New C-Series AODD Pumps from Almatec Come Increased Bolt Torque
Offered in C 40 and C 50 models with 1-1/2 in. and 2 in. sizes respectively. Consists of wetted housing parts made of abrasion-resistant polyethylene or chemically resistant PTFE. Features self-priming and dry run capabilities and are available with ATEX directive 2014/34/EU.
Read More »
New FK 1100 Diaphragm Liquid Pump is Self-priming with 13.5 inHg Suction Height
Reduces need for additional equipment, provides flexibility in planning and allows for fast and easy system integration. High-torque motor options provide continuous operation with up to 87 psig back pressure. Applications include transfer, recirculation, temperature management and aspiration of liquids in wide variety of industries.
Read More »
New Medium Pressure Pumps from Wanner Engineering Eliminate Hazardous VOC Emissions
Offered with seal-less design with flow rates up to 95 gpm and maximum pressure rating of 3500 psi . Designed for high-capacity applications such as salt water disposal, bulk transfer, salt water injection and hydraulic lifts in oil fields. Operate with closed or blocked suction line and can pump hot abrasive fluids.
Read More »
New FP 400 Diaphragm Pump Provides Pulsation Less than 150 mbar
IP65 rated pump handle viscosities up to 500 cSt with some flow rate reduction. Designed to provide gentle, low-shear conveyance of sensitive media. Features include low vibration, a noise level below 55 dBA and chemically resistant flow path material options for use with aggressive media.
Read More »
TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT
If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.
Read More »
New Wilden V150 Velocity Series Pump is Offered in Bore-Seal Design
The Wilden® V150 13 mm Velocity Series Pump is suitable for applications such as chemical dosing, surface treatment, lube oil and additive injection. The bore-seal design of the product eliminates leaks caused due to torque decay. The pump is equipped with simple air distribution system that consists of two moving parts. The detachable mounting foot allows the pump to be reoriented into a...
Read More »
KNF Introduces NMP830 Gas Pump That Produces a Pressure of Up to 3.0 psig
The NMP830 HP Gas Pump is designed for use in patient monitoring, wound and compression therapy, and respiratory care devices. The product is offered in a width of 31 mm and produces a free flow up to 5.5 L/min (single head) and 10 L/min (dual head). They are available with brushed and 2- or 4-wire brushless DC motors and produces vacuum down to 28.4 inHg.
Read More »
Wilden Introduces V150 Velocity Series Pump with a Detachable Mounting Foot
The V150 Velocity Series Pump is offered in 13 mm and 6 mm sizes that deliver a dry suction lift up to 4.3 m and 5.1 m respectively. The pump is equipped with simple air distribution system (ADS) that has two moving parts and features bore-seal design that eliminates leaks. These units come in polypropylene and PVDF construction with an Accu-Flo™ option. The detachable mounting foot of the pump...
Read More »
Hydro Systems Company's New Hydro Xtreme Electric Diaphragm Pump is Designed to Handle Harsh Chemicals
The new Hydro Xtreme electric diaphragm pump from Hydro Systems Company is equipped to handle water treatment chemicals, such as sodium hypochlorite, chlorine dioxide and hydrogen peroxide. It has a built-in microprocessor system control with an LCD display and can be programmed manually or with a water meter signal. The pump eliminates the need for squeeze tubes or additional controllers for...
Read More »
Graco's New Husky and SaniForce 2150e Pumps are Suitable for Handling Slurries
Husky and SaniForce 2150e Diaphragm Pumps include 1050e and 1040e models. Units are suitable for industries such as food, beverage, personal care and pharmaceutical. Husky and SaniForce pumps are manufactured to FDA standards and reduce the usage of energy by 80 percent compared to air-operated diaphragm pumps.
Read More »
SMALL BUT POWERFUL! The Miniature Diaphragm Pumps THOMAS by Gardner Denver has to Offer Impress with Optimum Performance
Sheboygan, WI, USA: November 2017 A comprehensive choice of diaphragm liquid and gas pumps in miniature form for Sterilizers, Anesthesia Monitoring, Dialysis, Gas Detection, Inkjet Printing and Industrial Washing – that is what THOMAS by Gardner Denver offers its customers. The pumps’ features are impressive: compact and lightweight, almost no sound or vibration, chemically resistant,...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
