Fixed Capacitors

Wet Tantalum Capacitors offer capacitance to 1,000
Electronic Components & Devices

Wet Tantalum Capacitors offer capacitance to 1,000

Featuring glass-to-tantalum hermetic seals, T18 Series combines capacitance of 1,000 µF at 75 V with ESR values down to 0.50 Ω at 120 Hz and +25°C, in D case size. Tantalum-cased electrolytic capacitors offer reverse voltage of 1.5 V at +85°C and thermal shock of 300 cycles. Operating over temperature range of -55 to +85°C, or +125°C with voltage derating, through-hole axial capacitors...

Read More »
Electronic Components & Devices

Aluminum Electrolytic Capacitors have screw terminal connections.

Rated for DC applications up to 550 V and ambient environments to 85°C, ALS60/61 Series are designed using electrolyte and foil technology to meet voltage, ripple current, and life requirements of electronics industry. Life expectancy is 18–20 Khrs at rated ripple current, and products can be optimized for specific application requirements. Industrial and commercial applications...

Read More »
Electronic Components & Devices

Shanghai ISSON Power Quality Co., Ltd. Deploys Maxwell Technologies' Ultracapacitors to Power Yangshan Deep-Water Port Electric Cranes

One of the world's largest ultracapacitor storage systems supports uninterrupted port operation SAN DIEGO -- Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading developer and manufacturer of ultracapacitor-based energy storage products, today announced Shanghai ISSON Power Quality Co., Ltd. installed 126 of Maxwell's 125V Heavy Transportation Modules in a power system that operates 26...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »
Snubber Capacitor mounts directly on IGBT module.
Electronic Components & Devices

Snubber Capacitor mounts directly on IGBT module.

Offered in flame-retardant plastic case with epoxy resin seal, Model MKP386M features capacitance range of 0.047–10 µF, operation to +105°C, and 7 voltage ratings from 700–2,500 Vdc and 420–800 Vac. Device reduces voltage and current spikes caused by switching of IGBTs, which are sources of EMI. With pulse strength to 2,500 V/µs and peak current capabilities to 1,850 A, metallized...

Read More »
Controls & Controllers

Maxwell Technologies Showcases Engine Start Module at Mid-America Trucking Show

Ultracapacitor solution in Class 6 to 8 trucks provides power to start trucks all the time in any weather SAN DIEGO- Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading developer and manufacturer of ultracapacitor-based energy storage products, today announced that it will exhibit at the Mid-America Trucking Show at the Kentucky Expo Center in Louisville, March 21 to 23. The annual event...

Read More »

Tecate's Family of AC Safety Capacitors for X and Y Class Applications Features both SMD MLLCs and Metallized Polypropylene Radial Box Capacitors
Electronic Components & Devices

Tecate's Family of AC Safety Capacitors for X and Y Class Applications Features both SMD MLLCs and Metallized Polypropylene Radial Box Capacitors

Parts Optimized for Use in AC/DC Power Supplies and RJ11 Applications San Diego, CA, -- Tecate Group, a leading global supplier of capacitors and supercapacitors, announced their extensive offering of AC Safety Capacitors for X and Y class applications.   Tecate's X/Y safety capacitor portfolio consists of the TYPE CMX multi-layer ceramic chip (MLLC) capacitors along with the TYPE MPX and...

Read More »
Surface-Mount Aluminum Capacitors operate up to 150
Electronic Components & Devices

Surface-Mount Aluminum Capacitors operate up to 150

Available in 6 case sizes ranging from 12.5 x 12.5 x 13 mm to 18 x 18 x 21 mm, 160 CLA Series is designed to meet IPC/JEDEC J-STD-020 soldering guidelines for severe reflow conditions. Polarized aluminum electrolytic capacitors feature max impedance of 0.035 Ω at 100 kHz, ripple current to 1.35 A, and useful life of 2,000 hr at +150°C. Designed with non-solid, self-healing electrolyte,...

Read More »
Electronic Components & Devices

Electrical Double-Layer Capacitors offer high power density.

Offering stable temperature characteristics and 40–60 mΩ resistance, DMF series can be charged and discharged frequently over -30 to +70°C operating range. Capacitance values of 330 and 470 mF support various energy requirement demands, and package thickness ranges from 2.5 mm ±0.2 mm to 3.2 mm ±0.2 mm. All products in series provide instantaneous maximum working voltage of 5.5 V and have...

Read More »
Dies & Stamping Services
Sponsored

Dies & Stamping Services

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics