Polymer Electrolytic Capacitors meet AEC-Q200 specifications.
Available in capacitances up to 330 Â-µF and rated voltages up to 16 V, T598 High Humidity/High Temperature Series exceeds humidity bias testing requirements of 85°C with 85% relative humidity in addition to delivering stable electrical performance at 125°C. Typical applications include decoupling and filtering of DC-to-DC converters in automotive infotainment and advanced driver...
Read More »
Snap-in Power Aluminum Electrolytic Capacitors have 500 V rating.
Supplied in blue sleeve-insulated, cylindrical aluminum case in 23 sizes from 22 x 25 mm to 35 x 60 mm, 157 PUM-SI series conserves board space in power supplies, industrial motor controls, and solar PV invertersÂ- by allowing designers to utilize one component instead of two 250 V capacitors. These polarized aluminum electrolytic capacitors with non-solid electrolyte are RoHS...
Read More »
Polymer Electrolytic Capacitors range from 2.5-50 Vdc.
Available in options up to 50 V for 12 V and 24 V power rails, T591 Series consists of solid electrolytic capacitors with conductiveÂ- polymer cathode capable of delivering very low ESR and optimized capacitance retention at high frequencies. Automotive-grade devices provide reliability when tested to 500 hr in 85°C with 85% RH. With capacitance up to 330 µF and...
Read More »
Wet Electrolytic Tantalum Capacitors operate up to 200°C.
Hermetically sealed in welded tantalum can and header assembly, TWA-Y Series is capable of up to 2,000 hours of operation with applicable derating. High capacitance cathode system enables high CV performance in standard DSCC case sizes spanning T1-T4. Manufactured in accordance with CECC 30 202-01 (EN 130202), series offers capacitance values from 150–1,000 Â-µF with ±10% or...
Read More »
Nylon Fasteners & Rivets: How Environmental Factors Impact Extraction Force
To learn more about what can affect your nylon fastener's extraction force, and how to avoid adverse side effects, download this white paper now.
Read More »Future Electronics Announces Vishay's TR3 Series 75V Molded Tantalum Capacitors
Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, recently announced immediate availability of Vishay's TR3 Series of 75V molded tantalum capacitors offering low ESR. Vishay's TANTAMOUNT®TR3 series of solid tantalum surface mount chip capacitors offers higher ratings up to 75V in the A, B, C, D, E, V and W case sizes. The TR3...
Read More »Vishay Intertechnology Enhances T55 Series of Polymer Tantalum Chip Capacitors With Higher Capacitance to 470 µF and Lower ESR to 25 mΩ in A, B, and T Case Sizes
MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that the company has enhanced its T55 series of vPolyTan™ surface-mount polymer tantalum molded chip capacitors with eight new ratings in the A, B, and T (low-profile B – 1.2 mm max.) case sizes. Taking advantage of Vishay's market-leading package technology and recent investments in polymer tantalum technology, the...
Read More »Engine Start Module targets industrial diesel equipment.
Suitable for cranes, backhoes, bulldozers, and off-road trucks, ultracapacitor-based 24 V Engine Start Module takes over engine cranking and starting function by remaining fully charged, even if battery voltage drops significantly. ULTRA 31/900/24V and ULTRA 31/1100/24V are available for starting diesel engines up to 12.5 L and 15.0 L, respectively. Performing normally over broad temperature...
Read More »
Snap-In Power Aluminum Capacitors come in cases down to 20 x 25mm.
Supplied in cylindrical aluminum case withÂ- pressure relief valve, insulated with blue PET sleeve, miniaturized 256 PMG-SI series offer capacitance from 820–47,000 µF, operating range of -40 to +105°C, and useful life of 2,000 hr at +105°C. There are 17 case sizes ranging from 20 x 25 mm to 35 x 45 mm, voltages vary from 16–100 V, and ripple...
Read More »
Solid Tantalum SMD Molded Chip Capacitors conserve PCB space.
While TMCJ and TMCP are respectively offered in J (1608-09) and P (2012-12) case sizes, TMCU comes in UA (3216-12) and UB (3528-12) package options. Each package conserves PCB space and offers profile thatÂ- optimizes mounting on mezzanine cards. RoHS-compliant products offer capacitance values from 0.1–220 µF, with tolerances down to ±10%, over 2.5–25...
Read More »Maxwell and Kenworth Offer Ultracapacitor-Based Engine Starting Module in New Trucks
Maxwell's Engine Start Module will be available on Kenworth's T680 and T880 SAN DIEGOÂ- – Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading developer and manufacturer of ultracapacitor-based energy storage products, today announced that its ultracapacitor-based Engine Start Module (ESM) will be offered as a factory-installed option on new Kenworth T680 and T880 trucks. Kenworth...
Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.
Read More »
