Trailer Connectors feature plug-and-tow cord.
Extending up to 3 ft, Jet Connex Trailer Connectors replace loose wires that hang down between vehicle and trailer with plug-and-tow coiled cord. Molded connectors on each end provide strong connection for running lights, turn signals, and brakes. Tightly coiled, jacketed, and mylar-wrapped multi-wire power cable includes integrated strain relief, eliminating broken or shorted wires in critical...
Read More »Stainless Steel Connector suits low loss coaxial cables.
Designed for LMR-400 series coaxial cables, TC-400-NMH-RA-SS (3190-1668) N male right angle passivated connector exhibits low loss and optimal VSWR performance through highest ISM frequency band of 5.8 GHz. LMRÃ-® cables are flexible, non-kinking, RF transmission line cables suitable for use as antenna feeders, system jumpers, and interconnects.
Read More »Plugs and Connectors feature watertight construction.
Perma-TiteÃ-® 2 plugs and connectors, rated NEMA Type 4, 4x, 6p, and IP 66 and 67, are UL listed and CSA certified. Configurations are from 15-30 A, up to 600 V, single- and 3-phase, and devices withstand hose-down pressures up to 1,000 psi. Color-coded, cord-grip bushings accommodate various cable diameters. Elastomeric housing has ergonomically designed finger grips and resists impact,...
Read More »Wall Outlet enables centrally managed Wi-Fi environment.
Wi-Jack(TM) integrates enterprise WLAN technology directly into office network wall outlet, enabling formation of high-capacity wireless environments. Structured wireless networking integrates AP functions into centralized control system that coordinates operation and optimization of entire wireless environment. Each unit comes with single radio that provides 802.11a or 802.11 b/g service....
Read More »Key Considerations for Medical PCB Assembly
This white paper provides an overview of key considerations for medical PCB assembly.
Read More »Electrical Connectors feature latching design.
Single and Multi-Gang 600 V Connectors lock tight and stay tight, but can be quickly unlocked by depressing insulated external button. They feature water-tight receptacles and male connectors, eliminating need for lugging or taping. Designed to ensure positive connecting, non-corroding electrical connection for high amperage power distribution, units are suited for industries that require...
Read More »Solderless Connectors facilitate field installation.
Suited for LMR-240 low-loss coaxial cable, EZ-240-SM straight and EZ-240-SM-RA right angle SMA plugs attach to cable without soldering. Center contact attaches to center conductor of cable via beryllium-copper spring fingers, and outer contact crimps onto outer braid of cable. Each connector comes with dual-wall, adhesive-lined shrink boot for strain relief and weather protection.
Read More »Solderless Connectors provide snap-on interface.
Suited for LMR-240 low-loss coaxial cable, QMA EZ non-solder connectors provide snap-on version of SMA interface. They are available in straight and right angle versions, designated EZ-240-QMAM (3190-1533) and EZ-240-QM-RA (3190-1539), respectively. LMRÃ-® cables are flexible, non-kinking, low-loss RF transmission line cables that are suitable for use as antenna feeders, system jumpers, and...
Read More »Connectors handle manufacturing environments.
Mechanically keyed Tuff-Link E-CON Connectors facilitate replacement of sensors, switches, and control components. Factory molded to cable, they feature nickel-plated brass couplers and IP 67 and NEMA 6 protection. Product line includes male and female plugs, straight and 90Ã-
Read More »Connector System offers positive pin options.
Micro-rugged, Q2(TM) Series QMSS/QFSS has signal pins on .025 in. pitch and .433 in. mated height. System is available with up to 160 I/Os per connector set in single-ended configuration and up to 64 pairs in differential pair configuration. It is hot-pluggable with shields and ground plane mating first, followed by signal pins. System offers various options such as positive alignment features,...
Read More »Precision 2.92 mm Connector suits 40 GHz applications.
Model RF29M-SR1 consists of 50 ohm, 2.92 mm precision connector that can be used up to 46 GHz. It conforms to IEEE 287 standard, is mechanically compatible with SMA and 3.5 mm connectors, and features shortened male pin that ensures non-destructive mating process. Designed for .085 in., semi-rigid and high-performance flexible cable assemblies, product has gold-plated body and pin with molded...
Read More »SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »