Conduit Bodies come with epoxy-free, uncoated finish.
Available in 7 configurations ranging from Â-½-4 in. trade sizes, Model FM9(TM) conduit bodies are forged from copper-free aluminum for lightweight mounting and corrosion resistance. Suited for Class I, Division 2 applications, products feature wiring cavity along with domed cover, and use stainless steel pan-head cover screws. They help electricians tackle wide range of jobs encountered...
Read More »
Weld Wire Conduit is protected against spatter damage.
Conduit Armor(TM) is coated to prevent melting in high-temperature and high-spatter areas in or near weld cell. Able to reduce pull on feed motor by up to 4 lb, this UL-94-VO compliant product is available as option on blue polymer conduit and comes standard on extra flexible conduit in bulk or pre-cut lengths.
Read More »
Unjacketed Flexible Steel Conduit is for non-UL applications.
Made of corrosion resistant, hot-dipped galvanized steel strip, type FSC flexible conduits feature profile and helical shape that allows it to withstand substantial impact and crushing forces. Available in 3/8-4 in. sizes, unjacketed, non-combustible conduits are able to make tight bends and are suited for high temperature applications.
Read More »
Clamped Duct carries mists, fumes, dust, and trim scrap.
Designed to hasten installation and facilitate system modification, Clamp-Together Duct is available in 24-10 gauge thick galvanized or stainless steel in 1 in. dia increments from 3-24 in. It is assembled with lifetime-guaranteed Forever Clamp and suited for any negative-pressure ventilation system up to 40 in. wg with entrained dust, sand, fumes, mist, smoke, chips, or trim scrap. Adjustable...
Read More »
Maximizing the Recovery of Platinum Group Metals (PGMs) from your Spent Catalysts
Making a decision about how to dispose of your spent precious metal catalysts? Download now to find out more about precious metal refining, the responsible and profitable solution.
Read More »Wiring Ducts come in full range of sizes.
Available in sizes from 1.5 x 2 in. to 4 x 4 in., PANDUCT® Type H Hinged Cover Wiring Ducts are based on standard compliant wide-slotted channel for routing and protecting electrical wiring or low voltage cabling. Units are UL recognized, CE compliant, and CSA approved with UL 94 flammability rating of V-0.
Read More »
Type A Conduit and Connectors endure continuous flexing.
Constructed using flexible PVC cover with woven nylon web bonded to smooth and seamless flexible PVC inner core, Type A nonmetallic conduit retains original shape even after being compressed. It comes in sizes from 3/8-2 in. and operates over -20 to +60°C range. Type A liquid tight connectors feature ferrous construction with nylon-insulated throat and include Santoprene® sealing...
Read More »
Connectors and Conduit endure continuous flexing.
Able to withstand vibration and corrosive environments, Type A Liquidtight Connectors and Conduit are suited for cable carrier installation, robot assembly, automotive applications, as well as outdoor signs and lighting at more than 1,000 V. Ranging from 3/8-2 in., conduit is constructed of flexible PVC cover with woven nylon web bonded to seamless flexible PVC inner core. Ferrous connectors have...
Read More »
Square D® Square-Duct Galvanized Steel Wireway
COMBINES CORROSION RESISTANCE WITH INCREASED ASSEMBLY EASE PALATINE, Ill. - December 20, 2005 - Square D® SQUARE-Duct® NEMA Type 1 galvanized steel wireway combines corrosion resistance with greater assembly ease. Because wireway sections and fittings are completely open on one side, no pulling through of wires and cables is required; they can be simply laid into the wireway without fear of...
Read More »Silicone Fiberglass Duct provides air/fume extraction.
Designed for vehicular exhaust extraction and high-temperature air transfer, single-ply U-Lok 440 features flexible Mechanical Lock Construction(TM), which provides tear and tensile strength, eliminating wire movements. Available in diameters from 2-20 in. and length of 25 ft, U-Lok 440 is rated for temperatures from -60 to +500°F. Applications include high temperature air supply, exhaust...
Read More »Wire Duct includes non-slip flush cover.
Available in sizes from 1.00 x 1.50 in. to 4.00 x 4.00 in., thin-finger Series T1E is made of rigid PVC and carries UL 94V0 flammability rating. Rounded, burr-free edges will not cut installer's hands or wire insulation, and restricted slot design retains wires, facilitating installation or removal. Duct is scored with 2 break lines, 1 for break-off and removal of sidewall finger segments, and...
Read More »
High or Low Volume Custom Crates and Boxes Available from Reid Packaging
Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.
Read More »
