New Controls and Controllers Products

Automation Controller provides web access.

Web enabled 5100 Series Blue Fusion controller supports IT and Web standards, including HTTP, XML, SOAP, and SMTP, providing direct read/write access to industrial data from desktop browsers. With its built-in 10/100 Base T Ethernet port, controller can be connected to Internet and/or existing intranets. DIN rail mountable controller has high-speed digital and analog I/O and high-performance...

Timer Controller works on pneumatic conveying systems.

Series DCT500 provides continuous or on-demand cleaning for receivers and pulse jet systems. Available in 4, 6 or 10 channels, each unit features 2 potentiometers for selecting time-on and time-off settings. High limit and Low limit control inputs are provided for use with on demand systems. For added safety, control circuitry, including control inputs, are isolated from line voltage.

Temperature Controller fits on DIN rail.

R6000 temperature controller accepts 8 channels of thermocouple and RTD inputs and has response time of 100 msec for 8 control zones. It features RS485, Modbus, Profibus DP, CAN and CANOpen interfaces; 16 digital I/O that are configurable for any zone; and LED status display for I/O. Four analog outputs are available as option. Applications include plastics injection molding, plastics extrusion,...

Crane Control operates up to four receivers.

telePilot uses Palm Pilot-® to program transmitter's synthesized frequency and on-board flash memory configuration via infrared signal. Watertight and submersible, transmitter features up to 5 motions and 2 speed operations. Gold contact metal switches have rated life of over 1 million cycles. telePilot receiver is synthesized and pre-wired for transfer switch.

Different Types of Rubber Gaskets and Applications

Rubber gaskets are a type of mechanical seal located in between mated parts, typically in static applications with flat surfaces like joints.

Position Control Sensors feature ASCII serial protocol.

Temposonics-® S Series ServoSensors combine sensor and embedded closed-loop position controller. ASCII protocol and Windows(TM) application setup software enable use of common translator software. Model SH rod style sensors are designed for internal mounting where high pressure conditions exist (5,000 psi continuous/10,000 psi spike). Model SP profile sensors are magnet-mounted and are used in...

Plastic Control Valves feature bellows seals.

Model l000B series low-flow control valves, available with PTFE bellows seals are suitable for corrosive applications. They feature all-plastic construction, various Cv's, and pneumatic or electronic operation. Permeation-resistant PTFE bellows seal is designed for use in hazardous or corrosive environments; back-up stem seal packing arrangement is incorporated in each valve for additional...

Motion Control Chip handles one stepping motor.

Single-axis PCD-4511, for two-phase unipolar or bipolar stepper motors, can output CW/CCW pulses or excitation signals directly to drive chips. It has sequence logic for full and half step modes, simultaneous start and stop, linear or S-curve acceleration and deceleration, idling pulse output for start, and various limit signals. Applications include semiconductor manufacturing, inspection...

Thermoelectric Module includes communications port.

Model 5C-195 Thermoelectric Module/Heater Controller AC input-variable DC output voltage controller for thermoelectric modules can be used for either heating or cooling applications. It accepts input voltages of 110/220 VAC, 50/60 Hz, and incorporates internal power supply that provides adjustable load circuit voltages from 3 to 16 VDC. 2 ampere maximum output current limits range from load...

Controllers come in 1/16 DIN package.

Models 1601E and 1603E feature built-in programming port for remote or OEM configuration. They allow users to save multiple programs for each individual product or shipment. Product parameters can be stored and saved electronically in service department files for later reference. PID control algorithms can be field configured for variety of functions including control of pressure, flow and level,...

Flow Control Cartridge regulates multiple hydraulic circuits.

FPC-10 provides precise flow regulation regardless of pressure differential. This makes it useful for circuits requiring constant flow under varying load conditions, such as multiple motor circuits working at different pressures where constant speed must be maintained on motors. It fits standard 10-2 generic cavity and has operating pressure of 0-3000 psi with flow rate of 0.5-6 gpm. Unit is...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.