New Reliable Internet Stream Transport Protocol is Used for Low Latency and High Fidelity Transport of Video/Audio Signals Over The Internet
Encoders

New Reliable Internet Stream Transport Protocol is Used for Low Latency and High Fidelity Transport of Video/Audio Signals Over The Internet

9992-ENC series of encoders for openGear supports customizable I/O options and extensive audio support. Upgrades can support three additional 1080p60 signals for high-density workflows or one 4Kp60 signal. Outputs include two independent ASI ports and two Gigabit Ethernet ports for distribution flexibility, including direct streaming to CDNs.

Read More »
New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz
Encoders

New Model QDH20 Optical Encoder Offers a Frequency Response of 500 kHz

The Model QDH20 Optical Encoder features 0.375 in. diameter shaft and can be operated in temperatures up to 100°C. The encoder offers output that consists of quadrature A and B with standard reference pulse Z. The product provides configurable output with either standard 5 to 26 volt OL7272 line driver or open collector outputs. The device comes with two heavy-duty bearing sets and delivers a...

Read More »
New Encoders Provide up to 16 Bits Per Turn and 14 Bits of Turns Counting
Rotary Encoders

New Encoders Provide up to 16 Bits Per Turn and 14 Bits of Turns Counting

The MHM5 and MHK5 are a new series of Absolute Multi-Turn encoders from Sensata Technologies.  They are available with either Ethernet/IP or ProfiNet interfaces for Factory 4.0 applications and can provide up to 16 bits per turn and 14 bits of turns counting.  The encoders feature a reverse polarity, a short circuit protection and their design includes a geared turns counter that is immune to...

Read More »
New Encoder Features a Dual-Slot Card
Encoders

New Encoder Features a Dual-Slot Card

The 9992‑ENC from Cobalt Digital is a new series of encoders for openGear frames. They feature a dual-slot card for customized I/O options and audio support. The base model of the series supports both MPEG-2 and H.264, with low-latency 8-bit and 10-bit 4:2:0 encoding. It also includes a 3G-SDI input that supports one signal up to 1080p60 and two independent ASI ports as outputs. The 9992‑ENC...

Read More »
AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers
Stepper Motors

AutomationDirect Adds SureStep Stepping System Motors, Encoders and Inertia Dampers

New stepper motors, encoders and inertia dampers have been added to the SureStep® system of step motor control. SureStep series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4" wide) start at $22.00 and are available in single and dual shaft versions. The SureStep family has...

Read More »
New AMT21 Series Absolute Modular Encoders are Based on Capacitive ASIC Technology
Rotary Encoders

New AMT21 Series Absolute Modular Encoders are Based on Capacitive ASIC Technology

The AMT21 Series Absolute Modular Encoders provide 12 bits or 14 bits of absolute position information and implements a 14-bit signed number turns counter. The units enable user to keep track of position even during power down conditions. They can be operated in -40 to +105°C temperature range in either radial or axial orientations. The unit’s digital interface is used to set addresses for...

Read More »
CUI's Latest AMT Absolute Encoders Featured in THE EDGE by Future Electronics
Encoders

CUI's Latest AMT Absolute Encoders Featured in THE EDGE by Future Electronics

Montreal, Canada – October 9, 2018 – Future Electronics, a global leading distributor of electronic components, is featuring CUI’s AMT absolute encoders in the latest edition of THE EDGE. CUI’s AMT absolute encoders are a highly rugged and accurate position feedback solution, thanks to their capacitive sensing technology that offers resiliency to the dirt, dust, and oil typically...

Read More »
Latest EtherCAT Absolute Encoders Deliver Resolutions Up to 43 Bits
Encoders

Latest EtherCAT Absolute Encoders Deliver Resolutions Up to 43 Bits

The EtherCAT Absolute Encoders are available in Model A58HE and Model A58SE models and are designed for use in harsh factory and plant environments. The units are offered in 58 mm diameter housing and offer bore sizes up to 15 mm and shaft diameters up to 10 mm. The encoders can be operated in -40°C to 85°C temperature range and are rated to IP65 sealing. They provide CoE, FoE, EoE Ethercat...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics