Motion Controllers target motor manufacturers and OEMs.

ControlX dual-axis servo motion control board is network enabled and works as stand-alone or PC-based system in network of up to 32 ControlX modules. Product, available in varying power rating modes, also contains safety measures such as emergency stop; current, temperature, and over voltage sense; and braking facilities. Based on 32-bit DSP controller, product is controlled by drivers consisting...

Read More »
Software automates building management access control.

Software automates building management access control.

WAPAC-PRO handles over 4000 alarm inputs and relay outputs through use of card-holder technology. Based on Microsoft SQL Server, software is equipped with alarm graphics as well as alarm prioritization. It is expandable up to 80,000 card holders per unit. Features include real time communications, input/output mapping, and database integration capability with one-card systems.

Read More »
Temperature Controller is customizable for OEM equipment.

Temperature Controller is customizable for OEM equipment.

Model K1N fixed-setpoint temperature controller is designed to be embedded in OEM equipment that does not require visual display or operator interface. Key operating parameters, such as setpoint, PID, and alarm setpoint, can be set using detachable display board or iTools Engineering Software. Controller features PID control algorithm and supports multiple control outputs, alarm outputs, and...

Read More »
Scalable Control Modules suit motion control applications.

Scalable Control Modules suit motion control applications.

Integrated, closed-loop D425 and D445 can be connected and installed in Sinamics-S120 network. Former is suited for use in simple machines with up to 16 motion control axes, while latter suits high-end applications with up to 64 axes. When motion control performance of machine increases, Simotion D modules can be replaced without modifying remaining power modules. Also available, 25 mm wide CX32...

Read More »
Monitor Control System controls and automates bale pick-up.

Monitor Control System controls and automates bale pick-up.

BALER BOSS allows security control of access to use of balers and accountability of bales produced. Users can be added or locked out and controlled access to baler can be made with assigned ID entered on keypad or with Bale Pass. System will trigger automatic request for pick-up, sent to hauler/recycler's PC or fax. Bale Edge Software provides communication capability for one baler or thousands.

Read More »

Supervisor Chips suit any application requiring monitoring.

Offered in 24 models, Supervisor Chips, rated at 5 and 3/3.3 V, include power-on reset/low-voltage detect which monitors system power and resets system processor when voltage is out of tolerance. Some models include battery switchover circuit, which can be used to battery back other components in system. Most include PFI/PFO circuit, which implements early power-fail warning function or monitors...

Read More »
Modular Control System remotely controls air compressors.

Modular Control System remotely controls air compressors.

Regulus-® PLC-based modular control system features color graphical touchscreen HMI for user adjustment of set-points and control mode changes. Controls are adaptive, changing to meet specific user needs. System stores and logs operating data for trend monitoring and preventive maintenance. Unit is suited for operation close to surge lines to save power and minimize unloading, and lower...

Read More »
Hot Swap(TM) Controller includes on-chip, 8-bit ADC.

Hot Swap(TM) Controller includes on-chip, 8-bit ADC.

Available in 24-lead SO, Narrow SSOP, and 32-lead 5 x 5 mm QFN packages, LTC4260 incorporates I2C/SMBus compatible interface and ADC that monitors current and voltage. Product monitors for under/overvoltage conditions and uses its feedback and power good comparators to determine output voltage status. It disconnects load if it remains in current limit beyond adjustable time-out delay and can be...

Read More »
Conductivity Controller accepts RTD sensors for ATC.

Conductivity Controller accepts RTD sensors for ATC.

CON 2000 -½-DIN Controller features 7 measurement ranges from 0-2 -µS/cm to 0-1,000 mS/cm. It offers on/off, proportional, or proportional integral control modes with pulse length or pulse frequency options, and accepts 2- or 4-cell conductivity electrodes with cell constants between K=0.01 and K=10. Programming and calibration data are protected by 2-level passwords and are stored in...

Read More »
Microcontroller has 8-bit CoolRISC CPU core.

Microcontroller has 8-bit CoolRISC CPU core.

Offering up to 22 Kbytes FLASH memory, EM6812 integrates powercheck and brownout functions, delivers up to 2.5 MIPS, and achieves 2,200 MIPS/W. It features supply voltage range of 2-5.5 V and 8-level supply voltage level detection. Consuming 120 -µA from 3 V supply in active mode operating at 1 MHz and 0.8 -µA in standby mode at 32 kHz, product suits portable, battery-powered applications in...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics