Mini-ITX System Controllers have wall mount form factors.

Mini-ITX System Controllers have wall mount form factors.

Powered by Intel-® Core(TM) i3/i5/i7 CPUs, AIS-Q572 and AIS-Q574 incorporate Intel Q57 chipset with dual display support. Both offer 2 LAN ports - 10/100/1000Base-TX Ethernet and RJ45 - for connectivity, 8 COM and 2 USB 2.0 ports for I/O, as well as one PCIe x16 and one PCIe x4 slot for expansion. AIS-Q572 offers 3.5 in. HDD, while AIS-Q574 offers two 3.5 in. HDDs and SATA 3.0 Gbps interfaces....

Read More »

Smart-Card IC supports metro traveler services.

Supporting Calypso Rev 3 ticketing open standard, CD21-Rev3 Secure Microcontroller provides secure platform for extra e-purse and mobile-payment services. Equipped with ST23 secure processor core, IC features dual interface for contact or contactless applications and is available with 3 EEPROM density options of 4, 8, or 18 KB. Backward compatibility with legacy readers enables adoption of...

Read More »
MCU Evaluation Board leverages Cortex M3 microcontroller.

MCU Evaluation Board leverages Cortex M3 microcontroller.

Used to evaluate Cortex-M3-based LPC1800 MCUs' main features, LPC1850 board comes with 150 MHz LPC1850, 64 MB SDRAM, 32 MB parallel Flash, 512 kB SRAM, and serial EEPROM. It can be operated over USB, external power supply, or PoE. For debugging, board contains JTAG and 20-pin Cortex Debug Connector with ETM, and all communication channels - USB, Ethernet, OTG, UART, and CAN - are provided. DSP...

Read More »

Flash Networks Announces Interoperability with the Alcatel-Lucent 5780 Dynamic Services Controller

Harmony Mobile Internet Services Gateway enables enforcement of smart traffic management policies HERZLIA, Israel - Flash Networks, a leading global provider of intelligent mobile Internet solutions, announced today that it has successfully completed interoperability testing of its Harmony Mobile Internet Services Gateway with the Alcatel-Lucent 5780 Dynamic Services Controller (DSC), a 3GPP...

Read More »

Goodrich Selected for Embraer KC-390 Primary Flight Control System

CHARLOTTE, N.C. - Goodrich Corporation (NYSE: GR) announced today that it has been selected by Embraer to provide the primary flight control system for the new Embraer KC-390 jet transport aircraft. Under the agreement, Goodrich will design and manufacture a new, fully-integrated, fly-by wire, primary flight control system comprising state of the art electro-hydrostatic actuators (EHAs),...

Read More »

LSI First to Sample 12Gb/s SAS RAID-on-Chip, Controller, and Expander ICs to Server and External Storage OEMs

Technology demonstrations for OEM customers break the million IOPS performance barrier with a single 8-port RAID-on-Chip IC MILPITAS, Calif. - LSI Corporation (NYSE: LSI) today announced the industry's first sample shipments of 12Gb/s SAS RAID-on-Chip (ROC), controller and expander ICs to server and external storage OEMs, underscoring LSI® leadership in the SAS market segment. By providing...

Read More »
Door Controller expands capabilities of hardwired systems.

Door Controller expands capabilities of hardwired systems.

Extending benefits of key-centric solution to hardwired systems, Cyberlock Flex System Door and I/O Module can activate variety of relay-based devices, from electric door strikes to security cameras and remote alarms that prompt security response. It can receive input from Request to Exit and Wiegand(TM) compatible access devices as well as door sensors. Operating in background, CyberLock Flex...

Read More »
New Motor and Gear Unit Packages will Allow Integrators to Easily and Economically Create Custom External Axis Systems

New Motor and Gear Unit Packages will Allow Integrators to Easily and Economically Create Custom External Axis Systems

Packages to simplify design, optimize performance and cost-efficiency AUBURN HILLS, Mich. - ABB Robotics, a leading supplier of industrial robots, is introducing standardized packages of its well-proven motor and gear units to allow integrators to easily and economically create custom external axis systems. Already an integral component of ABB's range of positioners and robots, the motor and gear...

Read More »

All-In-One Machine Controller Simplifies Development of Advanced New Plasma Tube Cutter

* five motion axes and I/O are managed by compact real-time controller Fort Smith, AR, July 25, 2011 - An innovative new plasma cutting machine for flue pipes has been developed by Techserv Cutting Systems, the specialist manufacturer of CNC profile cutting systems. Advanced interpolated motion of the cutting system is used to dramatically increase production throughput - using an economic...

Read More »
Teledyne Hastings Instruments Announces 24 VDC Version for 200 Series Mass Flow Meters and Flow Controllers

Teledyne Hastings Instruments Announces 24 VDC Version for 200 Series Mass Flow Meters and Flow Controllers

HAMPTON, VA. - Teledyne Hastings Instruments (THI) has recently introduced a 24 VDC version of the 200 series mass flow meters and mass flow controllers. The 24 VDC option provides users with a convenient connection to PLC's and for other installations (e.g., gas skids, instrumentation chassis...) where bipolar +/- 15 VDC is not readily available. The 24 VDC version continues to offer the same...

Read More »

All Topics