Diaphragm Pumps

Diaphragm Metering Pump has built-in leak detection system.
Diaphragm Pumps

Diaphragm Metering Pump has built-in leak detection system.

Suited for agricultural, automotive, and municipal water treatment industries, PHP-800 Series diaphragm metering pump is equipped with DFD (Diaphragm Failure Detection)system that shuts off pump head if any chemical leak occurs. Including digital touchpad and back-lit LCD display that shows output percentage as well as diaphragm failure alarm status, unit can pump up to 2,700 mL/min, and handles...

Read More »
Diaphragm Pumps are available in aluminum, cast iron, and SS.
Diaphragm Pumps

Diaphragm Pumps are available in aluminum, cast iron, and SS.

ARO Pro Series includes 2 and 3 in. pumps with 172 and 235 gpm capacities, respectively. Air valve technology eliminates pump stalling by utilizing unbalanced design, which, by creating optimal pressure differential, air valves do not center, even under low air inlet pressures. Pumps feature bolted construction as well as O-rings and U-cups that prevent air leakage by providing positive seal as...

Read More »
Diaphragm Pumps

Versa-Matic® Introduces New Shaft Wrench Flats

EXPORT, PA, December 04, 2007 -Versa-Matic® Pump, a recognized leader in the design and manufacturing of air-operated double diaphragm (AODD) pumps and accessories, announced today the addition of new shaft wrench flats for use with its entire line of Elima-Matic® and Ultra-Matic pumps. The shaft wrench flats allow for even faster disassembly of the diaphragm plates from the main...

Read More »
Diaphragm Pumps

Aluminum Diaphragm Pumps offer application flexibility.

With port size of 0.75 in. and leak-free, bolted construction, E7 series pumps are suited for use in lubrication, tire filling, adhesive dispensing, OEM systems, and other industrial applications. Elima-Matic® air valve system ensures non-stalling, non-icing, lube-free operation, while shoe-valve design prevents blow-by when pump is online but not in use. Series can be grounded and offers...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Diaphragm Pumps

Coolant Pump handles up to 1,000 psi pressure.

Suited for turning, milling, and grinding applications, MP-B series high-pressure coolant pumps use Hydra-Cell® diaphragm technology. Rugged, fixed, or variable volume pumps are built to handle abrasive particles found in machine tool coolant. In lathe and mill applications, pumps remove chips from even deep and blind holes, and also reduce cyclic cooling in milling applications. Units keep...

Read More »
Diaphragm Metering Pumps are hydraulically actuated.
Diaphragm Pumps

Diaphragm Metering Pumps are hydraulically actuated.

JaecoFram 1(TM) pumps feature heavy-duty, continuously lubricated gear reduction system as well as separate chambers for hydraulic fluid and gear lubricant. Hydraulic actuation of diaphragm minimizes fatigue and units also feature built-in hydraulic relief valve. Devices offer capacities from 0.8-56 gph at pressures up to 1,200 psi with accuracy of 0.5% at steady state. Capacity is manually...

Read More »
Metering Pump alleviates power comsumption concerns.
Diaphragm Pumps

Metering Pump alleviates power comsumption concerns.

Employing microprocessor that optimizes power consumption based on required back pressure, MAGDOS LT features chemical-resistant materials and hermetically sealed design suited for use with toxic and aggressive media. Manual speed control, as well as manual and step-less stroke length adjustment with 5:1 turndown ratio, promote application flexibility. Solenoid-driven diaphragm dosing pump has...

Read More »
Diaphragm Pumps meet CSA requirements.
Diaphragm Pumps

Diaphragm Pumps meet CSA requirements.

Powered by natural gas, Diaphragm Pumps feature ice- and stall-free design with bolted, all-metal construction for leak-tight integrity, delivering max material flow up to 133 lpm. By utilizing unbalanced valves, pumps create optimal pressure differential, ensuring that valves do not center and stall pump, even under low gas inlet pressures. Lube-free pumps are suited for fluid handling...

Read More »
Thomas Awarded Initiative Mid-Sized Companies Innovation Award for 1420 Series Pump
Diaphragm Pumps

Thomas Awarded Initiative Mid-Sized Companies Innovation Award for 1420 Series Pump

Thomas Products Division, a Gardner Denver Company, has received the Innovation Award of the Initiative Mid-Sized Companies in the medical category for the 1420 Series miniature diaphragm compressor and vacuum pump. Designed primarily for medical applications, the 1420 Series achieves higher flows than conventional standard diaphragm pumps of the same physical size. Manufactured in Puccheim,...

Read More »
Micro Diaphragm Pump doses small quantities of liquids.
Diaphragm Pumps

Micro Diaphragm Pump doses small quantities of liquids.

Requiring less than 1 W of power, Model NF5KTDC-B4 includes 12-24 Vdc input range motor and is suitable for pumping and dosing neutral and corrosive liquids. Control signal from 0-5 V controls motor's speed and flow rate between 5-70 ml/min. Integrated pulse generator enables operator to monitor motor speed of pump and keep track of liquid dosage. Featuring suction height of 13 ft water,...

Read More »

All Topics