Fixed Capacitors

Wet Electrolytic Tantalum Capacitors operate up to 200°C.
Fixed Capacitors

Wet Electrolytic Tantalum Capacitors operate up to 200°C.

Hermetically sealed in welded tantalum can and header assembly, TWA-Y Series is capable of up to 2,000 hours of operation with applicable derating. High capacitance cathode system enables high CV performance in standard DSCC case sizes spanning T1-T4. Manufactured in accordance with CECC 30 202-01 (EN 130202), series offers capacitance values from 150–1,000 Â-µF with ±10% or...

Read More »
Fixed Capacitors

Future Electronics Announces Vishay's TR3 Series 75V Molded Tantalum Capacitors

Pointe Claire, QuebecÂ- – Future Electronics, a global leading distributor of electronic components, recently announced immediate availability of Vishay's TR3 Series of 75V molded tantalum capacitors offering low ESR. Vishay's TANTAMOUNT®TR3 series of solid tantalum surface mount chip capacitors offers higher ratings up to 75V in the A, B, C, D, E, V and W case sizes. The TR3...

Read More »
Fixed Capacitors

Vishay Intertechnology Enhances T55 Series of Polymer Tantalum Chip Capacitors With Higher Capacitance to 470 µF and Lower ESR to 25 mΩ in A, B, and T Case Sizes

MALVERN, Pa. — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that the company has enhanced its T55 series of vPolyTan™ surface-mount polymer tantalum molded chip capacitors with eight new ratings in the A, B, and T (low-profile B – 1.2 mm max.) case sizes. Taking advantage of Vishay's market-leading package technology and recent investments in polymer tantalum technology, the...

Read More »
Fixed Capacitors

Engine Start Module targets industrial diesel equipment.

Suitable for cranes, backhoes, bulldozers, and off-road trucks, ultracapacitor-based 24 V Engine Start Module takes over engine cranking and starting function by remaining fully charged, even if battery voltage drops significantly. ULTRA 31/900/24V and ULTRA 31/1100/24V are available for starting diesel engines up to 12.5 L and 15.0 L, respectively. Performing normally over broad temperature...

Read More »
Snap-In Power Aluminum Capacitors come in cases down to 20 x 25mm.
Fixed Capacitors

Snap-In Power Aluminum Capacitors come in cases down to 20 x 25mm.

Supplied in cylindrical aluminum case withÂ- pressure relief valve, insulated with blue PET sleeve, miniaturized 256 PMG-SI series offer capacitance from 820–47,000 µF, operating range of -40 to +105°C, and useful life of 2,000 hr at +105°C. There are 17 case sizes ranging from 20 x 25 mm to 35 x 45 mm, voltages vary from 16–100 V, and ripple...

Read More »
Solid Tantalum SMD Molded Chip Capacitors conserve PCB space.
Fixed Capacitors

Solid Tantalum SMD Molded Chip Capacitors conserve PCB space.

While TMCJ and TMCP are respectively offered in J (1608-09) and P (2012-12) case sizes, TMCU comes in UA (3216-12) and UB (3528-12) package options. Each package conserves PCB space and offers profile thatÂ- optimizes mounting on mezzanine cards. RoHS-compliant products offer capacitance values from 0.1–220 µF, with tolerances down to ±10%, over 2.5–25...

Read More »
Fixed Capacitors

Maxwell and Kenworth Offer Ultracapacitor-Based Engine Starting Module in New Trucks

Maxwell's Engine Start Module will be available on Kenworth's T680 and T880 SAN DIEGOÂ- – Maxwell Technologies, Inc. (Nasdaq: MXWL), a leading developer and manufacturer of ultracapacitor-based energy storage products, today announced that its ultracapacitor-based Engine Start Module (ESM) will be offered as a factory-installed option on new Kenworth T680 and T880 trucks. Kenworth...

Read More »
Snap-In Aluminum Electrolytic Capacitors are rated to 550 Vdc.
Fixed Capacitors

Snap-In Aluminum Electrolytic Capacitors are rated to 550 Vdc.

Designed for high ripple current applications, ALC10 SeriesÂ- feature surge voltage capability and extended life performance. Electrolyte allows voltage capabilities up to 550 Vdc in board-mountable form factor. With operational life up to 18,000 hr accommodating reliability-focused industrial and commercial applications, these snap-in aluminum electrolytic capacitors can be used in...

Read More »
Fixed Capacitors

Wet Tantalum Capacitor is approved to DLA 15005.

Featuring glass-to-tantalum hermetic seal, Model DLA 15005 is approved to Defense Logistics Agency drawing 15005. Electrolytic capacitor combines reverse voltage of 1.5 V at +85°C with optimized vibration capability and thermal shock of 300 cycles. Device operates from -55 to +85°C with current voltage of 75 V and capacitance of 1,000 Â-µF. Offered in axial T4 case size,...

Read More »
Fixed Capacitors

AC Motor Run Capacitors accelerate install with locking terminals.

Supplied in rugged, flame-retardant case, QPC Series operates from -25 to +85°C and offers locking push-wire contacts that accelerate installation and eliminate soldering. Users push and lock wire in place, and removal is accomplished by sliding probe tip into release port. Removable slide-lock metal mounting bracket, which can be mounted first, also accelerates assembly. Multiple contacts...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics