Temperature Controllers feature 18-bit A/D converter.

Temperature Controllers feature 18-bit A/D converter.

Offering digital MODBUS communications, -¼ DIN Model ETR-4300 and 1/8 DIN Model ETR-8300 provide 4 programmable outputs for heating, cooling, and/or alarms. Inputs feature field-programmable selection of 9 thermocouple sensors, 2 RTD curves, and 6 linear process inputs. Bumpless Transfer safety feature proportions main output upon error mode or sensor break conditions. SpecView RS-232/485 option...

Read More »

Programmer and Starter Kit support FPGAs.

FlashPro3 Device Programmer supports company's flash-based ProASIC3 and ProASIC3E FPGA families. Compatible with high-speed USB 2.0 specification, Kit allows engineers to design and program nonvolatile devices as well as examine secure in-system programmability using AES encryption. Also, by connecting programmer to FPGAs already soldered on board using JTAG 10-pin interface, FlashPro3 may be...

Read More »

Intellectual Property Cores support FPGA devices.

DirectCore and CompanionCore IP Portfolios offer 90 intellectual property cores to support company's ProASIC3 and ProASIC3E device families. Ported cores leverage features of devices, including 66 MHz 64 bit PCI performance, on-chip user flash memory, enhanced I/O and memory, and secure in-system programmability. Applications include telecommunications, consumer multimedia, networking, industrial...

Read More »
Microcontroller targets battery-operated devices.

Microcontroller targets battery-operated devices.

Eight-pin Model EM6580 combines 4-bit ADC or 12-level voltage level detector and on-chip Flash memory in SO-8 package. It consumes 3.3 -µA in standby mode, 5.8 -µA in active mode, and requires no external components. Supported by Windows-based simulator and emulator tools, unit features 4 k x 16-bit flash memory, 5 or 6 I/Os with 2 high drive outputs of 20 mA, power-on-reset with power-check...

Read More »
DC/DC Controller eliminates need for transformers.

DC/DC Controller eliminates need for transformers.

Using 2 inductors, step-up, 2-phase Model LT3782 can regulate 50 V output at 4 A load current with 96% efficiency from input source of 10-36 V. Unit includes adjustable slope compensation, time delay, and undervoltage lockout, as well as synchronous operation and clock synchronization. Operating from input range of 6-40 V, Model LT3782 uses constant frequency 150-500 kHz current mode...

Read More »
Limit Controllers utilize optional output cards.

Limit Controllers utilize optional output cards.

Plus Series 1/16, 1/8, and -¼ DIN Controllers shut down process if parameters exceed preset limits. To prevent safety hazards and equipment damage in oven/furnace, plastics, and packaging industries, they have latching relay that cannot be reset until process is in safe condition. Units offer auto-detection of hardware modules, front panel HMI with dual display, and PC configuration software. A...

Read More »
Integrated Stepper Module controls up to 5 stepper motors.

Integrated Stepper Module controls up to 5 stepper motors.

Five Axis Integrated Stepper Module runs on distributed block I/O network, and consumes 3 of 77 available block I/O slots in control system. It includes stepper translator so output is connected directly to stepper motor eliminating need for stepper drive. Five channels of SSI encoder feedback are available for position verification of each stepper motor being controlled. Stepper motion profiles...

Read More »
Motion ICs directly support CANbus interface.

Motion ICs directly support CANbus interface.

Available in 1- to 4-axis configurations, Magellan programmable motion processors control dc brush, brushless dc, microstepping, and pulse and direction motors. They provide profile generation, servo loop closure, PLC-style signal manipulation, and motor signal generation. Featuring programmable PID filter with velocity and acceleration feedforward, ICs also offer 32-bit position error, dual...

Read More »

Motion Control Toolkit works in IEC61131-3 environment.

Motion Control Solution incorporates normative functionalities based on published PLCopen recommendations. Complete set of motion control function blocks supplied by PLCopen is integrated into ISaGRAF toolset ready-to-use. It offers standardization of programming languages and interface toward different motion control solutions allowimg hardware independence and reusability of software...

Read More »
Transmitter/Controller accepts up to 3 chlorine probes.

Transmitter/Controller accepts up to 3 chlorine probes.

MicroChem(TM)2, available with reagentless, free, and total chlorine probes, features multiple measurement capability and single or dual PID control outputs. Enabling continuous online measurement and control of chlorine dosage, CL4000 probes are designed for bufferless operation and have no moving parts. Multi-parameter, multi-channel system is capable of receiving inputs from up to 3 sensors...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics