAST-A-FOAM® FR-3800 FST polyurethane foam core satisfies fire, smoke and toxicity (FST) requirements.
Read More »
New LAST-A-FOAM FR-4800 High Temperature, Low CTE Tooling Board Provides Companies a Thermally-stable Material for High-tolerance Parts
Enables aerospace, automotive and composites-manufacturing companies the ability to manufacture tools and parts for prototypes, concept proofs, short-run production parts and other applications. CTE is similar to aluminum that provides alternative tooling system that is cost-effective, dimensionally predictable and stable.
Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Check out this white paper to see how the IoT can be used in your hotel to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.
Read More »Integritemp Announces the Release of REFOAM
Omaha, NE: Integritemp, a division of Plastilite, is excited to announce the introduction of REFOAM, an environmentally friendly Expanded Polystyrene (EPS) product that is both oxo-biodegradable and recyclable. “We’ve been in R&D mode with REFOAM for the last few years working to create a material that will give our customers all the familiar benefits of EPS, but with added environmentally...
Read More »
New Intercept Foam Reduces and Neutralizes Harmful Gases in Closed Spaces
The Intercept Foam is offered in small and large foam stock sizes of 3.5 x 2.5 x 0.5 in. and 11-7/8 x 11-7/8 x 0.5 in. respectively. The product can be placed into safes, compartments, cabinets, console, containers and drawers. The foam is suitable for use in electrical boxes, guns safes, engine compartments and cylinders and tubes. This product should be dried and applied in dry environment.
Read More »
ACH Foam Technologies' Foam-Control® Geofoam Keeps People Moving
DENVER, Feb. 27, 2018 - When unstable geological conditions outside of Brigham City, Utah required an alternative structural-fill for the embankments of a highway overpass, ACH Foam Technologies’ Foam-Control® Geofoam proved to be the ideal solution. “Over 30 years, I’ve seen many engineering innovations,” says Betty Purdie, P.E., project manager for one of Utah’s largest builders of...
Read More »
CMT Materials to Showcase HYTAC® Syntactic Foam Plug-Assist Materials at NPE2018
ATTLEBORO, Mass., February 27, 2018 – CMT Materials, the leading provider of plug-assist materials for the thermoforming industry, will showcase its range of HYTAC® syntactic foams at the upcoming NPE2018 May 7-11 at the Orlando County Convention Center in Orlando, Fla. (Booth #W9121). CMT Material’s plug-assist materials will be featured at the booths of several leading thermoforming...
Read More »
SWM to Exhibit a Full Range of Advanced Materials for Medical Application Design at MD&M West Expo 2018
SWM International (NYSE: SWM) will exhibit its comprehensive portfolio of advanced materials for the medical industry at the MD&M West Expo in Anaheim, California on February 6-8, 2018, booth #1371. ALPHARETTA, GA. - FEBRUARY 02, 2018 - SWM International (NYSE: SWM) will exhibit its comprehensive portfolio of advanced materials for the medical industry at the MD&M (Medical Design & Manufacturing)...
Read More »
Quik-Shield 108YM Foam offers 3.6 per in. R-value.
Quik-Shield 108YM Ultra-Low Density Foam provides densities as low as 0.36 lbs per cu-ft. Product can be easily mixed using a pneumatic or electric mixer. This allows applicators to spray an 8 in. pass on a roof deck from up to 15 ft away without the foam dripping and offers wide operating temperatures and pressures. Product delivers an yield of 26,000 board ft per set of material.
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
