Electrical Bushings

Strain Relief Bushings protect cables at panel entry points.
Electrical Bushings

Strain Relief Bushings protect cables at panel entry points.

Available in 6/6 nylon, RDD Pigtail Lockit(TM) strain relief bushings absorb forces of pull, push, twist, and flex to securely anchor, insulate, and protect cables at panel entry points. They self-lock themselves onto cable and can be preassembled offline for final assembly at remote location. Integral nylon spring eases cable into lazy bend, prevents sharp bending, and assures long cable life.

Read More »
New Heyco Labkits Now Available For Product Design Departments, Experimental Labs, And Prototype Work
Electrical Bushings

New Heyco Labkits Now Available For Product Design Departments, Experimental Labs, And Prototype Work

Heyco Products, Inc., a leading ISO 9001:2000 US-based designer and manufacturer of wire protection products, has announced availability of seven LabKits for product design departments, experimental labs, and prototype work. The kit offerings include LabKit #1 (Stain Relief Bushings); LabKit #2 (Bushings); LabKit #3 (Hole Plugs); LabKit #5 (Wire Positioning); LabKit #7 (Rubber Grommets); LabKit...

Read More »
Strain Relief Bushings can be preassembled.
Electrical Bushings

Strain Relief Bushings can be preassembled.

Model RDD-601 Lockit(TM) Strain Relief Bushing fits round cables up to .700 in. and panel mounting holes up to 1.109 in. w/1.000 in. flats. Unit can be preassembled onto round or flat cables for final panel assembly or at any remote location, and can also be installed into standard Double D panel hole with simple fingertip pressure. Multiple panel locking steps secure unit into range of panel...

Read More »
Electrical Bushings

Bushings eliminate strain on round or flat cables.

Available in right angle configuration, RDD Lockit(TM) Strain Relief Bushings are suited for 90° strain relief applications through panels. Units can be pre-assembled onto round or flat cables offline for final panel assembly at later time, or at remote location. Bushings are also designed to install into standard normal or Double D panel hole with fingertip pressure. Multiple panel locking...

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
Clamps, Plugs, and Bushings suit commercial construction.
Electrical Bushings

Clamps, Plugs, and Bushings suit commercial construction.

Made of fire-rated plastic, AMP Connector Clamps secure and install nonmetallic sheathed cable to steel boxes or panels. Units accommodate 1 or 2 wires, are rated for 60 lb pull-out, and are available for Â-½ or ¾ in. knockout holes. Designed for plugging unused knockouts in boxes or panels, AMP Plugs fasten securely to any round open hole from ½-2 in. Offered in round or...

Read More »
Richco, Inc. Releases the SRB Series UL Approved Strain Relief Bushings
Electrical Bushings

Richco, Inc. Releases the SRB Series UL Approved Strain Relief Bushings

CHICAGO, IL - September 27, 2006 Richco, Inc. is pleased to announce that its strain relief bushing, the SRB Series, is now UL Listed - #E107293! The bushing absorbs the forces of push and pull that may be exerted on cords and cables. The SRPL-2 tool is required for installation and is sold separately. To review the complete SRB series or other bushings that Richco offers, please visit their...

Read More »
Rubber Rings and Bushings provide noise suppression.
Electrical Bushings

Rubber Rings and Bushings provide noise suppression.

Providing protection for loads ranging from 4-350 lb, A10R 4- Finger-Flex Series exhibits various natural frequencies depending on size and durometer hardness of isolator, which ranges from 30-60. Sizes include 13/16, 1 11/64, 1 3/8, 1 29/32 and 3 in. diameters with Â-¼, 3/8, 3/8, 9/16, and 5/8 in. bores, respectively. Units provide noise suppression in typewriters, printers, copiers, and...

Read More »
Custom Bushings suit thin-panel applications.
Electrical Bushings

Custom Bushings suit thin-panel applications.

Featuring one-finger locking mechanism, Single-Panel-Thickness RDD Lockit(TM) fills electrical cord openings and provides strain relief against wire twisting and pulling for thin-walled furniture-mounted task-lighting units and other electrical products. Bushings, molded of high-impact polyamide nylon, conform to ASTM standard D-4066-PA111, have flammability classification of 94V-2, and withstand...

Read More »
Electrical Bushings

Self-Locking Bushings offer wire and cable strain relief.

Designed for flat wires and cables ranging from 0.12 x 0.32 in. to 0.24 x 0.42 in., RDD Lockits(TM) fit into Double D holes, protecting current-carrying wires from twisting and other stresses that can cause electrical failure. Units and cord sub-assembly snap into place without any tools other than electrical pliers. Five-step locking mechanism allows range of panel thicknesses up to .157 in. and...

Read More »
Snub Bushings protects cable from rough panel edges.
Electrical Bushings

Snub Bushings protects cable from rough panel edges.

SC Snub Bushing series protects cable bundles from rough panel edges and provides light strain relief. With flexible inside diameter, users can slide cable into grommet and press part into mounting hole. Interior diameter material closes firmly against cable. Parts accommodate 1/32, 1/16, 3/32, and 1/8 in. panel thicknesses. Available in 3 sizes of cable holding diameters from 1/8-Â-¼ in.,...

Read More »

All Topics