Electrical Disconnects

Peerless Electronics Now Stocking Rugged Cole Hersee-Littelfuse Battery Disconnect Switch
Electrical Disconnects

Peerless Electronics Now Stocking Rugged Cole Hersee-Littelfuse Battery Disconnect Switch

The rugged 75920 Cole Hersee master disconnect switch has a high amperage capacity: 300A at 12V DC. This switch protects vehicles against tampering, theft and battery drain. Protects from hazards during vehicle servicing, and can be locked-out or tagged-out. 75920 provides an effective emergency power cutoff and can be used in both positive or in negative path applications. The Cole Hersee 75920...

Read More »
Rotary Disconnect Switches serve motor and general purpose tasks.
Electrical Disconnects

Rotary Disconnect Switches serve motor and general purpose tasks.

Suited for chemical, water, and food industries, KU-VKA series can be used for general-purpose disconnects or as manual motor disconnect switches for applications requiring non-fused power on-off switches or starting and stopping of motors. CE-compliant products,Â- along with general use rating of 16–150 A/600 Vac, feature snap-on auxiliary contacts. DIN rail and panel mount styles...

Read More »
Electrical Disconnects

Disconnect Switches target solar market.

Specifically designed for DC applications, OTDC Disconnect Switches include UL98B listed models up to 600 A as well as IEC 60947 versions rated at 630 and 800 A. Units are suited for disconnecting solar inverter from DC side and can be used in combiner boxes for switching of individual PV arrays. Series offers solutions for simultaneous switching of two 1,500 Vdc circuits up to 500 A as well as...

Read More »
Electrical Disconnects

Solar PV Components target 1,500 Vdc applications.

Intended for use in solar PV applications, 1,500 Vdc-rated components include such products as disconnect switches, molded case switches, contactors, surge protective devices, and voltage/current sensors. Some components are rated up to 3,000 A at 1,500 Vdc and carry various UL and/or IEC certifications. All are designed to meet development trends towards large-scale, 1,500 Vdc utility power...

Read More »
Peerless Electronics Now Distributing Kissling Battery Disconnect Switches
Electrical Disconnects

Peerless Electronics Now Distributing Kissling Battery Disconnect Switches

Kissling Electrotec manufacturers battery disconnect switches that range from 200 A to 500 A for the highest possible quality requirements in all marine applications. Options include single or dual pole configurations as well as various shapes and colors of the operating handles. Many of the Kissling battery disconnect switches from Peerless offer: • Environmentally sealed (IP67) • High...

Read More »
Manual Disconnect Switches withstand hostile environments.
Electrical Disconnects

Manual Disconnect Switches withstand hostile environments.

Measuring 4 x 5 in.,Â- HBD Series includes Models HBD21, HBD31, and HBD41 featuring 200, 300, and 400 A continuous current carry, respectively. Hermetically sealed contacts means users can be confident of low voltage drop, less than 50 mV at rated current, under any weather conditions including salt spray and temperatures from -55 to +85°C. Exceeding IP67 and IP69 requirements,...

Read More »
Fused Disconnect Safety System serves solar applications.
Electrical Disconnects

Fused Disconnect Safety System serves solar applications.

Capable of recombining up to 24, 1,000 Vdc inputs into one common bus output, Fused Disconnect Safety System (FDSS) 2 complies with NEC 2011 disconnect requirements and offersÂ- total capacity of 4,800 A. Visible blade disconnect promotes safety for all incoming PV arrays, and common output hardbuss bar facilitates installation with utility-scale inverters. Other features include...

Read More »
Peerless Electronics Expands Product Offering With Four (4) New Product Lines
Electrical Disconnects

Peerless Electronics Expands Product Offering With Four (4) New Product Lines

Peerless Electronics has signed distribution agreements and is now an authorized stocking distributor for these 4 new product lines. Hoffman EnclosuresÂ- – Hoffman is a division of Pentair and is a leader in the manufacturing of industrial enclosures. These include NEMA rated mild steel, non-metallic, stainless, aluminum, modular enclosures and more. Hoffman enclosures protect sensitive...

Read More »
Fused Disconnect Switch comes in polycarbonate enclosure.
Electrical Disconnects

Fused Disconnect Switch comes in polycarbonate enclosure.

Featuring across-the-line motor starting, KKVM series has general use rating of 30 A (3-pole, 600 Vac) and interrupting capacity rating of 10 kA. Knock-outs are located on top and bottom of enclosure, and auxilary contacts are available.Â- NEMA 4X/IP65 rating allows for indoor or outdoor use in automotive, chemical, packaging, or general manufacturing applications. Able to accept up...

Read More »
Modular 2-Pole Disconnect Switches achieve 1,000 Vdc rating.
Electrical Disconnects

Modular 2-Pole Disconnect Switches achieve 1,000 Vdc rating.

Designed for PV applications, 1,000 Vdc OTDC switches come inÂ- 250, 320, and 400 A versions that achieve 1,000 Vdc rating per UL 98B. Dual magnetic breaking design breaks circuit in 2 places, increasing air gap while reducing time to circuit isolation. Permanent magnets pull arc into arc chutes for accelerated extinguishing. Along with integrated heat sink,...

Read More »

All Topics