Drill Bits

Drill Bits

Drill Bits are suited for cutting glass and tiles.

With 1/8 to 1 in. dia bit size, Glass and Tile Bits are equipped with 3-flat shank to reduce slippage. Tungsten carbide bits are diamond ground to precision point that eliminates walking, and its reinforced head prevents carbide from cracking. Suited for working with glass, ceramic walls, and ceramic floors, they can be used for cutting glass, bathroom installations, drilling, and fastening...

Read More »
Wood Boring Bits feature self-feeding design.
Drill Bits

Wood Boring Bits feature self-feeding design.

Suited for boring holes in wood for running pipe, tubing, and conduit, Bul-z-Eye(TM) Bits feature aggressive twin-edges with precision-ground teeth. Wobbling is eliminated by precision-machined shaft that achieves perfect bit concentricity, and by burr-free lead screw that feeds bit through wood at consistent rate. Available in 12 bit diameters ranging from 1 to 4 5/8 in., bits are 4 5/8 in. long...

Read More »
Drill Bits

BIG Kaiser Showcases the Newest in Precision Tooling at Westec Booth #2632

January 18, 2007 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at Westec 2008. Visit BIG Kaiser at Booth #2632 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's new C-Cutter Mini's compact design reduces the cutting diameter to the lowest limit, helping achieve ultra high spindle speeds and...

Read More »
Solid Carbide Drill is suited for HRSA machining.
Drill Bits

Solid Carbide Drill is suited for HRSA machining.

Engineered for aerospace and industrial gas turbine applications, CoroDrill Delta-C R846 features positive-tip geometry that maintains consistent curve along cutting edge, distributing cutting forces throughout body, resulting in minimum deflection and burr formation. Deep flute design optimizes chip removal, ensuring quick evacuation from cutting zone. Available in 3-12 mm dia range, bronze...

Read More »
Drill Bits

Solid Carbide Micro Drill comes with 3 mm reinforced shank.

Made of fine-grained solid carbide, Sphinx micro drill is available in 0.30-1.50 mm dia in steps of .01 mm and in standard lengths of 6 x D. Specially designed 2-flute geometry delivers point angle of 130 deg and helix angle of 35 deg for high precision and close tolerance. Drill can be run with or without coolant, and suits materials such as steel (including stainless), titanium/nickel alloys,...

Read More »
Drill Bits

Rugged P&H 250XP Drill Surpasses 1 Million Metre Mark

EAST KIMBERLY REGION, WESTERN AUSTRALIA - November 2007 - A diesel-hydraulic P&H 250XP hard rock production drill on September 25 surpassed 1 million metres of cumulative blast hole depth in service to a remote diamond mine operated by Argyle Diamonds Limited (ADL). Located in the rugged East Kimberley region of Western Australia and owned and operated by Rio Tinto Limited, the ADL mine is the...

Read More »
Drill Bits

DeWalt Launches New Line of Rock Carbide SDS Plus Drill Bits

- Masonry Bits Offer End Users Increased Durability, Life and Speed - November 2007 - DeWALT, a leading manufacturer of industrial power tools and accessories, announces the launch of its industrial-grade four flute, two-cutter ROCK CARBIDE® SDS Plus drill bits (DW5400-DW5470). Additionally, DEWALT is launching a new line of four-cutter SDS Plus drill bits (DW5471-DW5482). Available in...

Read More »
Drill Bits

Rotary Hammer Core Bits handle concrete and brick drilling.

Available in diameters from 1Â-½-6 in. and overall lengths of 12 and 22 in., carbide-tipped One-Piece Core Bits are sold in complete set with either SDS-Max or Spline drive shank. Bits are used by plumbing, electrical, and mechanical contractors in applications such as drilling for railing installations, relocating anchors, and through-wall drilling for electrical conduit, plumbing, and...

Read More »
Drill Bits

Spot Drill requires 1 insert with 2 cutting edges.

Radstar(TM) Spot Drill features 1 in. wide insert that fits into 1 in. dia holder, allowing user to spot hole up to and including this size. Carbide inserted drill is available with inserts of 90, 118, 120, 135, and 140Â-º drill points, which all fit the same holder. Also fitting the same holder, 30º chamfer insert for milling is available.

Read More »
Drill Bits

Diamond Drill drills 5/32 to ¾ in. diameter holes.

END 712 P Mini diamond drill is used for drilling dowel, anchor, and thru holes in tile, hard ceramic gres tiles, natural stone, granite, and concrete. Offering variable speed of 0-8,000 rpm, it drills without shock/hammering, eliminating cracks and blow-out. Features include 5 lb weight, 6.3 A motor with GFCI, built-in water swivel with hose connection and valve, keyless chuck, and depth gauge....

Read More »

All Topics