Pharos(TM) LPC X Controls a Cloudburst at Heathrow

(23 May 2008) -- The cloud that hangs at London's Heathrow Airport has a silver lining -- a stunning display for weary travelers' eyes. 'Cloud,' the five-meter-long digital sculpture by the international art and design firm Troika, hangs in the atrium to British Airways' luxury lounges at Heathrow's new Terminal 5. Evoking the electronic displays on old-fashioned arrival and departure boards,...

Read More »
Temperature Limit Controller is FM approved and CE compliant.

Temperature Limit Controller is FM approved and CE compliant.

Featuring universal input, single relay output, digital input for remote reset, timer, and register, CN6221 Series can be configured as high or low limit controller. Targeting water, chemical, plastics, automotive, and food processing industries, 1/16 DIN limit controller is suited for situations where high/low limit shutdown or alarm is required for general temperature control. Optional features...

Read More »

Xtralis Focuses on New Generation of Integrated Security Solutions at IFSEC 2008

Xtralis is following up on recent acquisitions with the launch of enterprise-wide security solutions to complement its existing ADPRO product range (Stand 11063, IFSEC, 12-15 May, 2008) Xtralis, the fire and security solutions provider, is to further increase its solutions capabilities and complement its range of ADPRO video surveillance systems with the launch of a new series of access control...

Read More »

Bus Terminal controls speed of single-phase AC motor.

Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed...

Read More »
Safety Contact Strips optimize safety on moving parts.

Safety Contact Strips optimize safety on moving parts.

Offered in EPDM for resistance to ozone and weathering, Model SGE-88 mounts with double-sided tape, while Model SGE-1510 mounts with integrated angle on profile. Units are protected from damage by outer covering of non-conductive rubber that allows actuation angles up to 90°. If moving part with safety edge strikes operator, or vice versa, safety edge is depressed and will send signal to power...

Read More »
Jet Edge Exhibiting Cutting-Edge Waterjet Technology at IMTS Booth #B-6252, September 8-13

Jet Edge Exhibiting Cutting-Edge Waterjet Technology at IMTS Booth #B-6252, September 8-13

See Jet Edge's New 90,000psi Intensifier Pump and Michael Waltrip's Napa 55 Car! (ST. MICHAEL, Minn. - June 25, 2008) -- Jet Edge, Inc. will demonstrate its latest waterjet cutting technologies at the International Manufacturing Technology Show (IMTS), Sept. 8-13 at McCormick Place in Chicago, Ill. During IMTS, Jet Edge will showcase its versatile High Rail Gantry precision waterjet cutting...

Read More »

ARM7(TM)-Based MCU offers FPGA interface to multilayer AHB.

Offering engineering-free migration path to lower-power, customizable MCU, AT91CAP7E features direct FPGA interface that makes FPGA look and work as if it is on internal bus of MCU. This 2-chip, no-NRE, FPGA-plus ARM7 solution includes 6-layer advanced high-speed bus (AHB), peripheral DMA controller, and 160 KB on-chip SRAM. Integrated peripherals include USB 2.0 full speed device, SPI...

Read More »

Software balances process and safety system integration.

Integrated with Process Knowledge System, Safety Manager allows safety and process controllers to communicate with each other without depending on intermediate interfaces or compromising operations security. In sharing information between Safety Manager and Experion C300 process controller, system can provide plant-wide safety instrumented system point data, diagnostics, alarms and events,...

Read More »
Press Brake Control System facilitates input and operation.

Press Brake Control System facilitates input and operation.

Used on PPEB and Easy-Form series press brakes, CADMAN® Touch combines CNC technology and IR touch screen programming system running on Windows® XP embedded PC-based control unit. It works with LVD integrated intelligent bending database and on-board LVD CADMAN-B 3D (bending) software, creating and storing interactive integrated databases for bend allowance, angle corrections, and spring-back....

Read More »

Process Control offers insight into plant operations.

Experion® allows plant operators to coordinate process control, safety shutdown, as well as fire and gas mitigation steps. In addition to the safety instrumented system integration, this Process Knowledge System helps improve plant operations via embedded simulation capabilities used for operator training and control, display, and procedure validation. It also offers integrated batch...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics